Rationalisation in public dental care – impact on clinical work tasks and mechanical exposure for dentists – a prospective study

Swedish dentistry has been exposed to frequent rationalisation initiatives during the last half century. Previous research has shown that rationalisation often results in increased risk of developing work-related musculoskeletal disorders, thus reducing sustainability in the production system. In this prospective study, we assessed mechanical exposures among Swedish dentists in relation to specific rationalisations of clinical dental work during a six-year period. Body postures and movements of 12 dentists were assessed by inclinometry synchronised to video recordings of their work. No rationalisation effects could be shown in terms of a reduction in non-value-adding work (waste'), and at job level, no major differences in mechanical exposure could be shown between baseline and follow-up. Conclusion: The present rationalisation measures in dentistry do not seem to result in rationalisation at job level, but may potentially be more successful at the overall dental system level. Practitioner summary: In contrast to many previous investigations of the mechanical exposure implications of rationalisation, the present rationalisation measures did not increase the level of risk for dentists. It is highlighted that all occupations involved in the production system should be investigated to assess production system sustainability

Clarification of the Three-Body Decay of 12C (12.71 MeV)

Using β decays of a clean source of 12 N produced at the IGISOL facility, we have measured the breakup of the 12 C (12.71 MeV) state into three α particles with a segmented particle detector setup. The high quality of the data permits solving the question of the breakup mechanism of the 12.71 MeV state, a longstanding problem in few-body nuclear physics. Among existing models, a modified sequential model fits the data best, but systematic deviations indicate that a three-body description is needed

Projectile Coulomb excitation with fast radioactive beams

5 pages, 5 figures, 1 table.-- PACS nrs.: 23.20.Ck; 27.20.+n.We report a search for γ rays emanating from Coulomb excitation of fast (30-46 MeV/u) radioactive projectiles He-8, Be-11, Be-12, Be-14 interacting with a lead target. These are clearly identified by their Doppler shift. The 320 keV 1/2(-) --> 1/2(+)γ transition from Be-11 was observed with a cross-section of 191 ± 26 mb which is noticeably less than expected from the known lifetime and in the perturbation limit of pure Coulomb excitation. In the other nuclei rather stringent upper limits of 0.01 to 0.2 Weisskopf units, are placed on the hypothetical transition to 1(-) states.We would like to thank F. Geoffroy, R. Hue and L. Petizon for their technical assistance during the experiment, N. Alamanos, G. Baur aud C. Bertulani for discussions and R. Lombard for drawing our attention to the Bertlmann-Martin bound. This work was partly supported by la Région Basse Normandie. One of us, G. Schrieder, would like to thank for the support by the German Federal Minister for Research and Technology (BMFT) under contract 06DA641.Peer reviewe

Study of β-delayed charged particle emission of 11Li: Evidence of new decay channels

5 pags., 3 figs. -- 9th International Conference on Clustering Aspects of Nuclear Structure and Dynamics (CLUSTERS'07) 3–7 September 2007, Stratford upon Avon, UKThe break-up of the 18.2 MeV state in 11Be was studied in a 11Li β-decay experiment. We report here on the study of the dominating breakup channels involving na6He or 3n2α in the final state, with special emphasis dedicated in this contribution to the three-particle channel. The two emitted charged particles were detected in coincidence using a highly segmented experimental set-up. The observed experimental energy-vs-energy scatter plot indicates a sequential breakup where nuclei of mass 4, alpha particles, and mass 7, 7He, are involved. A Monte-Carlo simulation of the sequential channel, 11Be* → α + 7He → nα6He was performed and compared to the experimental data and to a simulation of the direct break-up of the 18.2 MeV state nα6He by phase space energy distribution. The energy-versus-energy plot are explained by the sequential simulation but not by the phase space simulation. © 2008 IOP Publishing Ltd

A computerized biomechanical model--Development of and use in studying gross body actions

Gross body actions involved in heavy industry, e.g. lifting and carrying materials, are often the cause of injury to the musculoskeletal system. A computer model is developed which treats the human body as a series of seven links from which reactive forces and torques are computed at each articulation during various simulated materials handling tasks. In addition, an analysis of shearing and compressing forces at the lower lumbar spine is included. The assumptions of the present model are presented, along with a discussion of future models.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/32890/1/0000269.pd

MATRIX COMPOSITION OF ZIRCALOY-4

La composition de la matrice de deux materiaux expérimental Zircaloy-4 ont été analysée. Les deux materiaux ont été subis aux traitements thermiques différents et ils ont pris des qualités corrosives très différentes. La matrice de chacun des materiaux est bien appauvrie des éléments d'alliage. Les analyses par sonde atomique se montrent une différence quintuple significative en contenue de fer. Cela propose que la composition de la matrice est d'importance pour les qualités corrosives ; cependant, plusieurs d'analyses doivent être faites pour la compréhension des causes fondamentales.The matrix composition of two experimental Zircaloy-4 cladding tube materials has been analysed. The two materials have undergone different heat treatments and have vastly different corrosion properties. In both materials the matrix is markedly depleted of alloying elements. However, atom probe analyses show a significant difference in Fe content by a factor of five. This suggests that the matrix composition is of importance for the corrosion properties but more analyses have to be made in order to understand the underlying reasons

PREFERENTIAL FIELD EVAPORATION DURING ATOM PROBE ANALYSIS OF ZIRCALOY-4

Previous experiments using atom probe analysis to determine the matrix composition of Zircaloy-4, a zirconium alloy used for nuclear fuel tubes in pressurised water reactors, showed a higher Sn concentration in some analysis, compared to the chemical analysis of the materials studied. This effect had no evident metallurgical explanation, and was considered to depend on preferential field evaporation of zirconium. A study has been performed in order to reduce the loss of zirconium between pulses. By varying the conditions of analysis, i.e., temperature and pulse fraction, it was found that the correct values for the matrix composition were obtained using a temperature of 60 K and a pulse fraction of 15 percent of the holding field

Working conditions, health and productivity among dentists in Swedish public dental care - a prospective study during a 5-year period of rationalisation

In recent decades, comprehensive rationalisations have been implemented in public dentistry in Sweden. How rationalisations affect working conditions, health and production from a long-term perspective has been poorly investigated. This study aims to analyse changes and associations in dentists' working conditions, health and productivity during a 5-year period. In 2003 and 2008, 65 dentists responded to questionnaires measuring work conditions and health. Treatment times for patients and productivity were tracked in electronic registers. Paired t-tests showed that the number of treated adult patients per dentist increased, and perceived physical working conditions improved while perceived work control and leadership deteriorated. Structural equation modelling showed that physical factors were important for health and productivity. When assessing risks in the work environment, there is a need to understand the interaction of effects on working conditions and health due to rationalisations so as to increase the sustainability of production systems. Practioner Summary: Dentistry in Sweden has undergone considerable change. Questionnaire surveys with dentists, undertaken in 2003 and 2008, found that the present rationalisations resulted in improved perceived physical working conditions. Aspects of the psychosocial working environment had deteriorated, however. This is a concern as health and workability are important for workplace efficiency