Synthesis and Properties of Inulin Based Microgels

AbstractCross-linked inulin (X-inulin) microparticles were synthesized in reverse micelles using water-in-oil microemulsion polymerization. Linear inulin was crosslinked with divinyl sulfone (DVS) in a sodium bis(2-ethylhexyl) sulfosuccinate (AOT) inverse microemulsion under basic conditions. These particles were demonstrated to be excellent scaffolds for the in situ synthesis of CdS quantum dots (Q-dots). The inulin-based particles were shown to be non-cytotoxic in fibroblast cell culture, and degradable under acidic and basic conditions. Furthermore, gallic acid and caffeine were used as model drugs for loading and release studies from these particles, illustrating their potential as drug carriers with controlled release

Subtle local structural variations in oxygen deficient niobium germanate thin film glasses as revealed by x-ray absorption spectroscopy

6 págs.; 4 figs.; 2 tabs. 16th International Conference on X-ray Absorption Fine Structure (XAFS16) ; Open Access funded by Creative Commons Atribution Licence 3.0The local electronic and crystal structure of niobium-lead-germanate, Nb2O5-PbO- GeO2 (NPG), glass thin films on silicon substrates were probed by XANES and EXAFS. NPG glasses are promising candidates for applications in nonlinear optical devices because they exhibit interesting optical characteristics such as high nonlinear third order optical susceptibility. In this work NPG glasses were prepared with pulsed laser deposition method with varying oxygen partial pressure to induce thin films with different oxygen stoichiometry. Previously, it was shown that oxygen stoichiometry has a very important effect to produce unusual high optical susceptibility. Detailed EXAFS and XANES analyses in a series of NPG thin films revealed the subtle variations in the local environment around Nb atoms and the Nb oxidation states caused by oxygen deficiencies. Published under licence by IOP Publishing LtdPeer Reviewe

Computerized characterization of breast masses on threeâ dimensional ultrasound volumes

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/134860/1/mp9531.pd

Deep learning in medical imaging and radiation therapy

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/146980/1/mp13264_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/146980/2/mp13264.pd

Longitudinal assessment of demographic representativeness in the Medical Imaging and Data Resource Center open data commons

Purpose: The Medical Imaging and Data Resource Center (MIDRC) open data commons was launched to accelerate the development of artificial intelligence (AI) algorithms to help address the COVID-19 pandemic. The purpose of this study was to quantify longitudinal representativeness of the demographic characteristics of the primary MIDRC dataset compared to the United States general population (US Census) and COVID-19 positive case counts from the Centers for Disease Control and Prevention (CDC). Approach: The Jensen-Shannon distance (JSD), a measure of similarity of two distributions, was used to longitudinally measure the representativeness of the distribution of (1) all unique patients in the MIDRC data to the 2020 US Census and (2) all unique COVID-19 positive patients in the MIDRC data to the case counts reported by the CDC. The distributions were evaluated in the demographic categories of age at index, sex, race, ethnicity, and the combination of race and ethnicity. Results: Representativeness of the MIDRC data by ethnicity and the combination of race and ethnicity was impacted by the percentage of CDC case counts for which this was not reported. The distributions by sex and race have retained their level of representativeness over time. Conclusion: The representativeness of the open medical imaging datasets in the curated public data commons at MIDRC has evolved over time as the number of contributing institutions and overall number of subjects have grown. The use of metrics, such as the JSD support measurement of representativeness, is one step needed for fair and generalizable AI algorithm development.</p

Effects of magnification and zooming on depth perception in digital stereomammography: an observer performance study

We are evaluating the application of stereoscopic imaging to digital mammography. In the current study, we investigated the effects of magnification and zooming on depth perception. A modular phantom was designed which contained six layers of 1-mm-thick Lexan plates, each spaced 1 mm apart. Eight to nine small, thin nylon fibrils were pasted on each plate in horizontal or vertical orientations such that they formed 25 crossing fibril pairs in a projected image. The depth separation between each fibril pair ranged from 2 to 10 mm. A change in the order of the Lexan plates changed the depth separation of the two fibrils in a pair. Stereoscopic image pairs of the phantom were acquired with a GE full-field digital mammography system. Three different phantom configurations were imaged. All images were obtained using a Rh target/Rh filter spectrum at 30 kVp tube potential and a ±3° stereo shift angle. Images were acquired in both contact and 1.8X magnification geometry and an exposure range of 4 to 63 mAs was employed. The images were displayed on a Barco monitor driven by a Metheus stereo graphics board and viewed with LCD stereo glasses. Five observers participated in the study. Each observer visually judged whether the vertical fibril was in front of or behind the horizontal fibril in each fibril pair. It was found that the accuracy of depth discrimination increased with increasing fibril depth separation and x-ray exposure. The accuracy was not improved by electronic display zooming of the contact stereo images by 2X. Under conditions of high noise (low mAs) and small depth separation between the fibrils, the observers' depth discrimination ability was significantly better in stereo images acquired with geometric magnification than in images acquired with a contact technique and displayed with or without zooming. Under our experimental conditions, a 2 mm depth discrimination was achieved with over 60% accuracy on contact images with and without zooming, and with over 90% accuracy on magnification images. This study indicates that stereoscopic imaging, especially with magnification, may be useful for visualizing the spatial distribution of microcalcifications in a cluster and for differentiating overlapping tissues from masses on mammograms.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/48976/2/pmb3_22_007.pd

Computer-aided detection system for clustered microcalcifications: comparison of performance on full-field digital mammograms and digitized screen-film mammograms

We have developed a computer-aided detection (CAD) system to detect clustered microcalcifications automatically on full-field digital mammograms (FFDMs) and a CAD system for screen-film mammograms (SFMs). The two systems used the same computer vision algorithms but their false positive (FP) classifiers were trained separately with sample images of each modality. In this study, we compared the performance of the CAD systems for detection of clustered microcalcifications on pairs of FFDM and SFM obtained from the same patient. For case-based performance evaluation, the FFDM CAD system achieved detection sensitivities of 70%, 80% and 90% at an average FP cluster rate of 0.07, 0.16 and 0.63 per image, compared with an average FP cluster rate of 0.15, 0.38 and 2.02 per image for the SFM CAD system. The difference was statistically significant with the alternative free-response receiver operating characteristic (AFROC) analysis. When evaluated on data sets negative for microcalcification clusters, the average FP cluster rates of the FFDM CAD system were 0.04, 0.11 and 0.33 per image at detection sensitivity level of 70%, 80% and 90% compared with an average FP cluster rate of 0.08, 0.14 and 0.50 per image for the SFM CAD system. When evaluated for malignant cases only, the difference of the performance of the two CAD systems was not statistically significant with AFROC analysis.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/58099/2/pmb7_4_008.pd

COVID-19 pandemic and allergen immunotherapy—an EAACI survey

Background: As in many fields of medical care, the coronavirus disease 2019 (COVID-19) resulted in an increased uncertainty regarding the safety of allergen immunotherapy (AIT). Therefore, the European Academy of Allergy and Clinical Immunology (EAACI) aimed to analyze the situation in different countries and to systematically collect all information available regarding tolerability and possible amendments in daily practice of sublingual AIT (SLIT), subcutaneous AIT (SCIT) for inhalant allergies and venom AIT. Methods: Under the framework of the EAACI, a panel of experts in the field of AIT coordinated by the Immunotherapy Interest Group set-up a web-based retrospective survey (SurveyMonkey®) including 27 standardized questions on practical and safety aspects on AIT in worldwide clinical routine. Results: 417 respondents providing AIT to their patients in daily routine answered the survey. For patients (without any current symptoms to suspect COVID-19), 60% of the respondents informed of not having initiated SCIT (40% venom AIT, 35% SLIT) whereas for the maintenance phase of AIT, SCIT was performed by 75% of the respondents (74% venom AIT, 89% SLIT). No tolerability concern arises from this preliminary analysis. 16 physicians reported having performed AIT despite (early) symptoms of COVID-19 and/or a positive test result for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Conclusions: This first international retrospective survey in atopic diseases investigated practical aspects and tolerability of AIT during the COVID-19 pandemic and gave no concerns regarding reduced tolerability under real-life circumstances. However, the data indicate an undertreatment of AIT, which may be temporary, but could have a long-lasting negative impact on the clinical care of allergic patients