Quantum Communication and Computing With Atomic Ensembles Using Light-Shift Imbalance Induced Blockade

Recently, we have shown that for conditions under which the so-called light-shift imbalance induced blockade (LSIIB) occurs, the collective excitation of an ensemble of a multi-level atom can be treated as a closed two level system. In this paper, we describe how such a system can be used as a quantum bit (qubit) for quantum communication and quantum computing. Specifically, we show how to realize a C-NOT gate using the collective qubit and an easily accessible ring cavity, via an extension of the so-called Pellizzari scheme. We also describe how multiple, small-scale quantum computers realized using these qubits can be linked effectively for implementing a quantum internet. We describe the details of the energy levels and transitions in 87Rb atom that could be used for implementing these schemes.Comment: 16 pages, 9 figures. Accepted in Phys. Rev.

The Effect of Fiber Sizes on Mechanical Properties of Millet Husk (Pennisetum glaucum) Fiber Filled High Density Polyethylene Composites

This study examined the effect of fiber sizes on the mechanical properties of millet husk powder (MHP) filled high density polyethylene (HDPE) thermoplastic composites. The MHP-HDPE composites were prepared by melt blending techniques, accompanied by compression molding process. Three different fiber sizes; 250µm, 500µm and 750µm were pulverized and the fiber loading was 10%, 20% 30% and 40% by weight. Tensile and impact properties were tested using universal testing machine (UTM). 1The results show that ensile strength increased at certain loadings while tensile modulus increased by increasing the millet fiber loading. While the impact strength decreases substantially with increase fiber loading the tensile strain considerably decreased at millet husk fiber application above 10%. Therefore, it was observed that composites with least size fiber indicated improvement with increasing strength as well as relative extension

Temperature profile of produced gas in oil palm biomass fluidized bed gasifier: effect of fibre/shell composition ratio

Malaysia is known to be one of the largest palm oil producers and also generates huge amounts of oil palm biomass, which is mainly treated as bio waste. One of the efficient methods to recycle this potential oil palm biomass could be gasification technology. Gasification is a process involving conversion of solid carbonaceous fuel into combustible gas using directly heated biomass. From processing of Fresh Fruit Bunch (FFB) (a biomass example), Empty Fruit Bunch (EFB) fibre, shell etc. are produced. In this study, a laboratory scale fluidized bed was developed, an appropriate fibre/shell composition ratio was studied and analysis on profiles of gas produced in the oil palm biomass fluidized bed gasifier was conducted. The effects of fibre/shell composition ratio and rate of reaction on temperature profiles were investigated. Temperature reaction rate and calorific value of oil palm biomass with gas compositions were also analyzed

Simulation and analysis for harvesting Dioscorea hispida tubers

This study discussed an analysis and simulation of fixture stand structure that will use for data collection of force required for harvesting the tubers of Dioscorea hispida. The tubers were surrounded by roots which were well gripped to the soil which made harvesting process difficult. Therefore, a new tool fixture equipped with digital force gauge device to gripped stem dioscorea hispida is required. Imada digital force measurement gauges are state-of-the-art, instruments capable of the highly accurate measurements required in quality testing to determine the strength or functionality of a part or product. The information from the experiments is used to model and simulate the tool in Computer Aided Design (CAD) environment. The solid modelling software Solidworks was used for the design, modelling and simulation of the equipment and the finite element analysis to determine the stress affected on various fixture designs

Flammability, morphological and mechanical properties of sugar palm fiber/polyester yarn-reinforced epoxy hybrid biocomposites with magnesium hydroxide flame retardant filler

This paper aims to study the surface morphology, flammability and tensile properties of sugar palm fiber (SPF) hybrid with polyester (PET) yarn-reinforced epoxy composite with the addition of magnesium hydroxide (Mg(OH)2) as a flame retardant. The composites were prepared by hybridized epoxy and Mg(OH)2/PET with different amounts of SPF contents (0%, 20%, 35% and 50%) using the cold press method. Then these composites were tested by horizontal burning analysis, tensile strength testing and scanning electron microscopy (SEM) analysis. The specimen with 35% SPF (Epoxy/PET/SPF-35) with the incorporation of Mg(OH)2 as a flame retardant showed the lowest burning rate of 13.25 mm/min. The flame took a longer time to propagate along with the Epoxy/PET/SPF-35 specimen and at the same time producing char. Epoxy/PET/SPF-35 also had the highest tensile strength of 9.69 MPa. Tensile properties of the SPF hybrid with PET yarn (SPF/PET)-reinforced epoxy composite was decreased at 50% SPF content due to the lack of interfacial bonding between the fibers and matrix. Surface morphology analysis through SEM showed uniform distribution of the SPF and matrix with less adhesion, which increased the flammability and reduced the tensile properties of the hybrid polymeric composites. These composites have potential to be utilized in various applications, such as automotive components, building materials and in the aerospace industry

Evanescent light-matter Interactions in Atomic Cladding Wave Guides

Alkali vapors, and in particular rubidium, are being used extensively in several important fields of research such as slow and stored light non-linear optics3 and quantum computation. Additionally, the technology of alkali vapors plays a major role in realizing myriad industrial applications including for example atomic clocks magentometers8 and optical frequency stabilization. Lately, there is a growing effort towards miniaturizing traditional centimeter-size alkali vapor cells. Owing to the significant reduction in device dimensions, light matter interactions are greatly enhanced, enabling new functionalities due to the low power threshold needed for non-linear interactions. Here, taking advantage of the mature Complimentary Metal-Oxide-Semiconductor (CMOS) compatible platform of silicon photonics, we construct an efficient and flexible platform for tailored light vapor interactions on a chip. Specifically, we demonstrate light matter interactions in an atomic cladding wave guide (ACWG), consisting of CMOS compatible silicon nitride nano wave-guide core with a Rubidium (Rb) vapor cladding. We observe the highly efficient interaction of the electromagnetic guided mode with the thermal Rb cladding. The nature of such interactions is explained by a model which predicts the transmission spectrum of the system taking into account Doppler and transit time broadening. We show, that due to the high confinement of the optical mode (with a mode area of 0.3{\lambda}2), the Rb absorption saturates at powers in the nW regime.Comment: 10 Pages 4 Figures. 1 Supplementar

Implications For The Origin Of GRB 051103 From LIGO Observations

We present the results of a LIGO search for gravitational waves (GWs) associated with GRB 051103, a short-duration hard-spectrum gamma-ray burst (GRB) whose electromagnetically determined sky position is coincident with the spiral galaxy M81, which is 3.6 Mpc from Earth. Possible progenitors for short-hard GRBs include compact object mergers and soft gamma repeater (SGR) giant flares. A merger progenitor would produce a characteristic GW signal that should be detectable at the distance of M81, while GW emission from an SGR is not expected to be detectable at that distance. We found no evidence of a GW signal associated with GRB 051103. Assuming weakly beamed gamma-ray emission with a jet semi-angle of 30 deg we exclude a binary neutron star merger in M81 as the progenitor with a confidence of 98%. Neutron star-black hole mergers are excluded with > 99% confidence. If the event occurred in M81 our findings support the the hypothesis that GRB 051103 was due to an SGR giant flare, making it the most distant extragalactic magnetar observed to date.Comment: 8 pages, 3 figures. For a repository of data used in the publication, go to: https://dcc.ligo.org/cgi-bin/DocDB/ShowDocument?docid=15166 . Also see the announcement for this paper on ligo.org at: http://www.ligo.org/science/Publication-GRB051103/index.ph

Search for Gravitational Wave Bursts from Six Magnetars

Soft gamma repeaters (SGRs) and anomalous X-ray pulsars (AXPs) are thought to be magnetars: neutron stars powered by extreme magnetic fields. These rare objects are characterized by repeated and sometimes spectacular gamma-ray bursts. The burst mechanism might involve crustal fractures and excitation of non-radial modes which would emit gravitational waves (GWs). We present the results of a search for GW bursts from six galactic magnetars that is sensitive to neutron star f-modes, thought to be the most efficient GW emitting oscillatory modes in compact stars. One of them, SGR 0501+4516, is likely similar to 1 kpc from Earth, an order of magnitude closer than magnetars targeted in previous GW searches. A second, AXP 1E 1547.0-5408, gave a burst with an estimated isotropic energy >10(44) erg which is comparable to the giant flares. We find no evidence of GWs associated with a sample of 1279 electromagnetic triggers from six magnetars occurring between 2006 November and 2009 June, in GW data from the LIGO, Virgo, and GEO600 detectors. Our lowest model-dependent GW emission energy upper limits for band-and time-limited white noise bursts in the detector sensitive band, and for f-mode ringdowns (at 1090 Hz), are 3.0 x 10(44)d(1)(2) erg and 1.4 x 10(47)d(1)(2) erg, respectively, where d(1) = d(0501)/1 kpc and d(0501) is the distance to SGR 0501+4516. These limits on GW emission from f-modes are an order of magnitude lower than any previous, and approach the range of electromagnetic energies seen in SGR giant flares for the first time.United States National Science FoundationScience and Technology Facilities Council of the United KingdomMax-Planck-SocietyState of Niedersachsen/GermanyItalian Istituto Nazionale di Fisica NucleareFrench Centre National de la Recherche ScientifiqueAustralian Research CouncilCouncil of Scientific and Industrial Research of IndiaIstituto Nazionale di Fisica Nucleare of ItalySpanish Ministerio de Educacion y CienciaConselleria d'Economia Hisenda i Innovacio of the Govern de les Illes BalearsFoundation for Fundamental Research on Matter supported by the Netherlands Organisation for Scientific ResearchPolish Ministry of Science and Higher EducationFoundation for Polish ScienceRoyal SocietyScottish Funding CouncilScottish Universities Physics AllianceNational Aeronautics and Space Administration NNH07ZDA001-GLASTCarnegie TrustLeverhulme TrustDavid and Lucile Packard FoundationResearch CorporationAlfred P. Sloan FoundationRussian Space AgencyRFBR 09-02-00166aIPN JPL Y503559 (Odyssey), NASA NNG06GH00G, NASA NNX07AM42G, NASA NNX08AC89G (INTEGRAL), NASA NNG06GI896, NASA NNX07AJ65G, NASA NNX08AN23G (Swift), NASA NNX07AR71G (MESSENGER), NASA NNX06AI36G, NASA NNX08AB84G, NASA NNX08AZ85G (Suzaku), NASA NNX09AU03G (Fermi)Astronom

On the effects of geometrical shapes in failure modes in natural – conventional fiber reinforced composite tube: a review

Background: Natural and synthetic fibers are known for their low density, easier fabrication than metallic in several engineering applications. Furthermore, their structural rigidity is high and they can be used for advanced applications, such as aerospace applications and automotive industry sector. Methods: Owing to this in depth, studies had been conducted to evaluate its failure modes and process of fabrication for axial and lateral crushing behaviour to replace metallic materials. In this review paper, failure modes and geometrical designs such as shapes, triggering and geometry have been examined, where these factors are affected on crashworthiness parameters. The main aim of this review article is the reported work done in crushing behavior and failure modes of natural, synthetic and manufacturing technique process parameters on fibers reinforced composite tubes. Results: The results showed that the failure modes and crushing behavior in composite tubes depend on the type of material reinforced composite tubes and structure. Conclusion: The failure modes and crushing behavior in composite tubes depend on the type of material reinforced composite tubes and structure

Mechanical properties of longitudinal basalt/woven-glass-fiber-reinforced unsaturated polyester-resin hybrid composites

This work represents a study to investigate the mechanical properties of longitudinal basalt/woven-glass-fiber-reinforced unsaturated polyester-resin hybrid composites. The hybridization of basalt and glass fiber enhanced the mechanical properties of hybrid composites. The unsaturated polyester resin (UP), basalt (B) and glass fibers (GF) were fabricated using the hand lay-up method in six formulations (UP, GF, B7.5/G22.5, B15/G15, B22.5/G7.5 and B) to produce the composites, respectively. This study showed that the addition of basalt to glass-fiber-reinforced unsaturated polyester resin increased its density, tensile and flexural properties. The tensile strength of the B22.5/G7.5 hybrid composites increased by 213.92 MPa compared to neat UP, which was 8.14 MPa. Scanning electron microscopy analysis was used to observe the fracture mode and fiber pullout of the hybrid composites