Design of narrowband tunable filter for LTE Band 5

The objective of this project is to design and develop a tunable bandpass filter for LTE Band 5 that work within the frequency range of 869 MHZ - 894 MHz. The filter characteristic that being tuned in this design is the center frequency while the bandwidth remains the same. The tunability of the design is electronically controlled by adjusting the capacitance value in the filter network. The design is being constrict by the currently available lumped element component in the market. The design methodology of the tunable filter are being introduced in this project. Several thesis and article regarding RF microwave filter design are reviewed before coming up with the methodology for the design

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Performance of solvent-borne intumescent fire protective coating with Palm oil clinker as novel bio-filler on steel

This research deals with contribution of hybrid fillers with palm oil clinker (POC) as a novel bio-filler in solvent-borne intumescent fire protective coating for steel. The hybrid fillers with POC were mixed in appropriate amount of additives and acrylic binder to produce the intumescent coatings. The intumescent coatings were characterized by using Bunsen burner test, surface spread of flame, thermogravimetric analysis, field emission scanning electron microscopy, static immersion and Instron micro tester equipment. Specimen with POC as a single filler has significantly enhanced the fire protection performances of the intumescent coating due to the high thermal stability of POC, where less than 10% of temperature different when compared to specimens with hybrid fillers. From the flame spread classification, class 1 is the best classification while Class 4 is the worst and considered high risk. All specimens was classified as class 1 since the final spread of flame was less than 165 mm. For hybrid fillers composition, specimen consist of POC/Al(OH)3/TiO2 has significantly improved the water resistance of the coating due to the low solubility of Al(OH)3 in water, while specimen contain of Mg(OH)2 had higher mechanical strength due to the strong bonding between the metal surface and acrylic binder/Mg(OH)2 filler. It was found that coating with the incorporation of all hybrid fillers gives excellent fire protection performance with good thermal stability, water resistance and mechanical properties. It can be concluded that, the selection of appropriate composition of fillers and binder in intumescent coating was highly influence the intumescent coating performance.</p

Evidence-based practice among a group of Malaysian dental practitioners.

The objective of this study was to assess dentists' knowledge and use of evidence-based practice (EBP), including their attitudes toward and perceptions of barriers that limit the use of EBP. A cross-sectional survey was used with self-administered questionnaires involving dental practitioners in the state of Selangor, Malaysia. One hundred ninety-three replies were returned, for a response rate of 50.3 percent. More than two-thirds (135/193, 69.9 percent) of the respondents had heard of EBP. Out of the 135 respondents who had heard of EBP, a majority agreed it was a decision-making process based on evidence (127/135, 94.2 percent) and involved a series of steps from formulating the research question, locating and assessing the evidence, to applying it if suitable (129/135, 95.6 percent). Out of the 135 respondents who had heard of EBP, a high percentage agreed that EBP improved their knowledge and skills (132/135, 97.8 percent) and treatment quality (132/135, 97.8 percent). For advice, a majority of the 135 respondents frequently consulted friends and colleagues (123/135, 91.1 percent), made referrals (120/135, 88.9 percent), consulted textbooks (112/135, 83.0 percent), and referred to electronic databases (90/135, 66.7 percent). Out of the 135 respondents, many perceived EBP as very important (59/135, 43.7 percent) and important (58/135, 43.0 percent) and were interested to learn further information about EBP (132/135, 97.8 percent). The main reported barriers were lack of time (87/135, 64.4 percent), financial constraints (54/135, 40.0 percent), and lack of knowledge (38/135, 28.1 percent). A majority of the 135 respondents had knowledge of and positive attitudes towards EBP. However, due to barriers, a majority of them preferred colleagues, textbooks, and referrals for advice instead of seeking evidence from electronic databases

Challenges in culturing macaca fascicularisBone marrow stem cells

Culturing Macaca fascicularis bone marrow stem cells in fetal bovine serum (FBS) resulted in low proliferation and long period of incubation. Therefore, its potential uses are exhausted. Here we report the establishment of culturing the Macaca fascicularis bone marrow stem cells using the FBS in combination with autologous serum. Five percent autologous serum was added to the Minimum Essential Medium (MEM) alpha medium and 10% FBS while 0.2 mM acid ascorbic 2-phosphate, 10 mM β-glycerolphosphate, 10-8 molar dexamethasone were used for osteogenic induction. Following this combination, our results showed higher growth kinetic i.e. 1.41% growth rate higher compared to only 0.46% growth rates of the cells using FBS alone and shorter population doubling time (4 to 7 days) compared to the culture without the combination of FBS and autologous serum (30 days). Thus, the combination of the FBS and autologous serum permits fast cell growth and tissue construction

Fabrication and Characterization of Graphene-on-Silicon Schottky Diode for Advanced Power Electronic Design

In this study, graphene-on-silicon process technology was developed to fabricate a power rectifier Schottky diode for efficiency improvement in high operating temperature. Trench-MOS-Barrier-Schottky (TMBS) diode structure was used to enhance the device performance. The main objective of this research was to study the effect of reduced graphene oxide (RGO) deposited on silicon surface for Schottky barrier formation and heat transfer in Schottky junction. The study showed RGO deposited on silicon as a heat spreader could help to reduce the effect of heat generated in the Schottky junction that leads to a leakage current reduction and efficiency improvement in the device. With comparison to the conventional metal silicide (titanium silicide and cobalt silicide), the leakage reduced by two-orders of magnitude when tested under high operating temperature (>100°C). TMBS rectifier diode that uses graphene-based heat spreader could produce highly reliable product able to withstand high temperature operating condition