An Investigation into the Sonic Signature of Three Classic Dynamic Range Compressors

Dynamic range compression (DRC) is a much-used process in music production. Traditionally the process was implemented in order to control the dynamic range of program material to minimize the potential of overloading recording devices. However, over time DRC became a process that was applied more as a creative effect and less as a preventative measure. In a professional recording environment it is not uncommon for engineers to have access to several different types of DRC unit, each with their own purportedly unique sonic signature. This paper investigates the differences between three popular vintage dynamic range compressors by conducting a number of measurements on the devices. The compressors were tested using: THD measurements, tone bursts, and objective analysis of music-based material using spectrum analysis and audio feature extracti

Software Sustainability: The Modern Tower of Babel

<p>The aim of this paper is to explore the emerging definitions of software sustainability from the field of software engineering in order to contribute to the question, what is software sustainability?</p

Quantifying error introduced by iterative closest point image registration

Objectives: The aim of this paper was to quantify the analysis error introduced by iterative closest point (ICP) image registration. We also investigated whether a subsequent subtraction process can reduce process error. Methods: We tested metrology and two 3D inspection software using calibration standards at 0.39 μm, and 2.64 μm and mathematically perfect defects (softgauges) at 2 and 20 μm, on free form surfaces of increasing complexity and area, both with and without registration. Errors were calculated in percentage relative to the size of the defect being measured. Data were analysed in GraphPad Prism 9, normal and two-way ANOVA with post-hoc Tukey's was applied. Significance was inferred at p &lt; 0.05. Results: Using ICP registration introduced errors from 0 % to 15.63 % of the defect size depending on the surface complexity and size of the defect. Significant differences were observed in analysis measurements between metrology and 3D inspection software and within different 3D inspection software, however, one did not show clear superiority over another. Even in the absence of registration, defects at 0.39 μm, and 2.64 μm produced substantial measurement error (13.39–77.50 % of defect size) when using 3D inspection software. Adding an additional data subtraction process reduced registration error to negligible levels (&lt;1 % independent of surface complexity or area). Conclusions: Commercial 3D inspection software introduces error during direct measurements below 3 μm. When using an ICP registration, errors over 15 % of the defect size can be introduced regardless of the accuracy of adjacent registration surfaces. Analysis output between software are not consistently repeatable or comparable and do not utilise ISO standards. Subtracting the datasets and analysing the residual difference reduced error to negligible levels. Clinical significance: This paper quantifies the significant errors and inconsistencies introduced during the registration process even when 3D datasets are true and precise. This may impact on research diagnostics and clinical performance. An additional data processing step of scan subtraction can reduce this error but increases computational complexity.</p

Biologically Based Restorative Management of Tooth Wear

The prevalence and severity of tooth wear is increasing in industrialised nations. Yet, there is no high-level evidence to support or refute any therapeutic intervention. In the absence of such evidence, many currently prevailing management strategies for tooth wear may be failing in their duty of care to first and foremost improve the oral health of patients with this disease. This paper promotes biologically sound approaches to the management of tooth wear on the basis of current best evidence of the aetiology and clinical features of this disease. The relative risks and benefits of the varying approaches to managing tooth wear are discussed with reference to long-term follow-up studies. Using reference to ethical standards such as “The Daughter Test”, this paper presents case reports of patients with moderate-to-severe levels of tooth wear managed in line with these biologically sound principles

An in-situ pilot study to investigate the native clinical resistance of enamel to erosion

OBJECTIVES: To investigate the differences in susceptibility of the surface of native and polished enamel to dietary erosion using an in-situ model.METHODS: Thirty healthy volunteers (n = 10 per group) wore mandibular appliances containing 2 native and 2 polished enamel samples for 30 min after which, the samples were exposed to either an ex-vivo or in-vivo immersion in orange juice for 5, 10 or 15 min and the cycle repeated twice with an hour's interval between them. Samples were scanned with a non-contacting laser profilometer and surface roughness was extracted from the data, together with step height and microhardness change on the polished enamel samples.RESULTS: All volunteers completed the study. For native enamel there were no statistical difference between baseline roughness values versus post erosion. Polished enamel significantly increased mean (SD) Sa roughness from baseline for each group resulting in roughness change of 0.04 (0.03), 0.06 (0.04), 0.04 (0.03), 0.06 (0.03), 0.08 (0.05) and 0.09 (0.05) μm respectively. With statistical differences between roughness change 45 min in-vivo versus 45 min ex-vivo (p &lt; 0.05). Microhardness significantly decreased for each polished group, with statistical differences in hardness change between 30 min in-vivo versus 30 min ex-vivo (p &lt; 0.05), 45 min in-vivo versus 30 min ex-vivo (p &lt; 0.01), 45 min in-vivo versus 45 min ex-vivo (p &lt; 0.01).CONCLUSIONS: The native resistance to erosion provided clinically is a combination of the ultrastructure of outer enamel, protection from the salivary pellicle and the overall effects of the oral environment. CLINICALTRIALS.GOV IDENTIFIER: NCT03178968.CLINICAL SIGNIFICANCE: This study demonstrates that outer enamel is innately more resistant to erosion which is clinically relevant as once there has been structural breakdown at this level the effects of erosive wear will be accelerated.</p

First estimates of population size and home range of Caribbean reef and nurse sharks using photo-identification and BRUVS

The assessment of parameters population size and individual home range is important for effective conservation management of sharks. This study uses the novel application of photo identification (photo-ID) to BRUVS footage as a non-invasive alternative to tagging in order to generate individual capture histories. These were used in mark-recapture models to estimate effective population sizes and to determine home ranges. In the Cayman Islands a total of 499 shark sightings of six coastal shark species were recorded on BRUVS from 2015 - 2018, but re-sighting rates were only sufficient for the determination of population parameters for two species - Caribbean reef shark (Carcharhinus perezi) and nurse shark (Ginglymostoma cirratum). The calculated super-population sizes for Caribbean reef shark (180 ± 37 SE) and nurse shark (336 ± 61 SE) were greater than the estimates for each species based on a closed-population model (Caribbean reef shark: 128 ± 40 SE, nurse shark: 249 ± 48 SE), though both measures indicated that there were about twice as many nurse sharks (1.3 - 1.8 sharks/km2) as Caribbean reef sharks (0.7 – 1 shark/km2) within the study area. The demographic compositions included numerous immature individuals, indicating that breeding of both species takes place within the study area of 188 km2. Most recognizable individuals of both species showed linear home ranges of &lt;20 km, but a few individuals were observed to have moved longer distances (Caribbean reef shark: 125.37 km, nurse shark: 156.07 km). The data indicate that the home ranges and long-distance movements of individual sharks observed within the islands’ marine protected areas (MPAs) often extend to areas beyond the MPA’s boundary, potentially exposing them to fishing activities. This study provides the first estimates of population size for Caribbean reef and nurse sharks in the Cayman Islands and the first estimate of a Caribbean reef shark population globally

Applying future industrialised processes to construction

Construction has traditionally relied on specifications and 2D drawings to convey material properties, performance details and location information. Advanced 3D solid modelling and digital fabrication methods are growing in construction. Iconic building design is driving the industry towards a new era of the Building Information Model (BIM) where a building is modelled entirely using 3D solid CAD tools containing all the required information for construction. CNC machinery can utilise this information to manufacture components enabling highly bespoke and non-repeating components to be cost competitive. Rapid Manufacturing machines also use this information to build components by selectively adding material rather than the traditional subtractive or formative processes. The BIM drives current machines for the production of models for inspection or to explore assembly issues. Recent developments are scaling up these processes so that whole building components can be built using a mega scale, additive machine. This paper explores some of the issues relating to the design of building components and discusses issues on the implementation of these process

Combination of leukocyte and platelet–rich fibrin and demineralized bovine bone graft enhanced bone formation and healing after maxillary sinus augmentation: a randomized clinical trial

Background and objective: The resorption of alveolar ridge bone and maxillary sinus pneumatization are challenges to implant-supported prosthetic rehabilitation. Bone regeneration using bone substitutes and growth factors are alternatives for maxillary sinus augmentation (MSA). Therefore, we sought to evaluate the effects of the association between leukocyte and platelet–rich fibrin (L-PRF) and deproteinized bovine bone mineral (DBBM) in MSA procedures. Materials and methods: Thirty-six maxillary sinuses from 24 individuals were included in this randomized clinical trial. The maxillary sinuses were randomly grafted with LPRF and DBBM (test group) or grafted only with DBBM (positive control). Dental implants were installed in the test group following two periods of evaluation: after 4 (DBBM+LPRF4) and 8 (DBBM+LPFR8) months of sinus graft healing, while the control group received implants only after 8 months. Cone beam computed tomography (CBCT) was taken 1 week after surgery (T1) and before implant placement (T2). Bone samples were collected during implant placement for histomorphometric and immunohistochemical (IHC) analysis. The primary implant stability was assessed by resonance frequency analysis. Results: CBCT analysis demonstrated a significant decrease in bone volume from T1 to T2 in all groups without differences among them. Histologically, the test group showed significantly increase in bone neoformation in both periods of evaluation (LPRF+DBBM4: 44.70±14.01%; LPRF+DBBM8: 46.56±12.25%) compared to the control group (32.34±9.49%). The control group showed the highest percentage of residual graft. IHC analysis showed increased staining intensity of osteocalcin (OCN), vascular endothelial growth factor (VEGF), and runt related transcription factor 2 (RUNX-2) in LPRF+DBBM4 group, and osteopontin (OPN) in the L-PRF+DBBM8. Primary implant stability was successfully achieved (above 60 in implant stability quotient) in all the evaluated groups. Conclusion: Combination of L-PRF and DBBM increased and accelerated new bone formation allowing early implant placement probably due to the higher protein expression of RUNX2, VEGF, OCN, and OPN. These data suggest that the use of L-PRF might be an interesting alternative to use in combination with DBBM for augment the maxillary sinuses allowing the installation of appropriate length implants in shorter period of time. Clinical relevance: This study showed improvement in bone neoformation and accelerated healing when associating L-PRF and DBBM for maxillary sinus augmentation procedures. Trial registration: This study was registered before participant recruitment in Brazilian Registry of Clinical Trials (ReBEC - RBR-95m73t).</p

Embracing the variety of sustainable business models: Social entrepreneurship, corporate intrapreneurship, creativity, innovation, and other approaches to sustainability challenges

status: publishe

Use of the out-of-hours emergency dental service at two south-east London hospitals

<p>Abstract</p> <p>Background</p> <p>Prior to the introduction of the 2006 NHS dental contract in England and Wales, general dental practitioners (GDPs) were responsible for the provision of out-of-hours (OOH) emergency dental services (EDS); however there was great national variation in service provision. Under the contractual arrangements introduced 1^stApril 2006, local commissioning agencies became formally responsible for the provision of out-of-hours emergency dental services. This study aimed to examine patients' use of an out-of-hours emergency dental service and to determine whether the introduction of the 2006 national NHS dental contract had resulted in a change in service use, with a view to informing future planning and commissioning of care.</p> <p>Methods</p> <p>A questionnaire was administered to people attending the out-of-hours emergency dental service at two inner city London hospitals over two time periods; four weeks before and six months after the introduction of the dental contract in April 2006. The questionnaire explored: reasons for attending; dental registration status and attendance; method of access; knowledge and use of NHS Direct; satisfaction with the service; future preferences for access and use of out-of-hours dental services. Data were compared to determine any impact of the new contract on how and why people accessed the emergency dental service.</p> <p>Results</p> <p>The response rate was 73% of attendees with 981 respondents for the first time period and 546 for the second. There were no significant differences between the two time periods in the gender, age, ethnic distribution or main language of service users accessing the service. Overall, the main dental problem was toothache (72%) and the main reason for choosing this service was due to the inability to access another emergency dental service (42%). Significantly fewer service users attended the out-of-hours emergency dental service during the second period because they could not get an appointment with their own dentist (p = 0.002 from 28% to 20%) and significantly more service users in the second period felt the emergency dental service was easier to get to than their own dentist (P = 0.003 from 8% to 14%). Service users found out about the service from multiple sources, of which family and friends were the most common source (30%). In the second period fewer service users were obtaining information about the service from dental receptionists (P = 0.002 from 14% to 9%) and increased use of NHS Direct for a dental problem was reported (P = 0.002 from 16% to 22%) along with more service users being referred to the service by NHS Direct (P = 0.02 from 19% to 24%). The most common preference for future emergency dental care was face-to-face with a dentist (79%).</p> <p>Conclusion</p> <p>This study has provided an insight into how and why people use an out-of-hours emergency dental service and has helped to guide future commissioning of these services. Overall, the service was being used in much the same way both before and after the 2006 dental contract. Significantly more use was being made of NHS Direct after April 2006; however, informal information networks such as friends and family remain an important source of information about accessing emergency dental services.</p