Dupilumab-associated ocular surface disease : an interdisciplinary decision framework for prescribers in the Australian setting

Background/Objectives: Dupilumab-associated ocular surface disease (DAOSD) is of particular relevance in patients with atopic dermatitis (AD). Guidance on DAOSD assessment and management in the Australian setting is needed to reduce its impact and minimise disruption to treatment. Methods: A systematic review of the literature was undertaken to identify data pertaining to the incidence, pathophysiology, risk factors and management of DAOSD. A critical review of this literature was used to inform a decision framework for dupilumab-prescribers and develop a graded severity scoring tool to guide appropriate management options. Results: DAOSD typically emerges within 4 months of commencing dupilumab and the occurrence of new events diminishes over time. The reported incidence varies widely depending on the nature and source of the data: 8.6–22.1% (clinical trials programme), 0.5–70% (real-world data; differences in study size, duration of follow-up, ophthalmologist intervention, use of prophylaxis). Occurrence increases with AD severity and in patients with prior history of ocular disease; pathophysiology is still to be fully characterised. Management options have evolved over time and include lubricants/artificial tears, corticosteroids, calcineurin inhibitors, antihistamines, anti-inflammatory agents and antimicrobial agents. Current therapies aim to resolve symptoms or reduce severity to levels sufficiently tolerable to enable continuation of dupilumab therapy. Conclusions: Recommendations for DAOSD assessment and management include identification of high-risk patients, vigilance for red flags (keratoconus, herpetic and bacterial keratitis), regular assessment of symptom severity (before and during dupilumab therapy), conservative management of mild DAOSD by the prescribing physician and ophthalmologist referral for collaborative care of moderate–severe DAOSD and high-risk patients

Impact of efalizumab on patient-reported outcomes in high-need psoriasis patients: results of the international, randomized, placebo-controlled Phase III Clinical Experience Acquired with Raptiva (CLEAR) trial [NCT00256139]

BACKGROUND: Chronic psoriasis can negatively affect patients' lives. Assessing the impact of treatment on different aspects of a patient's health-related quality of life (HRQOL) is therefore important and relevant in trials of anti-psoriasis agents. The recombinant humanized IgG(1 )monoclonal antibody efalizumab targets multiple T-cell-dependent steps in the immunopathogenesis of psoriasis. Efalizumab has demonstrated safety and efficacy in several clinical trials, and improves patients' quality of life. Objective: To evaluate the impact of efalizumab on HRQOL and other patient-reported outcomes in patients with moderate to severe plaque psoriasis, including a large cohort of High-Need patients for whom at least 2 other systemic therapies were unsuitable because of lack of efficacy, intolerance, or contraindication. METHODS: A total of 793 patients were randomized in a 2:1 ratio to receive efalizumab 1 mg/kg/wk (n = 529) or placebo (n = 264) for 12 weeks. The study population included 526 High-Need patients (342 efalizumab, 184 placebo). The treatment was evaluated by patients using the HRQOL assessment tools Short Form-36 (SF-36) and Dermatology Life Quality Index (DLQI). Other patient-reported assessments included the Psoriasis Symptom Assessment (PSA), a visual analog scale (VAS) for itching, and the Patient's Global Psoriasis Assessment (PGPA). RESULTS: Efalizumab was associated with improvements at Week 12 from baseline in patient-reported outcomes, both in the total study population and in the High-Need cohort. Among all efalizumab-treated patients, the DLQI improved by 5.7 points from baseline to Week 12, relative to an improvement of 2.3 points for placebo patients (P < .001). Corresponding improvements in DLQI in the High-Need cohort were 5.4 points for efalizumab compared to 2.3 for placebo (P < .001). Improvements from baseline on the SF-36, PSA, PGPA, and itching VAS at Week 12 were also significantly greater in efalizumab-treated patients than for placebo. CONCLUSION: A 12-week course of efalizumab improved HRQOL and other patient-reported outcomes in patients with moderate to severe plaque psoriasis. The benefits of efalizumab therapy in High-Need patients were similar to those observed in the total study population, indicating that the beneficial impact of efalizumab on QOL is consistent regardless of disease severity, prior therapy, or contraindications to previous therapies

Phase 3 trials of ixekizumab in moderate-to-severe plaque psoriasis

BACKGROUND Two phase 3 trials (UNCOVER-2 and UNCOVER-3) showed that at 12 weeks of treatment, ixekizumab, a monoclonal antibody against interleukin-17A, was superior to placebo and etanercept in the treatment of moderate-to-severe psoriasis. We report the 60-week data from the UNCOVER-2 and UNCOVER-3 trials, as well as 12-week and 60-week data from a third phase 3 trial, UNCOVER-1. METHODS We randomly assigned 1296 patients in the UNCOVER-1 trial, 1224 patients in the UNCOVER-2 trial, and 1346 patients in the UNCOVER-3 trial to receive subcutaneous injections of placebo (placebo group), 80 mg of ixekizumab every 2 weeks after a starting dose of 160 mg (2-wk dosing group), or 80 mg of ixekizumab every 4 weeks after a starting dose of 160 mg (4-wk dosing group). Additional cohorts in the UNCOVER-2 and UNCOVER-3 trials were randomly assigned to receive 50 mg of etanercept twice weekly. At week 12 in the UNCOVER-3 trial, the patients entered a long-term extension period during which they received 80 mg of ixekizumab every 4 weeks through week 60; at week 12 in the UNCOVER-1 and UNCOVER-2 trials, the patients who had a response to ixekizumab (defined as a static Physicians Global Assessment [sPGA] score of 0 [clear] or 1 [minimal psoriasis]) were randomly reassigned to receive placebo, 80 mg of ixekizumab every 4 weeks, or 80 mg of ixekizumab every 12 weeks through week 60. Coprimary end points were the percentage of patients who had a score on the sPGA of 0 or 1 and a 75% or greater reduction from baseline in Psoriasis Area and Severity Index (PASI 75) at week 12. RESULTS In the UNCOVER-1 trial, at week 12, the patients had better responses to ixekizumab than to placebo; in the 2-wk dosing group, 81.8% had an sPGA score of 0 or 1 and 89.1% had a PASI 75 response; in the 4-wk dosing group, the respective rates were 76.4% and 82.6%; and in the placebo group, the rates were 3.2% and 3.9% (P<0.001 for all comparisons of ixekizumab with placebo). In the UNCOVER-1 and UNCOVER-2 trials, among the patients who were randomly reassigned at week 12 to receive 80 mg of ixekizumab every 4 weeks, 80 mg of ixekizumab every 12 weeks, or placebo, an sPGA score of 0 or 1 was maintained by 73.8%, 39.0%, and 7.0% of the patients, respectively. Patients in the UNCOVER-3 trial received continuous treatment of ixekizumab from weeks 0 through 60, and at week 60, at least 73% had an sPGA score of 0 or 1 and at least 80% had a PASI 75 response. Adverse events reported during ixekizumab use included neutropenia, candidal infections, and inflammatory bowel disease. CONCLUSIONS In three phase 3 trials involving patients with psoriasis, ixekizumab was effective through 60 weeks of treatment. As with any treatment, the benefits need to be weighed against the risks of adverse events. The efficacy and safety of ixekizumab beyond 60 weeks of treatment are not yet known

On the mechanisms governing gas penetration into a tokamak plasma during a massive gas injection

A new 1D radial fluid code, IMAGINE, is used to simulate the penetration of gas into a tokamak plasma during a massive gas injection (MGI). The main result is that the gas is in general strongly braked as it reaches the plasma, due to mechanisms related to charge exchange and (to a smaller extent) recombination. As a result, only a fraction of the gas penetrates into the plasma. Also, a shock wave is created in the gas which propagates away from the plasma, braking and compressing the incoming gas. Simulation results are quantitatively consistent, at least in terms of orders of magnitude, with experimental data for a D 2 MGI into a JET Ohmic plasma. Simulations of MGI into the background plasma surrounding a runaway electron beam show that if the background electron density is too high, the gas may not penetrate, suggesting a possible explanation for the recent results of Reux et al in JET (2015 Nucl. Fusion 55 093013)

Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET

Effect of ELMs on fuel retention at the bulk W target of JET ITER-Like Wall was studied with multi-scale calculations. Plasma input parameters were taken from ELMy H-mode plasma experiment. The energetic intra-ELM fuel particles get implanted and create near-surface defects up to depths of few tens of nm, which act as the main fuel trapping sites during ELMs. Clustering of implantation-induced vacancies were found to take place. The incoming flux of inter-ELM plasma particles increases the different filling levels of trapped fuel in defects. The temperature increase of the W target during the pulse increases the fuel detrapping rate. The inter-ELM fuel particle flux refills the partially emptied trapping sites and fills new sites. This leads to a competing effect on the retention and release rates of the implanted particles. At high temperatures the main retention appeared in larger vacancy clusters due to increased clustering rate

Impact of fast ions on density peaking in JET: fluid and gyrokinetic modeling

The effect of fast ions on turbulent particle transport, driven by ion temperature gradient (ITG)/ trapped electron mode turbulence, is studied. Two neutral beam injection (NBI) heated JET discharges in different regimes are analyzed at the radial position ρ$_{t}$=0.6, one of them an L-mode and the other one an H-mode discharge. Results obtained from the computationally efficient fluid model EDWM and the gyro-fluid model TGLF are compared to linear and nonlinear gyrokinetic GENE simulations as well as the experimentally obtained density peaking. In these models, the fast ions are treated as a dynamic species with a Maxwellian background distribution. The dependence of the zero particle flux density gradient (peaking factor) on fast ion density, temperature and corresponding gradients, is investigated. The simulations show that the inclusion of a fast ion species has a stabilizing influence on the ITG mode and reduces the peaking of the main ion and electron density profiles in the absence of sources. The models mostly reproduce the experimentally obtained density peaking for the L-mode discharge whereas the H-mode density peaking is significantly underpredicted, indicating the importance of the NBI particle source for the H-mode density profile

Current Research into Applications of Tomography for Fusion Diagnostics

Retrieving spatial distribution of plasma emissivity from line integrated measurements on tokamaks presents a challenging task due to ill-posedness of the tomography problem and limited number of the lines of sight. Modern methods of plasma tomography therefore implement a-priori information as well as constraints, in particular some form of penalisation of complexity. In this contribution, the current tomography methods under development (Tikhonov regularisation, Bayesian methods and neural networks) are briefly explained taking into account their potential for integration into the fusion reactor diagnostics. In particular, current development of the Minimum Fisher Regularisation method is exemplified with respect to real-time reconstruction capability, combination with spectral unfolding and other prospective tasks

The effect of beryllium oxide on retention in JET ITER-like wall tiles

Preliminary results investigating the microstructure, bonding and effect of beryllium oxide formation on retention in the JET ITER-like wall beryllium tiles, are presented. The tiles have been investigated by several techniques: Scanning Electron Microscopy (SEM) equipped with Energy Dispersive X-ray (EDX), Transmission Electron microscopy (TEM) equipped with EDX and Electron Energy Loss Spectroscopy (EELS), Raman Spectroscopy and Thermal Desorption Spectroscopy (TDS). This paper focuses on results from melted materials of the dump plate tiles in JET. From our results and the literature, it is concluded, beryllium can form micron deep oxide islands contrary to the nanometric oxides predicted under vacuum conditions. The deepest oxides analyzed were up to 2-micron thicknesses. The beryllium Deuteroxide (BeOxDy) bond was found with Raman Spectroscopy. Application of EELS confirmed the oxide presence and stoichiometry. Literature suggests these oxides form at temperatures greater than 700 °C where self-diffusion of beryllium ions through the surface oxide layer can occur. Further oxidation is made possible between oxygen plasma impurities and the beryllium ions now present at the wall surface. Under Ultra High Vacuum (UHV) nanometric Beryllium oxide layers are formed and passivate at room temperature. After continual cyclic heating (to the point of melt formation) in the presence of oxygen impurities from the plasma, oxide growth to the levels seen experimentally (approximately two microns) is proposed. This retention mechanism is not considered to contribute dramatically to overall retention in JET, due to low levels of melt formation. However, this mechanism, thought the result of operation environment and melt formation, could be of wider concern to ITER, dependent on wall temperatures