264 research outputs found

    High-resolution 3D X-ray imaging of intracranial nitinol stents

    Get PDF
    Introduction To assess an optimized 3D imaging protocol for intracranial nitinol stents in 3D C-arm flat detector imaging. For this purpose, an image quality simulation and an in vitro study was carried out. Methods Nitinol stents of various brands were placed inside an anthropomorphic head phantom, using iodine contrast. Experiments with objects were preceded by image quality and dose simulations. We varied X-ray imaging parameters in a commercially interventional X-ray system to set 3D image quality in the contrast–noise–sharpness space. Beam quality was varied to evaluate contrast of the stents while keeping absorbed dose below recommended values. Two detector formats were used, paired with an appropriate pixel size and X-ray focus size. Zoomed reconstructions were carried out and snapshot images acquired. High contrast spatial resolution was assessed with a CT phantom. Results We found an optimal protocol for imaging intracranial nitinol stents. Contrast resolution was optimized for nickel–titanium-containing stents. A high spatial resolution larger than 2.1 lp/mm allows struts to be visualized. We obtained images of stents of various brands and a representative set of images is shown. Independent of the make, struts can be imaged with virtually continuous strokes. Measured absorbed doses are shown to be lower than 50 mGy Computed Tomography Dose Index (CTDI). Conclusion By balancing the modulation transfer of the imaging components and tuning the high-contrast imaging capabilities, we have shown that thin nitinol stent wires can be reconstructed with high contrast-to-noise ratio and good detail, while keeping radiation doses within recommended values. Experimental results compare well with imaging simulations

    The unexplained success of stentplasty vasospasm treatment

    Get PDF
    Background Cerebral vasospasm (CVS) following subarachnoid hemorrhage occurs in up to 70% of patients. Recently, stents have been used to successfully treat CVS. This implies that the force required to expand spastic vessels and resolve vasospasm is lower than previously thought. Objective We develop a mechanistic model of the spastic arterial wall to provide insight into CVS and predict the forces required to treat it. Material and Methods The arterial wall is modelled as a cylindrical membrane using a constrained mixture theory that accounts for the mechanical roles of elastin, collagen and vascular smooth muscle cells (VSMC). We model the pressure diameter curve prior to CVS and predict how it changes following CVS. We propose a stretch-based damage criterion for VSMC and evaluate if several commercially available stents are able to resolve vasospasm. Results The model predicts that dilatation of VSMCs beyond a threshold of mechanical failure is sufficient to resolve CVS without damage to the underlying extracellular matrix. Consistent with recent clinical observations, our model predicts that existing stents have the potential to provide sufficient outward force to successfully treat CVS and that success will be dependent on an appropriate match between stent and vessel. Conclusion Mathematical models of CVS can provide insights into biological mechanisms and explore treatment approaches. Improved understanding of the underlying mechanistic processes governing CVS and its mechanical treatment may assist in the development of dedicated stents

    Quality of life and functionality after total hip arthroplasty: a long-term follow-up study

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>There is a lack of data on the long-term outcome of total hip arthroplasty procedures, as assessed by validated tools.</p> <p>Methods</p> <p>We conducted a follow-up study to evaluate the quality of life and functionality of 250 patients an average of 16 years (range: 11-23 years) after total hip arthroplasty using a validated assessment set including the SF-36 questionnaire, Harris Hip Score, WOMAC score, Functional Comorbidity Index, and a study specific questionnaire. Models of multiple stepwise linear and logistic regression analysis were constructed to evaluate the relationships between several explanatory variables and these functional outcomes.</p> <p>Results</p> <p>The SF-36 physical indexes of these patients compared negatively with the normative values but positively with the results obtained in untreated subjects with severe hip osteoarthritis. Similar results were detected for the Harris Hip Score and WOMAC score. There was a 96% rate of post-surgical satisfaction. Hip functionality and comorbidities were the most important determinants of physical measures on the SF-36.</p> <p>Conclusions</p> <p>Patients who had undergone total hip arthroplasty have impaired long-term self-reported physical quality of life and hip functionality but they still perform physically better than untreated patients with advanced hip osteoarthritis. However, the level of post-surgical satisfaction is high.</p

    eCLIPs bifurcation remodeling system for treatment of wide neck bifurcation aneurysms with extremely low dome-to-neck and aspect ratios: a multicenter experience

    Get PDF
    In our case series, 24 patients treated at 12 international centers were taken from a larger prospective voluntary post-marketing registry of 65 patients treated with the eCLIPs device and coiling. Those who had WNBAs at either the carotid or basilar terminus with a DTN ratio Wide necked bifurcation aneurysms (WNBA) are among the most difficult aneurysms to treat. Very low dome-to-neck (DTN) and aspect ratios provide an even greater challenge in the management of WNBAs. We present the safety and efficacy profile for endovascular clip system (eCLIPs) device in the treatment of this subset of WNBAs with very unfavorable morphologies.Our series of patients with aneurysms having adverse DTN and aspect ratios demonstrated that the eCLIPs device has a safety and efficacy profile comparable with currently available devices in the treatment of WNBAs.The eCLIPs device was successfully deployed in 23 cases (96%). One patient (4.2%) died due to guidewire perforation distal to the implant site. No other complications were documented. After a mean follow-up of 15.8 months (range 3-40 months), good radiologic outcomes (modified Raymond-Roy classification (MRRC) scores of 1 or 2) were documented in 20 of 21 patients (95%) with follow-up data. The lone patient with an MRRC score of 3 showed coiled compaction after incomplete neck coverage with the device.</div

    Bees increase seed set of wild plants while the proportion of arable land has a variable effect on pollination in European agricultural landscapes

    Get PDF
    Background and aims - Agricultural intensification and loss of farmland heterogeneity have contributed to population declines of wild bees and other pollinators, which may have caused subsequent declines in insect-pollinated wild plants. Material and methods - Using data from 37 studies on 22 pollinator-dependent wild plant species across Europe, we investigated whether flower visitation and seed set of insect-pollinated plants decline with an increasing proportion of arable land within 1 km. Key results - Seed set increased with increasing flower visitation by bees, most of which were wild bees, but not with increasing flower visitation by other insects. Increasing proportion of arable land had a strongly variable effect on seed set and flower visitation by bees across studies. Conclusion - Factors such as landscape configuration, local habitat quality, and temporally changing resource availability (e.g. due to mass-flowering crops or honey bee hives) could have modified the effect of arable land on pollination. While our results highlight that the persistence of wild bees is crucial to maintain plant diversity, we also show that pollen limitation due to declining bee populations in homogenized agricultural landscapes is not a universal driver causing parallel losses of bees and insect-pollinated plants.Peer reviewe

    Direct targets of the transcription factors ABA-Insensitive(ABI)4 and ABI5 reveal synergistic action by ABI4 and several bZIP ABA response factors

    Get PDF
    The plant hormone abscisic acid (ABA) is a key regulator of seed development. In addition to promoting seed maturation, ABA inhibits seed germination and seedling growth. Many components involved in ABA response have been identified, including the transcription factors ABA insensitive (ABI)4 and ABI5. The genes encoding these factors are expressed predominantly in developing and mature seeds, and are positive regulators of ABA mediated inhibition of seed germination and growth. The direct effects of ABI4 and ABI5 in ABA response remain largely undefined. To address this question, plants over-expressing ABI4 or ABI5 were used to allow identification of direct transcriptional targets. Ectopically expressed ABI4 and ABI5 conferred ABA-dependent induction of slightly over 100 genes in 11 day old plants. In addition to effector genes involved in seed maturation and reserve storage, several signaling proteins and transcription factors were identified as targets of ABI4 and/or ABI5. Although only 12% of the ABA- and ABI-dependent transcriptional targets were induced by both ABI factors in 11 day old plants, 40% of those normally expressed in seeds had reduced transcript levels in both abi4 and abi5 mutants. Surprisingly, many of the ABI4 transcriptional targets do not contain the previously characterized ABI4 binding motifs, the CE1 or S box, in their promoters, but some of these interact with ABI4 in electrophoretic mobility shift assays, suggesting that sequence recognition by ABI4 may be more flexible than known canonical sequences. Yeast one-hybrid assays demonstrated synergistic action of ABI4 with ABI5 or related bZIP factors in regulating these promoters, and mutant analyses showed that ABI4 and these bZIPs share some functions in plants
    corecore