Robust Multilayer Insulation for Cryogenic Systems

New requirements for thermal insulation include robust Multilayer insulation (MU) systems that work for a range of environments from high vacuum to no vacuum. Improved MLI systems must be simple to install and maintain while meeting the life-cycle cost and thermal performance objectives. Performance of actual MLI systems has been previously shown to be much worse than ideal MLI. Spacecraft that must contain cryogens for both lunar service (high vacuum) and ground launch operations (no vacuum) are planned. Future cryogenic spacecraft for the soft vacuum environment of Mars are also envisioned. Industry products using robust MLI can benefit from improved cost-efficiency and system safety. Novel materials have been developed to operate as excellent thermal insulators at vacuum levels that are much less stringent than the absolute high vacuum requirement of current MLI systems. One such robust system, Layered Composite Insulation (LCI), has been developed by the Cryogenics Test Laboratory at NASA Kennedy Space Center. The experimental testing and development of LCI is the focus of this paper. LCI thermal performance under cryogenic conditions is shown to be six times better than MLI at soft vacuum and similar to MLI at high vacuum. The experimental apparent thermal conductivity (k-value) and heat flux data for LCI systems are compared with other MLI systems

Cryogenic Thermal Performance Testing of Bulk-Fill and Aerogel Insulation Materials

The research testing and demonstration of new bulk-fill materials for cryogenic thermal insulation systems was performed by the Cryogenics Test Laboratory at NASA Kennedy Space Center. Thermal conductivity testing under actual-use cryogenic conditions is a key to understanding the total system performance encompassing engineering, economics, and materials factors. A number of bulk fill insulation materials, including aerogel beads, glass bubbles, and perlite powder, were tested using a new cylindrical cryostat. Boundary temperatures for the liquid nitrogen boil-off method were 293 K and 78 K. Tests were performed as a function of cold vacuum pressure from high vacuum to no vacuum conditions. Results are compared with other complementary test methods in the range of 300 K to 20 K. Various testing techniques are shown to be required to obtain a complete understanding of the operating performance of a material and to provide data for answers to design engineering questions

Reported versus measured body weight and height of 4-year-old children and the prevalence of overweight

Background: In adults, body weight tends to be underestimated when based on self-reported data. Whether this discrepancy between measured and reported data exists in healthy young children is unclear. We studied whether parental reported body weight and height of 4-year-old children corresponded with measured body weight and height. In addition, we studied the determinants and the consequences of differences between reported and measured data. Methods: Data on body weight and height of 864 4-year-old Dutch children born in 1996/1997 enrolled in the Prevention and Incidence of Asthma and Mite Allergy (PIAMA) birth cohort study were collected via a questionnaire and a medical examination. Overweight was defined according to standard international age and gender specific definitions. Results: Mean differences between measured and reported body weight, height, and body mass index (BMI) were small. Parents of children with a low BMI tended to over report body weight while parents of children with a high BMI tended to underreport body weight. Whereas 9.5% of the children were overweight according to reported BMI, the prevalence of overweight was 13.4% based on measured BMI. Over 45% of the overweight children according to measured BMI were missed when reported BMI was used. Conclusion: These findings suggest that overweight prevalence rates in children are underestimated when based on reported weight and height

Unlocking the unsustainable rice-wheat system of Indian Punjab: Assessing alternatives to crop-residue burning from a systems perspective

Crop residue burning in Indian Punjab emits particulate matter with detrimental impacts on health, climate and that threaten agricultural production. Though legal and technological barriers to residue burning exist – and alternatives considered more profitable to farmers – residue burning continues. We review black carbon (BC) emissions from residue burning in Punjab, analyse social-ecological processes driving residue burning, and rice and wheat value-chains. Our aims are to a) understand system feedbacks driving agricultural practices in Punjab; b) identify systemic effects of alternatives to residue burning and c) identify companies and financial actors investing in agricultural production in Punjab. We find feedbacks locking the system into crop residue burning. The Government of India has greatest financial leverage and risk in the current system. Corporate stakeholders have little financial incentive to enact change, but sufficient stakes in the value chains to influence change. Agricultural policy changes are necessary to reduce harmful impacts of current practices, but insufficient to bringing about sustainability. Transformative changes will require crop diversification, circular business models and green financing. Intermediating financial institutions setting sustainability conditions on loans could leverage these changes. Sustainability requires the systems perspective we provide, to reconnect production with demand and with supporting environmental conditions

Methods for measuring gas emissions from naturally ventilated livestock buildings: Developments over the last decade and perspectives for improvement

[EN] The objectives of this paper are: 1) to give an overview of the development of methods for measuring emission rates from naturally ventilated livestock buildings over the last decade, 2) to identify and evaluate strengths and weaknesses, 3) to summarise and conclude the current state-of-art of available measurement concepts and their perspectives for improvement. The methods reviewed include determination of concentration and air exchange rate separately, tracer gas ratio, passive flux samplers, flux chambers, and combined downwind measurement and dispersion modelling. It is concluded that passive flux samplers, flux chambers and combined measurement and dispersion modelling are useful, but for limited fields of application only and require further development and validation against reference methods. The most robust method to investigate emission rates available at this stage is the tracer gas ratio method, but improvements are required. They include more detailed estimates of CO2 release rates (when using CO2 as a tracer) and research into optimising dosing performance of tracer gas release systems. The reliability of tracer gas ratio methods applied in buildings with large ventilation openings needs to be improved by a more profound understanding of tracer-pollutant ratios and their spatial variability, and the development of improved sampling methods for concentration ratios. There is a need for a field reference method against which other methods can be evaluated. None of the diicussed measurement methods can be marked as a solid reference for all conditions; tracer gas ratio methods are the most likely candidate but need further improvement. (C) 2012 IAgrE. Published by Elsevier Ltd. All rights reserved.The contribution to this paper of N. Ogink and J. Mosquera was financially supported by the Netherlands Ministry of Infrastructure and Environment.Ogink, NWM.; Mosquera, J.; Calvet Sanz, S.; Zhang, G. (2013). Methods for measuring gas emissions from naturally ventilated livestock buildings: Developments over the last decade and perspectives for improvement. Biosystems Engineering. 116(3):297-308. https://doi.org/10.1016/j.biosystemseng.2012.10.005S297308116

Multiplex quantitative PCR for single-reaction genetically modified (GM) plant detection and identification of false-positive GM plants linked to Cauliflower mosaic virus (CaMV) infection.

BACKGROUND:Most genetically modified (GM) plants contain a promoter, P35S, from the plant virus, Cauliflower mosaic virus (CaMV), and many have a terminator, TNOS, derived from the bacterium, Agrobacterium tumefaciens. Assays designed to detect GM plants often target the P35S and/or TNOS DNA sequences. However, because the P35S promoter is derived from CaMV, these detection assays can yield false-positives from non-GM plants infected by this naturally-occurring virus. RESULTS:Here we report the development of an assay designed to distinguish CaMV-infected plants from GM plants in a single multiplexed quantitative PCR (qPCR) reaction. Following initial testing and optimization via PCR and singleplex-to-multiplex qPCR on both plasmid and plant DNA, TaqMan qPCR probes with different fluorescence wavelengths were designed to target actin (a positive-control plant gene), P35S, P3 (a CaMV-specific gene), and TNOS. We tested the specificity of our quadruplex qPCR assay using different DNA extracts from organic watercress and both organic and GM canola, all with and without CaMV infection, and by using commercial and industrial samples. The limit of detection (LOD) of each target was determined to be 1% for actin, 0.001% for P35S, and 0.01% for both P3 and TNOS. CONCLUSIONS:This assay was able to distinguish CaMV-infected plants from GM plants in a single multiplexed qPCR reaction for all samples tested in this study, suggesting that this protocol is broadly applicable and readily transferrable to any interested parties with a qPCR platform

Unlocking the unsustainable rice-wheat system of Indian Punjab : assessing alternatives to crop-residue burning from a systems perspective

This work was funded by Formas (Project # 2018-01824), and through the generous support of the Erling-Persson Family Foundation to the Global Economic Dynamics and the Biosphere, the Royal Swedish Academy of Sciences, Sweden.Crop residue burning in Indian Punjab emits particulate matter with detrimental impacts on health, climate and that threaten agricultural production. Though legal and technological barriers to residue burning exist – and alternatives considered more profitable to farmers – residue burning continues. We review black carbon (BC) emissions from residue burning in Punjab, analyse social-ecological processes driving residue burning, and rice and wheat value-chains. Our aims are to a) understand system feedbacks driving agricultural practices in Punjab; b) identify systemic effects of alternatives to residue burning and c) identify companies and financial actors investing in agricultural production in Punjab. We find feedbacks locking the system into crop residue burning. The Government of India has greatest financial leverage and risk in the current system. Corporate stakeholders have little financial incentive to enact change, but sufficient stakes in the value chains to influence change. Agricultural policy changes are necessary to reduce harmful impacts of current practices, but insufficient to bringing about sustainability. Transformative changes will require crop diversification, circular business models and green financing. Intermediating financial institutions setting sustainability conditions on loans could leverage these changes. Sustainability requires the systems perspective we provide, to reconnect production with demand and with supporting environmental conditions.Publisher PDFPeer reviewe