Amplitude- and phase-resolved nano-spectral imaging of phonon polaritons in hexagonal boron nitride

Phonon polaritons are quasiparticles resulting from strong coupling of photons with optical phonons. Excitation and control of these quasiparticles in 2D materials offer the opportunity to confine and transport light at the nanoscale. Here, we image the phonon polariton (PhP) spectral response in thin hexagonal boron nitride (hBN) crystals as a representative 2D material using amplitude- and phase-resolved near-field interferometry with broadband mid-IR synchrotron radiation. The large spectral bandwidth enables the simultaneous measurement of both out-of-plane (780 cm-1) and in-plane (1370 cm-1) hBN phonon modes. In contrast to the strong and dispersive in-plane mode, the out-of-plane mode PhP response is weak. Measurements of the PhP wavelength reveal a proportional dependence on sample thickness for thin hBN flakes, which can be understood by a general model describing two-dimensional polariton excitation in ultrathin materials

Biomechanical evaluation of combined short segment fixation and augmentation of incomplete osteoporotic burst fractures

Background: Treating traumatic fractures in osteoporosis is challenging. Multiple clinical treatment options are found in literature. Augmentation techniques are promising to reduce treatment-related morbidity. In recent years, there have been an increasing number of reports about extended indication for augmentation techniques. However, biomechanical evaluations of these techniques are limited. Methods: Nine thoracolumbar osteoporotic spinal samples (4 FSU) were harvested from postmortem donors and immediately frozen. Biomechanical testing was performed by a robotic-based spine tester. Standardized incomplete burst fractures were created by a combination of osteotomy-like weakening and high velocity compression using a hydraulic material testing apparatus. Biomechanical measurements were performed on specimens in the following conditions: 1) intact, 2) fractured, 3) bisegmental instrumented, 4) bisegmental instrumented with vertebroplasty (hybrid augmentation, HA) and 5) stand-alone vertebroplasty (VP). The range of motion (RoM), neutral zone (NZ), elastic zone (EZ) and stiffness parameters were determined. Statistical evaluation was performed using Wilcoxon signed-rank test for paired samples (p = 0.05). Results: Significant increases in RoM and in the NZ and EZ (p < 0.005) were observed after fracture production. The RoM was decreased significantly by applying the dorsal bisegmental instrumentation to the fractured specimens (p < 0.005). VP reduced fractured RoM in flexion but was still increased significantly (p < 0.05) above intact kinematic values. NZ stiffness (p < 0.05) and EZ stiffness (p < 0.01) was increased by VP but remained lower than prefracture values. The combination of short segment instrumentation and vertebroplasty (HA) showed no significant changes in RoM and stiffness in NZ in comparison to the instrumented group, except for significant increase of EZ stiffness in flexion (p < 0.05). Conclusions: Stand-alone vertebroplasty (VP) showed some degree of support of the anterior column but was accompanied by persistent traumatic instability. Therefore, we would advocate against using VP as a stand-alone procedure in traumatic fractures. HA did not increase primary stability of short segment instrumentation. Some additional support of anterior column and changes of kinematic values of the EZ may lead one to suppose that additive augmentation may reduce the load of dorsal implants and possibly reduce the risk of implant failure.<br

Experimentally induced incomplete burst fractures - a novel technique for calf and human specimens

Background: Fracture morphology is crucial for the clinical decision-making process preceding spinal fracture treatment. The presented experimental approach was designed in order to ensure reproducibility of induced fracture morphology. Results: The presented method resulted in fracture morphology, found in clinical classification systems like the Magerl classification. In the calf spine samples, 70% displayed incomplete burst fractures corresponding to type A3.1 and A3.2 fractures. In all human samples, superior incomplete burst fractures (Magerl A3.1) were identified by an independent radiologist and spine surgeon. Conclusions: The presented set up enables the first experimental means to reliably model and study distinct incomplete burst fracture patterns in an in vitro setting. Thus, we envisage this protocol to facilitate further studies on spine fracture treatment of incomplete burst fractures

Phase transition in bulk single crystals and thin films of VO2 by nanoscale infrared spectroscopy and imaging

We have systematically studied a variety of vanadium dioxide (VO2) crystalline forms, including bulk single crystals and oriented thin films, using infrared (IR) near-field spectroscopic imaging techniques. By measuring the IR spectroscopic responses of electrons and phonons in VO2 with sub-grain-size spatial resolution (∼20nm), we show that epitaxial strain in VO2 thin films not only triggers spontaneous local phase separations, but also leads to intermediate electronic and lattice states that are intrinsically different from those found in bulk. Generalized rules of strain- and symmetry-dependent mesoscopic phase inhomogeneity are also discussed. These results set the stage for a comprehensive understanding of complex energy landscapes that may not be readily determined by macroscopic approaches

Postglacial evolution of Lake Constance: sedimentological and geochemical evidence from a deep-basin sediment core

The modern, over 250-m-deep basin of Lake Constance represents the underfilled northern part of an over 400-m-deep, glacially overdeepened trough, which reaches well into the Alps at its southern end. The overdeep- ening was formed by repeated glacial advance-retreat cycles of the Rhine Glacier throughout the Middle to Late Pleistocene. A seismic survey of Lake Constance revealed a Quaternary sediment fill of more than 150 m thickness representing at least the last glacial cycle. The stratified sedimentary fill consists at the base of ice-contact deposits on top of the molasse bedrock, overlain by glaciolacustrine to lacustrine sediments. During the successful field test of a newly developed, mid-size coring system ("HIPERCORIG"), the longest core (HIBO19) ever taken in Lake Constance was retrieved with an overall length of 24 m. The sediments recovered consist of a nearly continuous succession of lacustrine silts and sands including more than 12 m of Late Glacial sediment at the base. 14 lithotypes were identified through petrophysical and geochemical analyses. In combination with a 14C- and OSL-based age-depth model, the core was divided into three main chronostratigraphic units. The basal age of ~ 13.7 ka BP dates the base of the succes- sion back to the Bølling-Allerød interstadial, with overlying strata representing a complete and thick Younger-Dryas to Holocene succession. The sediments offer a high-resolution insight into the evolution of paleo-Lake Constance from a cold, postglacial to a more productive and warmer Holocene lake. The Late Glacial succession is dominated by massive, m-thick sand beds reflecting episodic sedimentation pulses. They are most likely linked to a subaquatic channel system originating in the river Seefelder Aach, which is, despite the Holocene drape, still apparent in today’s lake bathymetry. The overlying Holocene succession reveals a prominent, several cm-thick, double-turbiditic event layer representing the most distal impact of the Flimser Bergsturz, the largest known rockslide of the Alps that occurred over 100 km upstream the river Rhine at ~ 9.5 ka BP. Furthermore, lithologic variations in the Holocene succession document the varying sediment loads of the river Rhine and the endogenic production representing a multitude of environmental changes

Functional body composition and related aspects in research on obesity and cachexia: report on the 12th Stock Conference held on 6 and 7 September 2013 in Hamburg, Germany

The 12th Stock Conference addressed body composition and related functions in two extreme situations, obesity and cancer cachexia. The concept of ‘functional body composition’ integrates body components into regulatory systems relating the mass of organs and tissues to corresponding in vivo functions and metabolic processes. This concept adds to an understanding of organ/tissue mass and function in the context of metabolic adaptations to weight change and disease. During weight gain and loss, there are associated changes in individual body components while the relationships between organ and tissue mass are fixed. Thus an understanding of body weight regulation involves an examination of the relationships between organs and tissues rather than individual organ and tissue masses only. The between organ/tissue mass relationships are associated with and explained by crosstalks between organs and tissues mediated by cytokines, hormones and metabolites that are coupled with changes in body weight, composition and function as observed in obesity and cancer cachexia. In addition to established roles in intermediary metabolism, cell function and inflammation, organ-tissue crosstalk mediators are determinants of body composition and its change with weight gain and loss. The 12th Stock Conference supported Michael Stocks' concept of gaining new insights by integrating research ideas from obesity and cancer cachexia. The conference presentations provide an in-depth understanding of body composition and metabolism

Phase coexistence and electric-field control of toroidal order in oxide superlattices

Systems that exhibit phase competition, order parameter coexistence, and emergent order parameter topologies constitute a major part of modern condensed-matter physics. Here, by applying a range of characterization techniques, and simulations, we observe that in PbTiO>3/SrTiO>3 superlattices all of these effects can be found. By exploring superlattice period-, temperature- and field-dependent evolution of these structures, we observe several new features. First, it is possible to engineer phase coexistence mediated by a first-order phase transition between an emergent, low-temperature vortex phase with electric toroidal order and a high-temperature ferroelectric a>1/a>2 phase. At room temperature, the coexisting vortex and ferroelectric phases form a mesoscale, fibre-textured hierarchical superstructure. The vortex phase possesses an axial polarization, set by the net polarization of the surrounding ferroelectric domains, such that it possesses a multi-order-parameter state and belongs to a class of gyrotropic electrotoroidal compounds. Finally, application of electric fields to this mixed-phase system permits interconversion between the vortex and the ferroelectric phases concomitant with order-of-magnitude changes in piezoelectric and nonlinear optical responses. Our findings suggest new cross-coupled functionalities.A.R.D. acknowledges support from the Army Research Office under grant W911NF-14-1-0104 and the Department of Energy, Office of Science, Office of Basic Energy Sciences under grant no. DE-SC0012375 for synthesis and structural study of the materials. Z.H. acknowledges support from NSF-MRSEC grant number DMR-1420620 and NSF-MWN grant number DMR-1210588. A.K.Y. acknowledges support from the Office of Basic Energy Sciences, US Department of Energy DE-AC02-05CH11231. C.T.N. acknowledge support from the Office of Basic Energy Sciences, US Department of Energy DE-AC02-05CH11231. S.L.H. acknowledges support from the National Science Foundation under the MRSEC programme (DMR-1420620). M.R.M. acknowledges support from the National Science Foundation Graduate Research Fellowship under grant number DGE-1106400. K.-D.P., V.K. and M.B.R. acknowledge support from the US Department of Energy, Office of Basic Sciences, Division of Material Sciences and Engineering, under Award No. DE-SC0008807. A.F. acknowledges support from the Swiss National Science Foundation. P.G.-F. and J.J. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through grant number FIS2015-64886-C5-2-P. J.I. is supported by the Luxembourg National Research Fund (Grant FNR/C15/MS/10458889 NEWALLS). L.-Q.C. is supported by the US Department of Energy, Office of Basic Energy Sciences under Award FG02-07ER46417. R.R. and L.W.M. acknowledge support from the Gordon and Betty Moore Foundation’s EPiQS Initiative, under grant GBMF5307. The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the US Department of Energy under Contract No. DE-C02-05CH11231. Nanodiffraction measurements were supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division. This research used resources of the Advanced Photon Source, a US Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. Electron microscopy of superlattice structures was performed at the Molecular Foundry at Lawrence Berkeley National Laboratory, supported by the Office of Science, Office of Basic Energy Sciences, US Department of Energy (DE-AC02-05CH11231).Peer Reviewe

Evidence-Based Recommendations for Local Antimicrobial Strategies and Dead Space Management in Fracture-Related Infection

Summary:Fracture-related infection (FRI) remains a challenging complication that imposes a heavy burden on orthopaedic trauma patients. The surgical management eradicates the local infectious focus and if necessary facilitates bone healing. Treatment success is associated with debridement of all dead and poorly vascularized tissue. However, debridement is often associated with the formation of a dead space, which provides an ideal environment for bacteria and is a potential site for recurrent infection. Dead space management is therefore of critical importance. For this reason, the use of locally delivered antimicrobials has gained attention not only for local antimicrobial activity but also for dead space management. Local antimicrobial therapy has been widely studied in periprosthetic joint infection, without addressing the specific problems of FRI. Furthermore, the literature presents a wide array of methods and guidelines with respect to the use of local antimicrobials. The present review describes the scientific evidence related to dead space management with a focus on the currently available local antimicrobial strategies in the management of FRI.Level of Evidence:Therapeutic Level V. See Instructions for Authors for a complete description of levels of evidence