Timing of deposition, orogenesis and glaciation within the Dalradian rocks of Scotland: constraints from U-Pb zircon ages

The stratigraphical and structural continuity of the Late Proterozoic Dalradian rocks of the Scottish Highlands is re-examined in the light of new U-Pb zircon ages on the tuffs belonging to the Tayvallich Volcanic Formation (601 ñ 4 Ma), and on the late Grampian 'Newer Gabbros' (470 ñ 9 Ma) of Insch and Morven-Cabrach in Aberdeenshire. These age data, together with the existing 590 ñ 2 Ma age for the Ben Vuirich Granite, provide key radiometric constraints on the evolution of the Dalradian block, and the implications arising from these ages are critically assessed. Three main conclusions are drawn. (1) The entire Caledonian orogeny, although short-lived, is unlikely to have affected sediments of Arenig age and a break probably occurs between those Dalradian sediments of late Proterozoic (<600 Ma) age and the Ordovician rocks of the Highland Border Complex. (2) A period of crustal thickening probably affected some Dalradian rocks prior to 590 Ma. Such an event is indicated by both the polymetamorphic histories of the lower parts of the Dalradian pile and the contact metamorphic assemblages within the aureole of the Ben Vuirich Granite, which are incompatible with sedimentary thicknesses. (3) Age constraints on global Late Proterozoic glacial activity also suggest that the Dalradian stratigraphy is broken into discrete smaller units. Models involving continuous deposition of Dalradian sediments from pre-750 Ma to 470 Ma are rejected

UV and EUV Instruments

We describe telescopes and instruments that were developed and used for astronomical research in the ultraviolet (UV) and extreme ultraviolet (EUV) regions of the electromagnetic spectrum. The wavelength ranges covered by these bands are not uniquely defined. We use the following convention here: The EUV and UV span the regions ~100-912 and 912-3000 Angstroem respectively. The limitation between both ranges is a natural choice, because the hydrogen Lyman absorption edge is located at 912 Angstroem. At smaller wavelengths, astronomical sources are strongly absorbed by the interstellar medium. It also marks a technical limit, because telescopes and instruments are of different design. In the EUV range, the technology is strongly related to that utilized in X-ray astronomy, while in the UV range the instruments in many cases have their roots in optical astronomy. We will, therefore, describe the UV and EUV instruments in appropriate conciseness and refer to the respective chapters of this volume for more technical details.Comment: To appear in: Landolt-Boernstein, New Series VI/4A, Astronomy, Astrophysics, and Cosmology; Instruments and Methods, ed. J.E. Truemper, Springer-Verlag, Berlin, 201

Lichenometric dating (lichenometry) and the biology of the lichen genus rhizocarpon:challenges and future directions

Lichenometric dating (lichenometry) involves the use of lichen measurements to estimate the age of exposure of various substrata. Because of low radial growth rates and considerable longevity, species of the crustose lichen genus Rhizocarpon have been the most useful in lichenometry. The primary assumption of lichenometry is that colonization, growth and mortality of Rhizocarpon are similar on surfaces of known and unknown age so that the largest thalli present on the respective faces are of comparable age. This review describes the current state of knowledge regarding the biology of Rhizocarpon and considers two main questions: (1) to what extent does existing knowledge support this assumption; and (2) what further biological observations would be useful both to test its validity and to improve the accuracy of lichenometric dates? A review of the Rhizocarpon literature identified gaps in knowledge regarding early development, the growth rate/size curve, mortality, regeneration, competitive effects, colonization, and succession on rock surfaces. The data suggest that these processes may not be comparable on different rock surfaces, especially in regions where growth rates and thallus turnover are high. In addition, several variables could differ between rock surfaces and influence maximum thallus size, including rate and timing of colonization, radial growth rates, environmental differences, thallus fusion, allelopathy, thallus mortality, colonization and competition. Comparative measurements of these variables on surfaces of known and unknown age may help to determine whether the basic assumptions of lichenometry are valid. Ultimately, it may be possible to take these differences into account when interpreting estimated dates

Baryons: What, When and Where?

We review the current state of empirical knowledge of the total budget of baryonic matter in the Universe as observed since the epoch of reionization. Our summary examines on three milestone redshifts since the reionization of H in the IGM, z = 3, 1, and 0, with emphasis on the endpoints. We review the observational techniques used to discover and characterize the phases of baryons. In the spirit of the meeting, the level is aimed at a diverse and non-expert audience and additional attention is given to describe how space missions expected to launch within the next decade will impact this scientific field.Comment: Proceedings Review for "Astrophysics in the Next Decade: JWST and Concurrent Facilities", ed. X. Tielens, 38 pages, 10 color figures. Revised to address comments from the communit

Search for the associated production of the Higgs boson with a top-quark pair

A search for the standard model Higgs boson produced in association with a top-quark pair t t ¯ H (tt¯H) is presented, using data samples corresponding to integrated luminosities of up to 5.1 fb −1 and 19.7 fb −1 collected in pp collisions at center-of-mass energies of 7 TeV and 8 TeV respectively. The search is based on the following signatures of the Higgs boson decay: H → hadrons, H → photons, and H → leptons. The results are characterized by an observed t t ¯ H tt¯H signal strength relative to the standard model cross section, μ = σ/σ SM ,under the assumption that the Higgs boson decays as expected in the standard model. The best fit value is μ = 2.8 ± 1.0 for a Higgs boson mass of 125.6 GeV

Measurement of the inclusive 3-jet production differential cross section in proton-proton collisions at 7 TeV and determination of the strong coupling constant in the TeV range

This paper presents a measurement of the inclusive 3-jet production differential cross section at a proton–proton centre-of-mass energy of 7 TeV using data corresponding to an integrated luminosity of 5 fb-1 collected with the CMS detector. The analysis is based on the three jets with the highest transverse momenta. The cross section is measured as a function of the invariant mass of the three jets in a range of 445–3270 GeV and in two bins of the maximum rapidity of the jets up to a value of 2. A comparison between the measurement and the prediction from perturbative QCD at next-to-leading order is performed. Within uncertainties, data and theory are in agreement. The sensitivity of the observable to the strong coupling constant αS is studied. A fit to all data points with 3-jet masses larger than 664 GeV gives a value of the strong coupling constant of αS(MZ)=0.1171±0.0013(exp)-0.0047+0.0073(theo)

Constraints on the Higgs boson width from off-shell production and decay to Z-boson pairs

Constraints are presented on the total width of the recently discovered Higgs boson, &#915;H , using its relative on-shell and off-shell production and decay rates to a pair of Z bosons, where one Z boson decays to an electron or muon pair, and the other to an electron, muon, or neutrino pair. The analysis is based on the data collected by the CMS experiment at the LHC in 2011 and 2012, corresponding to integrated luminosities of 5.1 fb&#8722;1 at a center-of-mass energy s=7 TeV and 19.7 fb&#8722;1 at s=8 TeV . A simultaneous maximum likelihood fit to the measured kinematic distributions near the resonance peak and above the Z-boson pair production threshold leads to an upper limit on the Higgs boson width of &#915;H<22 MeV at a 95% confidence level, which is 5.4 times the expected value in the standard model at the measured mass of mH=125.6 GeV

Measurement of prompt Jψ\psi pair production in pp collisions at \sqrt s = 7 Tev

Production of prompt J/ &#968; meson pairs in proton-proton collisions at s s&#8730; = 7 TeV is measured with the CMS experiment at the LHC in a data sample corresponding to an integrated luminosity of about 4.7 fb &#8722;1 . The two J/ &#968; mesons are fully reconstructed via their decays into &#956; + &#956; &#8722; pairs. This observation provides for the first time access to the high-transverse-momentum region of J/ &#968; pair production where model predictions are not yet established. The total and differential cross sections are measured in a phase space defined by the individual J/ &#968; transverse momentum ( p T J/ &#968; ) and rapidity (| y J/ &#968; |): | y J/ &#968; | 6.5 GeV/ c ; 1.2 4.5 GeV/ c . The total cross section, assuming unpolarized prompt J/ &#968; pair production is 1.49 ± 0.07 (stat) ±0.13 (syst) nb. Different assumptions about the J/ &#968; polarization imply modifications to the cross section ranging from &#8722;31% to +27%

Search for the associated production of the Higgs boson with a top-quark pair

Open Access. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0), which permits any use, distribution and reproduction in any medium, provided the original author(s) and source are credited.A search for the standard model Higgs boson produced in association with a top-quark pair (t t ¯ H) is presented, using data samples corresponding to integrated luminosities of up to 5.1 fb-1 and 19.7 fb-1 collected in pp collisions at center-of-mass energies of 7 TeV and 8 TeV respectively. The search is based on the following signatures of the Higgs boson decay: H → hadrons, H → photons, and H → leptons. The results are characterized by an observed t t ¯ H \mathrm{t}\overline{\mathrm{t}}\mathrm{H} signal strength relative to the standard model cross section, μ=σ/σ SM,under the assumption that the Higgs boson decays as expected in the standard model. The best fit value is μ = 2.8 ± 1.0 for a Higgs boson mass of 125.6 GeV