Energy-Efficient Scheduling and Power Allocation in Downlink OFDMA Networks with Base Station Coordination

This paper addresses the problem of energy-efficient resource allocation in the downlink of a cellular OFDMA system. Three definitions of the energy efficiency are considered for system design, accounting for both the radiated and the circuit power. User scheduling and power allocation are optimized across a cluster of coordinated base stations with a constraint on the maximum transmit power (either per subcarrier or per base station). The asymptotic noise-limited regime is discussed as a special case. %The performance of both an isolated and a non-isolated cluster of coordinated base stations is examined in the numerical experiments. Results show that the maximization of the energy efficiency is approximately equivalent to the maximization of the spectral efficiency for small values of the maximum transmit power, while there is a wide range of values of the maximum transmit power for which a moderate reduction of the data rate provides a large saving in terms of dissipated energy. Also, the performance gap among the considered resource allocation strategies reduces as the out-of-cluster interference increases.Comment: to appear on IEEE Transactions on Wireless Communication

Green and fast DSL via joint processing of multiple lines and time-frequency packed modulation

In this paper, strategies to enhance the performance, in terms of available data-rate per user, energy efficiency, and spectral efficiency, of current DSL lines are proposed. In particular, a system wherein a group of copper wires is jointly processed at both ends of the communication link is considered. For such a scenario, (a) the statistical multiplexing gain for the generic end user is analyzed; (b) a resource allocation scheme aimed at energy efficiency maximization is proposed; and, finally, (c) time-frequency packed modulation schemes are investigated for increased spectral efficiency. Results show that a joint processing of even a limited number of wires at both ends of the communication links brings remarkable performance improvements with respect to the case of individual point-to-point DSL connections; moreover, the considered solution does represent a viable means to increase, in the short term, the data-rate of the wired access network, without an intensive (and expensive) deployment of optical links

Green and fast DSL via joint processing of multiple lines and time–frequency packed modulation

In this paper, strategies to enhance the performance, in terms of available data-rate per user, energy efficiency, and spectral efficiency, of current digital subscriber lines (DSL) are proposed. In particular, a system wherein a group of copper wires is jointly processed at both ends of the communication link is considered. For such a scenario, a resource allocation scheme aimed at energy efficiency maximization is proposed, and, moreover, time–frequency packed modulation schemes are investigated for increased spectral efficiency. Results show that a joint processing of even a limited number of wires at both ends of the communication links brings remarkable performance improvements with respect to the case of individual point-to-point DSL connections; moreover, the considered solution does represent a viable means to increase, in the short term, the data-rate of the wired access network, without an intensive (and expensive) deployment of optical links

Decentralized Voltage Optimization Based on the Auxiliary Problem Principle in Distribution Networks with DERs

This paper addresses the problem of optimizing the voltage profile of radially-operated distribution systems by acting on the active and reactive powers provided by distributed energy resources (DERs). A novel voltage optimization procedure is proposed by adopting a decentralized control strategy. To this aim, a centralized voltage optimization problem (VOP), minimizing the distance of all the nodal voltages from their reference values, is firstly formulated as a strictly-convex quadratic program. Then, the centralized VOP is rewritten by partitioning the network into voltage control zones (VCZs) with pilot nodes. To overcome the lack of strictly convexity determined by the reduction to the pilot nodes, the dual centralized VOP working on the augmented Lagrangian function is reformulated and iteratively solved by the method of multipliers. Finally, a fully-distributed VOP solution is obtained by applying a distributed algorithm based on the auxiliary problem principle, which allows for solving in each VCZ a quadratic programming problem of small dimension and to drive the VCZ solutions toward the overall optimum by an iterative coordination process that requires to exchange among the VCZs only scalar values. The effectiveness and feasibility of the proposed method have been demonstrated via numerical tests on the IEEE 123-bus system

Quality of care provided by Multiple Sclerosis Centers during Covid-19 pandemic: Results of an Italian multicenter patient-centered survey

Background: Covid-19 pandemic impacted on management of people with Multiple Sclerosis (pwMS). Level of satisfaction of pwMS regarding the care received by the staff of Multiple Sclerosis Centers (MSCs) during the pandemic was not fully investigated. In a large patient-centered multicenter study, the therapeutic adherence and quality of care of MSCs was assessed. Methods: In April-May 2021, an online survey was widespread by 16 Italian MSCs. Frequencies, percentages and/or means and standard deviations were calculated to describe the sample. ANOVAs were performed to evaluate the effect of sociodemographic and clinical variables on overall pwMS' rating of MSC assistance. Results: 1670 pwMS completed the survey (67.3% women). During the pandemic, 88% did not change their disease modifying therapy schedule, and 89.1% reached their MSCs with no or little difficulties. Even if only 1.3% of participants underwent a tele-health follow-up visit with their MSC staff, the 80.1% believed that tele-health services should be improved regardless of pandemic. 92% of participants were satisfied of how their MSC took charge of their needs; ANOVAs revealed an effect of disease duration on pwMS' level of satisfaction on MSCs management during the pandemic. Conclusions: The results revealed an efficient MSCs response to Covid-19 pandemic and provided the basis for the implementing of tele-health services that would further improve the taking charge of patients, particularly those with longer disease, higher disability, and/or living far from their MSC

Evaluation of Internal Reference Genes for Quantitative Expression Analysis by Real-Time PCR in Ovine Whole Blood

The use of reference genes is commonly accepted as the most reliable approach to normalize qRT-PCR and to reduce possible errors in the quantification of gene expression. The most suitable reference genes in sheep have been identified for a restricted range of tissues, but no specific data on whole blood are available. The aim of this study was to identify a set of reference genes for normalizing qRT-PCR from ovine whole blood. We designed 11 PCR assays for commonly employed reference genes belonging to various functional classes and then determined their expression stability in whole blood samples from control and disease-stressed sheep. SDHA and YWHAZ were considered the most suitable internal controls as they were stably expressed regardless of disease status according to both geNorm and NormFinder software; furthermore, geNorm indicated SDHA/HPRT, YWHAZ/GAPDH and SDHA/YWHAZ as the best reference gene combinations in control, disease-stressed and combined sheep groups, respectively. Our study provides a validated panel of optimal control genes which may be useful for the identification of genes differentially expressed by qRT-PCR in a readily accessible tissue, with potential for discovering new physiological and disease markers and as a tool to improve production traits (e.g., by identifying expression Quantitative Trait Loci). An additional outcome of the study is a set of intron-spanning primer sequences suitable for gene expression experiments employing SYBR Green chemistry on other ovine tissues and cells

Local site effects and incremental damage of buildings during the 2016 Central Italy earthquake sequence

The Central Italy earthquake sequence initiated on 24 August 2016 with a moment magnitude M6.1 event followed by a M5.9 and a M6.5 earthquake, that caused significant damage and loss of life in the town of Amatrice and other nearby villages and hamlets. The significance of this sequence led to a major international reconnaissance effort to thoroughly examine the effects of this disaster. Specifically, this paper presents evidences of strong local site effects (i.e., amplification of seismic waves due to stratigraphic and topographic effects that leads to damage concentration in certain areas). It also examines the damage patterns observed along the entire sequence of events in association with the spatial distribution of ground motion intensity with emphasis on the clearly distinct performance of reinforced concrete and masonry structures under multiple excitations. The paper concludes with a critical assessment of past retrofit measures efficiency and a series of lessons learned as per the behavior of structures to a sequence of strong earthquake events

Engineering Reconnaissance Following the October 2016 Central Italy Earthquakes - Version 2

Between August and November 2016, three major earthquake events occurred in Central Italy. The first event, with M6.1, took place on 24 August 2016, the second (M5.9) on 26 October, and the third (M6.5) on 30 October 2016. Each event was followed by numerous aftershocks. As shown in Figure 1.1, this earthquake sequence occurred in a gap between two earlier damaging events, the 1997 M6.1 Umbria-Marche earthquake to the north-west and the 2009 M6.1 L’Aquila earthquake to the south-east. This gap had been previously recognized as a zone of elevated risk (GdL INGV sul terremoto di Amatrice, 2016). These events occurred along the spine of the Apennine Mountain range on normal faults and had rake angles ranging from -80 to -100 deg, which corresponds to normal faulting. Each of these events produced substantial damage to local towns and villages. The 24 August event caused massive damages to the following villages: Arquata del Tronto, Accumoli, Amatrice, and Pescara del Tronto. In total, there were 299 fatalities (www.ilgiornale.it), generally from collapses of unreinforced masonry dwellings. The October events caused significant new damage in the villages of Visso, Ussita, and Norcia, although they did not produce fatalities, since the area had largely been evacuated. The NSF-funded Geotechnical Extreme Events Reconnaissance (GEER) association, with co-funding from the B. John Garrick Institute for the Risk Sciences at UCLA and the NSF I/UCRC Center for Unmanned Aircraft Systems (C-UAS) at BYU, mobilized a US-based team to the area in two main phases: (1) following the 24 August event, from early September to early October 2016, and (2) following the October events, between the end of November and the beginning of December 2016. The US team worked in close collaboration with Italian researchers organized under the auspices of the Italian Geotechnical Society, the Italian Center for Seismic Microzonation and its Applications, the Consortium ReLUIS, Centre of Competence of Department of Civil Protection and the DIsaster RECovery Team of Politecnico di Torino. The objective of the Italy-US GEER team was to collect and document perishable data that is essential to advance knowledge of earthquake effects, which ultimately leads to improved procedures for characterization and mitigation of seismic risk. The Italy-US GEER team was multi-disciplinary, with expertise in geology, seismology, geomatics, geotechnical engineering, and structural engineering. The composition of the team was largely the same for the two mobilizations, particularly on the Italian side. Our approach was to combine traditional reconnaissance activities of on-ground recording and mapping of field conditions, with advanced imaging and damage detection routines enabled by state-of-the-art geomatics technology. GEER coordinated its reconnaissance activities with those of the Earthquake Engineering Research Institute (EERI), although the EERI mobilization to the October events was delayed and remains pending as of this writing (April 2017). For the August event reconnaissance, EERI focused on emergency response and recovery, in combination with documenting the effectiveness of public policies related to seismic retrofit. As such, GEER had responsibility for documenting structural damage patterns in addition to geotechnical effects. This report is focused on the reconnaissance activities performed following the October 2016 events. More information about the GEER reconnaissance activities and main findings following the 24 August 2016 event, can be found in GEER (2016). The objective of this document is to provide a summary of our findings, with an emphasis of documentation of data. In general, we do not seek to interpret data, but rather to present it as thoroughly as practical. Moreover, we minimize the presentation of background information already given in GEER (2016), so that the focus is on the effects of the October events. As such, this report and GEER (2016) are inseparable companion documents. Similar to reconnaissance activities following the 24 August 2016 event, the GEER team investigated earthquake effects on slopes, villages, and major infrastructure. Figure 1.2 shows the most strongly affected region and locations described subsequently pertaining to: 1. Surface fault rupture; 2. Recorded ground motions; 3. Landslides and rockfalls; 4. Mud volcanoes; 5. Investigated bridge structures; 6. Villages and hamlets for which mapping of building performance was performed