Characterization and mapping of surface physical properties of Mars from CRISM multi-angular data: application to Gusev Crater and Meridiani Planum

The analysis of the surface texture from the particle (grain size, shape and internal structure) to its organization (surface roughness) provides information on the geological processes. CRISM multi-angular observations (varied emission angles) allow to characterize the surface scattering behavior which depends on the composition but also the material physical properties (e.g., grain size, shape, internal structure, the surface roughness). After an atmospheric correction by the Multi-angle Approach for Retrieval of the Surface Reflectance from CRISM Observations, the surface reflectances at different geometries are analyzed by inverting the Hapke photometric model depending on the single scattering albedo, the 2-term phase function, the macroscopic roughness and the 2-term opposition effects. Surface photometric maps are created to observe the spatial variations of surface scattering properties as a function of geological units at the CRISM spatial resolution (200m/pixel). An application at the Mars Exploration Rover (MER) landing sites located at Gusev Crater and Meridiani Planum where orbital and in situ observations are available, is presented. Complementary orbital observations (e.g. CRISM spectra, THermal EMission Imaging System, High Resolution Imaging Science Experiment images) are used for interpreting the estimated Hapke photometric parameters in terms of physical properties. The in situ observations are used as ground truth to validate the interpretations. Varied scattering properties are observed inside a CRISM observation (5x10km) suggesting that the surfaces are controlled by local geological processes (e.g. volcanic resurfacing, aeolian and impact processes) rather than regional or global. Consistent results with the in situ observations are observed thus validating the approach and the use of photometry for the characterization of Martian surface physical properties

Towards a spatial decision support system for animal traceability.

This section presents the contributions of our work to the problems of bovine traceability and contact between animals using trajectory database concepts. This section describes how to delimitate problems and how to represent animal movements as trajectories. Afterwards, the algorithms for the identification of contacts between animals are presented for the calculation of contamination probabilities. In this work we define contamination algorithms for foot-and-mouth disease (FMD). FMD is a highly contagious disease that attacks all cleft-hoofed animals, mainly bovines. It occurs at all ages, regardless of sex, breed, climate, etc. The virus spreads by direct contact of animals as well as through the air, water and food.Contrato nº 43134

Uso de trajetórias na rastreabilidade bovina.

O Brasil é um dos maiores produtores e exportadores de carne bovina do mundo em um mercado extremamente competitivo. As exigências sobre o controle da origem e produção de animais aumentam cada vez mais e novas soluções e alternativas devem ser exploradas para manter a produção de carne e o mercado de exportação. Neste aspecto a rastreabilidade animal torna-se importante como meio para auxiliar na garantia do registro da vida de um animal, desde seu nascimento até o seu abate e exportação, incluindo o registro da permanência em fazendas e contatos com outros animais. O projeto OTAG (Operational Management and Geo-decisional Prototype to Track and Trace Agricultural Production) prevê a utilização de dispositivos eletrônicos de georefenciamento em animais, por meio de colares eletrônicos, e o registro da movimentação animal dentro das propriedades. A partir dos dados de movimentação animal, associados a outras bases de dados, pretende-se obter uma série de informações para diversos níveis de usuários do controle sanitário. O presente trabalho apresenta o uso de trajetórias para a identificação do contatos entre animais, a partir dos dados georefenciados de movimentação animal. A base de dados de contatos entre animais viabiliza a identificação de possíveis animais que contaminaram ou podem ser contaminados a partir de uma determinada ocorrência da febre aftosa, uma das doenças que podem atingir os animais e prejudicar a produção de carne bovina.SBIAgro 2009

Precise design of environmental data warehouses

People use data warehouses to help them make decisions. For example, public policy decision-makers can improve their decisions by using this technology to analyze the environmental effects of human activity. In production systems, data warehouses provide structures for extracting the knowledge required to optimize systems. Designing data warehouses is a complex task; designers need flexible and precise methods to help them create data warehouses and adapt their analysis criteria to developments in the decision-making process. In this paper, we introduce a flexible method based on UML (Unified Modeling Language). We introduce a UML profile for building multi-dimensional models and for choosing different criteria according to analysis requirements. This profile makes it possible to specify integrity constraints in OCL (Object Constraint Language). We apply our method to the construction of an environmental system for analyzing the use of certain agricultural fertilizers. We integrate various data sources into a multi-dimensional model showing several categories of analysis, and the consistency of data can be checked with OCL constraints

Designing data warehouses for geographic OLAP querying by using MDA

Data aggregation in Geographic Information Systems (GIS) is a desirable feature, spatial data are integrated in OLAP engines for this purpose. However, the development and operation of those systems is still a complex task due to methodologies followed. There are some ad hoc solutions that deal only with isolated aspects and do not provide developer and analyst with an intuitive, integrated and standard framework for designing all relevant parts. To overcome these problems, we have defined a model driven approach to accomplish Geographic Data Warehouse (GDW) development. Then, we have defined a data model required to implement and query spatial data. Its modeling is defined and implemented by using an extension of UML metamodel and it is also formalized by using OCL language. In addition, the proposal has been verified against a example scenario with sample data sets. For this purpose, we have accomplished a developing tool based on Eclipse platform and MDA standard. The great advantage of this solution is that developers can directly include spatial data at conceptual level, while decision makers can also conceptually make geographic queries without being aware of logical details.This work has been partially supported by the ESPIA project (TIN2007-67078) from the Spanish Ministry of Education and Science and by the QUASIMODO project (PAC08-0157-0668) from the Castilla-La Mancha Ministry of Education and Science (Spain). Octavio Glorio is funded by the University of Alicante under the 11th Latin American grant program

An adverbial approach for the formal specification of topological constraints involving regions with broad boundaries

Topological integrity constraints control the topological properties of spatial objects and the validity of their topological relationships in spatial databases. These constraints can be specified by using formal languages such as the spatial extension of the Object Constraint Language (OCL). Spatial OCL allows the expression of topological constraints involving crisp spatial objects. However, topological constraints involving spatial objects with vague shapes (e.g., regions with broad boundaries) are not supported by this language. Shape vagueness requires using appropriate topological operators (e.g., strongly Disjoint, fairly Meet) to specify valid relations between these objects; otherwise, the constraints cannot be respected. This paper addresses the problem of the lack of terminology to express topological constraints involving regions with broad boundaries. We propose an extension of Spatial OCL based on a geometric model for objects with vague shapes and an adverbial approach for topological relations between regions with broad boundaries. This extension of Spatial OCL is then tested on an agricultural database

Mapping of the Ronda peridotite massif (Spain) from AVIRIS spectro-imaging survey: A first attempt

In both AVIRIS and ISM data, through the use of mixing models, geological boundaries of the Ronda massif are identified with respect to the surrounding rocks. We can also yield first-order vegetation maps. ISM and AVIRIS instruments give consistent results. On the basis of endmember fraction images, it is then possible to discard areas highly vegetated or not belonging to the peridotite massif. Within the remaining part of the mosaic, spectro-mixing analysis reveals spectral variations in the peridotite massif between the well-exposed areas. Spatially organized units are depicted, related to differences in the relative depth of the absorption band at 1 micron, and it may be due to a different pyroxene content. At this stage, it is worth noting that, although mineralogical variations observed in the rocks are at a sub-pixel scale for the airborne analysis, we see an emerging spatial pattern in the distribution of spectral variations across the massif which might be prevailingly related to mineralogy. Although it is known from fieldwork that the Ronda peridotite massif exhibits mineralogical variations at local scale in the content of pyroxene, and at regional scale in different mineral facies, ranging from garnet-, to spinel- to plagioclase-lherzolites, no attempt has been done yet to produce a synoptic map relating the two scales of analysis. The present work is a first attempt to reach this objective, though a lot more work is still required. In particular, for the purpose of mineralogical interpretation, it is critical to relate the airborne observation to field work and laboratory spectra of Ronda rocks already obtained, with the use of image endmembers and associated reference endmembers. Also, the pretty rough linear mixing model used here is taken as a 'black-box' process which does not necessarily apply correctly to the physical situation at the sub-pixel level. One may think of using the ground-truth observations bearing on the sub-pixel statistical characteristics (texture, structural pattern, surface distribution and vegetation contribution (grass,..)) to produce a more advanced mixing model, physically appropriate to the geologic and environmental contexts

Brendan meets Columbus: A more commodious islescape

This paper proposes that we can reimagine insular literatures and medieval islescapes as commodious seas of cultural and intellectual loci that span time, culture, and text alike. By moving beyond the rhetoric of insular separation or connectivity, we can see that islands connect even when medieval minds saw separation. The essay focuses on the Brendan legend and the commodious cultural ‘sea of islands’ that it inhabits, a space that connects the modern reader to a history of other connections, fact to fancy, and the real and the imaginary. When sailing in this sea, Brendan meets Columbus, and the late medieval idea of a lost island spreads though space and time

Chemistry, Mineralogy, and Grain Properties at Namib and High Dunes, Bagnold Dune Field, Gale Crater, Mars: A Synthesis of Curiosity Rover Observations

The Mars Science Laboratory Curiosity rover performed coordinated measurements to examine the textures and compositions of aeolian sands in the active Bagnold dune field. The Bagnold sands are rounded to subrounded, very fine to medium sized (~45–500 μm) with ≥6 distinct grain colors. In contrast to sands examined by Curiosity in a dust-covered, inactive bedform called Rocknest and soils at other landing sites, Bagnold sands are darker, less red, better sorted, have fewer silt-sized or smaller grains, and show no evidence for cohesion. Nevertheless, Bagnold mineralogy and Rocknest mineralogy are similar with plagioclase, olivine, and pyroxenes in similar proportions comprising >90% of crystalline phases, along with a substantial amorphous component (35% ± 15%). Yet Bagnold and Rocknest bulk chemistry differ. Bagnold sands are Si enriched relative to other soils at Gale crater, and H_2O, S, and Cl are lower relative to all previously measured Martian soils and most Gale crater rocks. Mg, Ni, Fe, and Mn are enriched in the coarse-sieved fraction of Bagnold sands, corroborated by visible/near-infrared spectra that suggest enrichment of olivine. Collectively, patterns in major element chemistry and volatile release data indicate two distinctive volatile reservoirs in Martian soils: (1) amorphous components in the sand-sized fraction (represented by Bagnold) that are Si-enriched, hydroxylated alteration products and/or H_2O- or OH-bearing impact or volcanic glasses and (2) amorphous components in the fine fraction (<40 μm; represented by Rocknest and other bright soils) that are Fe, S, and Cl enriched with low Si and adsorbed and structural H_2O

Igneous mineralogy at Bradbury Rise: The first ChemCam campaign at Gale crater

Textural and compositional analyses using Chemistry Camera (ChemCam) remote microimager and laser-induced breakdown spectroscopy (LIBS) have been performed on five float rocks and coarse gravels along the first 100 m of the Curiosity traverse at Bradbury Rise. ChemCam, the first LIBS instrument sent to another planet, offers the opportunity to assess mineralogic diversity at grain-size scales (~ 100 µm) and, from this, lithologic diversity. Depth profiling indicates that targets are relatively free of surface coatings. One type of igneous rock is volcanic and includes both aphanitic (Coronation) and porphyritic (Mara) samples. The porphyritic sample shows dark grains that are likely pyroxene megacrysts in a fine-grained mesostasis containing andesine needles. Both types have magnesium-poor basaltic compositions and in this respect are similar to the evolved Jake Matijevic rock analyzed further along the Curiosity traverse both with Alpha-Particle X-ray Spectrometer and ChemCam instruments. The second rock type encountered is a coarse-grained intrusive rock (Thor Lake) showing equigranular texture with millimeter size crystals of feldspars and Fe-Ti oxides. Such a rock is not unique at Gale as the surrounding coarse gravels (such as Beaulieu) and the conglomerate Link are dominated by feldspathic (andesine-bytownite) clasts. Finally, alkali feldspar compositions associated with a silica polymorph have been analyzed in fractured filling material of Preble rock and in Stark, a putative pumice or an impact melt. These observations document magmatic diversity at Gale and describe the first fragments of feldspar-rich lithologies (possibly an anorthosite) that may be ancient crust transported from the crater rim and now forming float rocks, coarse gravel, or conglomerate clasts