Functional analysis, diversity and defense-in-depth principle applied for instrumentation and control architecture in accordance with U.S.NRC / Análise funcional, diversidade e princípio da defesa em profundidade aplicado à arquitectura de instrumentação e controlo em conformidade com o U.S.NRC

According to IAEA (2020), a large number of nuclear power plants (NPP) is completing 30 to 40 years of operation, and many of them can extend the lifetime for variable periods of operation. Besides that, new applications and methods of NPP design are in direction of adopting small modular reactors (SMR) to optimize the NPP projects in relation to cost and safety (Black et al., 2021). Other way is to apply NPP in naval plants, providing efficient manners to generate energy (Freire, 2018). All these ways can make nuclear energy a viable alternative, and consequently to contribute with low carbon power demands, and stabilize the global energy matrix helping to meet climate goals in the next decades (IAEA, 2020). One of the sensing points in NPP project nowadays is the introduction of advanced digital I&C technologies (Santos, 2021). In digital I&C design based on nuclear normative basis, it is imperative to be adherent with the safety and human factors engineering (HFE) requirements. This paper proposes the formalization of a plant-level Functional Analysis (FA) methodology with Diversity and Defense-in-Depth (D3) principles, considering the U.S.NRC normative basis

The Brazilian Developments on the Regional Atmospheric Modeling System (BRAMS 5.2): An Integrated Environmental Model Tuned for Tropical Areas

We present a new version of the Brazilian developments on the Regional Atmospheric Modeling System where different previous versions for weather, chemistry and carbon cycle were unified in a single integrated software system. The new version also has a new set of state-of-the-art physical parameterizations and greater computational parallel and memory usage efficiency. Together with the description of the main features are examples of the quality of the transport scheme for scalars, radiative fluxes on surface and model simulation of rainfall systems over South America in different spatial resolutions using a scale-aware convective parameterization. Besides, the simulation of the diurnal cycle of the convection and carbon dioxide concentration over the Amazon Basin, as well as carbon dioxide fluxes from biogenic processes over a large portion of South America are shown. Atmospheric chemistry examples present model performance in simulating near-surface carbon monoxide and ozone in Amazon Basin and Rio de Janeiro megacity. For tracer transport and dispersion, it is demonstrated the model capabilities to simulate the volcanic ash 3-d redistribution associated with the eruption of a Chilean volcano. Then, the gain of computational efficiency is described with some details. BRAMS has been applied for research and operational forecasting mainly in South America. Model results from the operational weather forecast of BRAMS on 5 km grid spacing in the Center for Weather Forecasting and Climate Studies, INPE/Brazil, since 2013 are used to quantify the model skill of near surface variables and rainfall. The scores show the reliability of BRAMS for the tropical and subtropical areas of South America. Requirements for keeping this modeling system competitive regarding on its functionalities and skills are discussed. At last, we highlight the relevant contribution of this work on the building up of a South American community of model developers

The Brazilian developments on the Regional Atmospheric Modeling System (BRAMS 5.2): an integrated environmental model tuned for tropical areas

We present a new version of the Brazilian developments on the Regional Atmospheric Modeling System (BRAMS), in which different previous versions for weather, chemistry, and carbon cycle were unified in a single integrated modeling system software. This new version also has a new set of state-of-the-art physical parameterizations and greater computational parallel and memory usage efficiency. The description of the main model features includes several examples illustrating the quality of the transport scheme for scalars, radiative fluxes on surface, and model simulation of rainfall systems over South America at different spatial resolutions using a scale aware convective parameterization. Additionally, the simulation of the diurnal cycle of the convection and carbon dioxide concentration over the Amazon Basin, as well as carbon dioxide fluxes from biogenic processes over a large portion of South America, are shown. Atmospheric chemistry examples show the model performance in simulating near-surface carbon monoxide and ozone in the Amazon Basin and the megacity of Rio de Janeiro. For tracer transport and dispersion, the model capabilities to simulate the volcanic ash 3-D redistribution associated with the eruption of a Chilean volcano are demonstrated. The gain of computational efficiency is described in some detail. BRAMS has been applied for research and operational forecasting mainly in South America. Model results from the operational weather forecast of BRAMS on 5 km grid spacing in the Center for Weather Forecasting and Climate Studies, INPE/Brazil, since 2013 are used to quantify the model skill of near-surface variables and rainfall. The scores show the reliability of BRAMS for the tropical and subtropical areas of South America. Requirements for keeping this modeling system competitive regarding both its functionalities and skills are discussed. Finally, we highlight the relevant contribution of this work to building a South American community of model developers.CNPqFAPESPEarth System Research Laboratory at the National Oceanic and Atmospheric Administration (ESRL/NOAA), Boulder, USAInst Nacl Pesquisas Espaciais, Ctr Previsao Tempo & Estudos Climat, Cachoeira Paulista, SP, BrazilDiv Ciência da Computação, Instituto Tecnológico de Aeronáutica, São José dos Campos, SP, BrazilUniv Estadual Paulista Unesp, Fac Ciencias, Bauru, SP, BrazilCtr Meteorol Bauru IPMet, Bauru, SP, BrazilUniv Fed Sao Paulo, Dept Ciencias Ambientais, Diadema, SP, BrazilUniv Sao Paulo, Inst Astron Geofis & Ciencias Atmosfer, Sao Paulo, SP, BrazilUniv Fed Campina Grande, Dept Ciencias Atmosfer, Campina Grande, PB, BrazilEmbrapa Informat Agr, Campinas, SP, BrazilUniv Fed Sao Paulo, Inst Ciencia & Tecnol, Sao Jose Dos Campos, SP, BrazilUniv Fed Rio Grande do Norte, Dept Ciencias Atmosfer & Climat, Programa Pos Grad Ciencias Climat, Natal, RN, BrazilInst Nacl Pesquisas Espaciais, Ctr Ciencias Sistema, Sao Jose Dos Campos, SP, BrazilUniv Fed Sao Joao Del Rei, Dept Geociencias, Sao Joao Del Rei, MG, BrazilInst Nacl Pesquisas Espaciais, Lab Associado Computacao & Matemat Aplica, Sao Jose Dos Campos, BrazilUniv Evora, Inst Ciencias Agr & Ambientais Mediterr, Evora, PortugalUniv Lusofona Humanidades & Tecnol, Ctr Interdisciplinar Desenvolvimento Ambient Gest, Lisbon, PortugalUniv Fed Pelotas, Fac Meteorol, Pelotas, RS, BrazilUnive Tecnol Fed Parana, Londrina, PR, BrazilNASA, Goddard Space Flight Ctr, Univ Space Res Assoc, Goddard Earth Sci Technol & Res Global Modeling &, Greenbelt, MD USAUniv Fed Sao Paulo, Inst Ciencia & Tecnol, Sao Jose Dos Campos, SP, BrazilUniv Fed Sao Paulo, Inst Ciencia & Tecnol, Sao Jose Dos Campos, SP, BrazilCNPq: 306340/2011-9FAPESP: 2014/01563-1FAPESP: 2015/10206-0FAPESP: 2014/01564-8Web of Scienc

Múltiplas fraturas de casco em tigre d’água (Trachemys dorbigni): Relato de caso

Trachemys dorbigni, conhecido popularmente como tigre d’água brasileiro, é distribuído principalmente no Uruguai, no nordeste da Argentina e no sul do Brasil, com maior incidência no Rio Grande do Sul e Santa Catarina. Todavia, pode ser encontrada em outras regiões do país devido à liberação dessa espécie como animal de estimação. O objetivo do trabalho foi relatar um caso de redução de fratura em tigre d’água com múltiplos fragmentos em decorrência de trauma por atropelamento no município de Patrocínio, MG. Foi atendido um tigre d’água. O animal pesava 224 gramas, tinha dois anos de idade e havia sido vítima de atropelamento. Constatou-se múltiplas fraturas na região dorsal e ventral do casco com abertura de cavidade celomática e exposição de órgãos. Foi solicitado exame radiográfico do casco do animal e o animal permaneceu internado até a realização da redução de fratura. Após a estabilização inicial do paciente, foi realizada administração de antibióticos. A redução das fraturas da carapaça foi realizada pela implantação de placas e parafusos, onde foi realizada perfuração do casco, utilizando uma furadeira ortopédica. Os fragmentos foram aproximados e a impermeabilização foi feita com resina epóxi. O primeiro atendimento ao tigre d’água, bem como a instauração de terapia para estabilização do paciente foram de fundamental importância para o sucesso do tratamento das fraturas na carapaça do animal. Além disso, o procedimento de redução das fraturas atingiu o resultado desejado, com consolidação da fratura e retorno do animal à sua rotina

Effect of High vs Low Doses of Chloroquine Diphosphate as Adjunctive Therapy for Patients Hospitalized With Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) Infection: A Randomized Clinical Trial.

There is no specific antiviral therapy recommended for coronavirus disease 2019 (COVID-19). In vitro studies indicate that the antiviral effect of chloroquine diphosphate (CQ) requires a high concentration of the drug.To evaluate the safety and efficacy of 2 CQ dosages in patients with severe COVID-19. This parallel, double-masked, randomized, phase IIb clinical trial with 81 adult patients who were hospitalized with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection was conducted from March 23 to April 5, 2020, at a tertiary care facility in Manaus, Brazilian Amazon. - Patients were allocated to receive high-dosage CQ (ie, 600 mg CQ twice daily for 10 days) or low-dosage CQ (ie, 450 mg twice daily on day 1 and once daily for 4 days). - Label: Main Outcomes and Measures Primary outcome was reduction in lethality by at least 50% in the high-dosage group compared with the low-dosage group. Data presented here refer primarily to safety and lethality outcomes during treatment on day 13. Secondary end points included participant clinical status, laboratory examinations, and electrocardiogram results. Outcomes will be presented to day 28. Viral respiratory secretion RNA detection was performed on days 0 and 4. Out of a predefined sample size of 440 patients, 81 were enrolled (41 [50.6%] to high-dosage group and 40 [49.4%] to low-dosage group). Enrolled patients had a mean (SD) age of 51.1 (13.9) years, and most (60 [75.3%]) were men. Older age (mean [SD] age, 54.7 [13.7] years vs 47.4 [13.3] years) and more heart disease (5 of 28 [17.9%] vs 0) were seen in the high-dose group. Viral RNA was detected in 31 of 40 (77.5%) and 31 of 41 (75.6%) patients in the low-dosage and high-dosage groups, respectively. Lethality until day 13 was 39.0% in the high-dosage group (16 of 41) and 15.0% in the low-dosage group (6 of 40). The high-dosage group presented more instance of QTc interval greater than 500 milliseconds (7 of 37 [18.9%]) compared with the low-dosage group (4 of 36 [11.1%]). Respiratory secretion at day 4 was negative in only 6 of 27 patients (22.2%). - Label: Conclusions and Relevance The preliminary findings of this study suggest that the higher CQ dosage should not be recommended for critically ill patients with COVID-19 because of its potential safety hazards, especially when taken concurrently with azithromycin and oseltamivir. These findings cannot be extrapolated to patients with nonsevere COVID-19