Recent development in the design, testing and impact-damage tolerance of stiffened composite panels

Structural technology of laminated filamentary-composite stiffened-panel structures under combined inplane and lateral loadings is discussed. Attention is focused on: (1) methods for analyzing the behavior of these structures under load and for determining appropriate structural proportions for weight-efficient configurations; and (2) effects of impact damage and geometric imperfections on structural performance. Recent improvements in buckling analysis involving combined inplane compression and shear loadings and transverse shear deformations are presented. A computer code is described for proportioning or sizing laminate layers and cross-sectional dimensions, and the code is used to develop structural efficiency data for a variety of configurations, loading conditions, and constraint conditions. Experimental data on buckling of panels under inplane compression is presented. Mechanisms of impact damage initiation and propagation are described

Characterizing the structure of small-world networks

We give exact relations which are valid for small-world networks (SWN's) with a general `degree distribution', i.e the distribution of nearest-neighbor connections. For the original SWN model, we illustrate how these exact relations can be used to obtain approximations for the corresponding basic probability distribution. In the limit of large system sizes and small disorder, we use numerical studies to obtain a functional fit for this distribution. Finally, we obtain the scaling properties for the mean-square displacement of a random walker, which are determined by the scaling behavior of the underlying SWN

Wittgensteinian Anti-Scepticism and Epistemic Vertigo

status: publishe

Biomass burning and anthropogenic sources of CO over New England in the summer 2004

During the summer of 2004 large wildfires were burning in Alaska and Canada, and part of the emissions were transported toward the northeast United States, where they were measured during the NEAQS-ITCT 2k4 (New England Air Quality Study-Intercontinental Transport and Chemical Transformation) study on board the NOAA WP-3 aircraft and the NOAA research vessel Ronald H. Brown. Using acetonitrile and chloroform as tracers the biomass burning and the anthropogenic fraction of the carbon monoxide (CO) enhancement are determined. As much as 30% of the measured enhancement is attributed to the forest fires in Alaska and Canada transported into the region, and 70% is attributed to the urban emissions of mainly New York and Boston. On some days the forest fire emissions were mixed down to the surface and dominated the CO enhancement. The results compare well with the FLEXPART transport model, indicating that the total emissions during the measurement campaign for biomass burning might be about 22 Tg. The total U.S. anthropogenic CO sources used in FLEXPART are 25 Tg. FLEXPART model, using the U.S. EPA NEI-99 data, overpredicts the CO mixing ratio around Boston and New York in 2004 by about 50%. Copyright 2006 by the American Geophysical Union

Nature of the Low Field Transition in the Mixed State of High Temperature Superconductors

We have numerically studied the statics and dynamics of a model three-dimensional vortex lattice at low magnetic fields. For the statics we use a frustrated 3D XY model on a stacked triangular lattice. We model the dynamics as a coupled network of overdamped resistively-shunted Josephson junctions with Langevin noise. At low fields, there is a weakly first-order phase transition, at which the vortex lattice melts into a line liquid. Phase coherence parallel to the field persists until a sharp crossover, conceivably a phase transition, near $T_{\ell} > T_m$ which develops at the same temperature as an infinite vortex tangle. The calculated flux flow resistivity in various geometries near $T=T_{\ell}$ closely resembles experiment. The local density of field induced vortices increases sharply near $T_\ell$, corresponding to the experimentally observed magnetization jump. We discuss the nature of a possible transition or crossover at $T_\ell$(B) which is distinct from flux lattice melting.Comment: Updated references. 46 pages including low quality 25 eps figures. Contact [email protected] or visit http://www.physics.ohio-state.edu:80/~ryu/ for better figures and additional movie files from simulations. To be published in Physical Review B1 01Jun9

Priority sites for wildfowl conservation in Mexico

A set of priority sites for wildfowl conservation in Mexico was determined using contemporary count data (1991–2000) from the U.S. Fish & Wildlife Service mid-winter surveys. We used a complementarity approach implemented through linear integer programming that addresses particular conservation concerns for every species included in the analysis and large fluctuations in numbers through time. A set of 31 priority sites was identified, which held more than 69% of the mid-winter count total in Mexico during all surveyed years. Six sites were in the northern highlands, 12 in the central highlands, six on the Gulf of Mexico coast and seven on the upper Pacific coast. Twenty-two sites from the priority set have previously been identified as qualifying for designation as wetlands of international importance under the Ramsar Convention and 20 sites are classified as Important Areas for Bird Conservation in Mexico. The information presented here provides an accountable, spatially-explicit, numerical basis for ongoing conservation planning efforts in Mexico, which can be used to improve existing wildfowl conservation networks in the country and can also be useful for conservation planning exercises elsewhere

Arsenic contaminated groundwater and its treatment options in Bangladesh

Arsenic (As) causes health concerns due to its significant toxicity and worldwide presence in drinking water and groundwater. The major sources of As pollution may be natural process such as dissolution of As-containing minerals and anthropogenic activities such as percolation of water from mines, etc. The maximum contaminant level for total As in potable water has been established as 10 µg/L. Among the countries facing As contamination problems, Bangladesh is the most affected. Up to 77 million people in Bangladesh have been exposed to toxic levels of arsenic from drinking water. Therefore, it has become an urgent need to provide As-free drinking water in rural households throughout Bangladesh. This paper provides a comprehensive overview on the recent data on arsenic contamination status, its sources and reasons of mobilization and the exposure pathways in Bangladesh. Very little literature has focused on the removal of As from groundwaters in developing countries and thus this paper aims to review the As removal technologies and be a useful resource for researchers or policy makers to help identify and investigate useful treatment options. While a number of technological developments in arsenic removal have taken place, we must consider variations in sources and quality characteristics of As polluted water and differences in the socio-economic and literacy conditions of people, and then aim at improving effectiveness in arsenic removal, reducing the cost of the system, making the technology user friendly, overcoming maintenance problems and resolving sludge management issues

On micro-structural effects in dielectric mixtures

The paper presents numerical simulations performed on dielectric properties of two-dimensional binary composites on eleven regular space filling tessellations. First, significant contributions of different parameters, which play an important role in the electrical properties of the composite, are introduced both for designing and analyzing material mixtures. Later, influence of structural differences and intrinsic electrical properties of constituents on the composite's over all electrical properties are investigated. The structural differences are resolved by the spectral density representation approach. The numerical technique, without any {\em a-priori} assumptions, for extracting the spectral density function is also presented.Comment: 24 pages, 8 figure and 7 tables. It is submitted to IEEE Transactions on Dielectrics and Electrical Insulatio