Submarine mass movements around the Iberian Peninsula. The building of continental margins through hazardous processes

Submarine mass movements, such as those which occur in all environments in every ocean of the world, are widely distributed across the Iberian continental margins. A lack of consistent data from various areas around the Iberian Peninsula makes it difficult to precisely understand their role in the sedimentary record. However, all the studies carried out over the past two decades reveal that they are a recurrent and widespread sedimentary process that may represent a significant geohazard. The majority of submarine mass movements observed in both the Mediterranean and Atlantic margins of the Iberian Peninsula have been generically identified as Mass Transport Deposits, but debris flows, slides, slumps and turbidites are common. Only a few remarkable examples involve huge volumes of sediment covering large areas (such as ~500 km3 and ~6x104 km2 ), but more moderate deposits (<200 km2 ) are frequently found on the seafloor or embedded in the sedimentary sequences, building margins and basins

Large sediment waves on the Gulf of Valencia continental margin (NW Mediterranean): internal structure and evolution

Several fields of sediment waves have been recently observed over the Gulf of Valencia (NW Mediterranean) continental margin. Based on their morphology and internal structure, two different sets of sediment waves can be distinguished. Large sediment waves with 500 to 1000m wavelengths and 2 to 50m wave height are developed on the foreset region of the prograding margin clinoform, being found from 250 to 850m water depth. Additionally, over the outer shelf region, a second group of sediment waves also develops; displaying wavelengths in between 400 m and 800m and heights of 2 to 4m. Eustatic cycles control the development of the sediment waves on the outer continental shelf, which show several erosional truncations and growing stages. However, the sediment waves over the continental slope region seem to continuously evolve through time, at least since the Early/Lower Pliocene, without being affected by sea level changes

Slope Instability along the northeastern Iberian and Balearic continental margins

This paper gathers the available information on submarine landslides identified in the northeastern Iberian continental margin and presents new data on both already known landslides and new, previously unknown ones. The 2,000 km2, 26 km3 resulting deposit of the BIG’95 debris flow in the Ebro margin; the 4 up to 16 km2, 0.4 km3 Eivissa slides in the Eivissa Channel; the 2 up to 65.6 km2, 1.46 km3 Barcelona slides in the shallow southern Catalan margin; and the western Gulf of Lions debris flow in the deep north Catalan margin are presented. This compilation is completed with several other previously undescribed small-scale mass-wasting deposits together with those observed in the Balearic Promontory. The amount and widespreading of submarine landslide deposits in the northern Iberian margins demonstrate that these margins are not an exception to the common occurence of these kind of structures worldwide, and gives an idea on this phenomena recurrence even in margins considered moderately quiet, in terms of seismicit

Transient erosion in the Valencia Trough turbidite systems, NW Mediterranean Basin

Submarine canyons can efficiently drain sediments from continental margins just as river systems do in subaerial catchments. Like in river systems, submarine canyons are often arranged as complex drainage networks that evolve from patterns of erosion and deposition. In the present paper we use a morphometric analysis of submarine canyon-channel long-profiles to study the recent sedimentary history of the Valencia Trough turbidite system (VTTS) in the NW Mediterranean Sea. The VTTS is unique in that it drains sediment from margins with contrasting morphologies through a single "trunk" conduit, the Valencia Channel. The Valencia Channel has been active since the late Miocene, evolving in response to Plio-Quaternary episodes of erosion and deposition. The integrated analysis of long-profiles obtained from high-resolution bathymetric data across the entire turbidite system shows evidence for transient canyon incision in the form of knickpoints and hanging tributaries. Multiple factors appear to have triggered these periods of incision. These include a large debris flow at 11,500 yr BP that disrupted the upper reaches of the VTTS and glacio-eustatic lowstands that forced shifting of sediment input to the VTTS. Based on these inferences, long-term time-averaged incision rates for the Valencia Channel have been estimated. The evidence we present strongly suggests that Foix Canyon has played a key role in the drainage dynamics of the VTTS in the past. This study builds conceptually on a recent modeling study that provides a morphodynamic explanation for the long-term evolution of submarine canyon thalweg profiles. The procedure and results from this work are of potential application to other submarine sediment drainage systems, past and present, including those containing mid-ocean type valleys like the Valencia Channel

Geomorphology and development of a high-latitude channel system: the INBIS channel case (NW Barents Sea, Arctic)

This is a post-peer-review, pre-copyedit version of an article published in Arktos. The final authenticated version is available online at: http://dx.doi.org/https://doi.org/10.1007/s41063-019-00065-9 .The INBIS (Interfan Bear Island and Storfjorden) channel system is a rare example of a deep-sea channel on a glaciated margin. The system is located between two trough mouth fans (TMFs) on the continental slope of the NW Barents Sea: the Bear Island and the Storfjorden–Kveithola TMFs. New bathymetric data in the upper part of this channel system show a series of gullies that incise the shelf break and minor tributary channels on the upper part of the continental slope. These gullies and channels appear far more developed than those on the rest of the NW Barents Sea margin, increasing in size downslope and eventually merging into the INBIS channel. Morphological evidence suggests that the Northern part of the INBIS channel system preserved its original morphology over the last glacial maximum (LGM), whereas the Southern part experienced the emplacement of mass transport glacigenic debris that obliterated the original morphology. Radiometric analyses were applied on two sediment cores to estimate the recent (~ 110 years) sedimentation rates. Furthermore, analysis of grain size characteristics and sediment composition of two cores shows evidence of turbidity currents. We associate these turbidity currents with density-driven plumes, linked to the release of meltwater at the ice-sheet grounding line, cascading down the slope. This type of density current would contribute to the erosion and/ or preservation of the gullies’ morphologies during the present interglacial. We infer that Bear Island and the shallow morphology around it prevented the flow of ice streams to the shelf edge in this area, working as a pin (fastener) for the surrounding ice and allowing for the development of the INBIS channel system on the inter-ice stream part of the slope. The INBIS channel system was protected from the burial by high rates of ice-stream derived sedimentation and only partially affected by the local emplacement of glacial debris, which instead dominated on the neighbouring TMF systems

A tribute to Marie Tharp: Mapping the seafloor of back-arc basins, mid-ocean ridges, continental margins and plate boundaries

European Geosciences Union (EGU) General Assembly 2020, 4-8 May 2020Marie Tharp (1920-2006) was a pioneer of modern oceanography. She was an American geologist and oceanographic cartographer who, together with his husband Bruce Heezen, generated the first bathymetric map of the Atlantic Ocean floor. Tharp's work revealed the detailed topography and geological landscape of the seafloor. Her work revealed the presence of a continuous rift valley along the Mid-Atlantic Ridge axis, causing a paradigm in earth sciences that led to the acceptance of plate tectonics and continental drift theories. Piecing maps together in the late 1940s and early 1950s, Marie and his partner Bruce Heezen discovered the 75.000 km underwater ridge bounding around the globe. By this finding, they laid the conclusion from geophysical data that the seafloor spreads from mid-ocean ridges and that continents are in motion with respect to one another¿a revolutionary geological theory at that time. Many years later, satellite images demonstrate that Tharp¿s maps were accurate. In this contribution, we focus on detailed bathymetric maps collected from year 1992 to today, which include bathymetric maps from diverse parts of the world. For instance, we will show a) Back-arc basins (i.e. the Bransfield Basin, Antarctica; and the North Fiji Basin, SW Pacific); b) Mid-ocean ridges and fracture zones (i.e. the MAR at the South of Azores, the MAR at the Oceanographer-Hayes, and the St. Paul Fracture Zone at the Equator), and c) Active tectonic structures from the Gulf of Cadiz and Alboran Sea, located at the Africa-Eurasia plate boundary (Gibraltar Arc). Regarding this last area, we will characterize the seafloor expression of the fault systems, as well as the subsurface structure of the faults in the Gulf of Cadiz and Alboran Sea. This zone is characterized by a moderate seismicity, mainly reverse and strike-slip focal mechanisms; although large historical (AD1755, AD1829) and instrumental earthquakes or large/great magnitude also occurred, such as the earthquakes of 1969, 1994, 2004 and 2016. In addition, the Gulf of Cadiz-Alboran Sea area is compartmentalized in different crustal domains, bounded by active strike-slip fault systems. We adopted a multi-scale approach, including morphological analysis of shipboard multibeam bathymetry, near-bottom bathymetry obtained with Autonomous Underwater Vehicles (AUVs) at a resolution of 1-2 m, and medium to deep penetration multi-channel seismic (MCS) data. Finally, we will also show a couple of videos from recent marine cruises in the Gibraltar Arc (SHAKE-2015 and INSIGHT-2018), both using state-of-the-art high-resolution marine technologie

A simple and efficient GIS tool for volume calculations of submarine landslides

A numeric tool is presented for calculating volumes of topographic voids such as slump scars of landslides, canyons or craters (negative/concave morphology), or alternatively, bumps and hills (positive/convex morphology) by means of digital elevation models embedded within a geographical information system (GIS). In this study, it has been used to calculate landslide volumes. The basic idea is that a (singular) event (landslide, meteorite impact, volcanic eruption) has disturbed an intact surface such that it is still possible to distinguish between the former (undisturbed) landscape and the disturbance (crater, slide scar, debris avalanche). In such cases, it is possible to reconstruct the paleo-surface and to calculate the volume difference between both surfaces, thereby approximating the volume gain or loss caused by the event. I tested the approach using synthetically generated land surfaces that were created on the basis of Shuttle Radar Topography Mission data. Also, I show the application to two real cases, (1) the calculation of the volume of the Masaya Slide, a submarine landslide on the Pacific continental slope of Nicaragua, and (2) the calculation of the void of a segment of the Fish River Canyon, Namibia. The tool is provided as a script file for the free GIS GRASS. It performs with little effort, and offers a range of interpolation parameters. Testing with different sets of interpolation parameters results in a small range of uncertainty. This tool should prove useful in surface studies not exclusively on earth

Fracture and damage localization in volcanic edifice rocks from El Hierro, Stromboli and Tenerife

© 2018 The Author(s). We present elastic wave velocity and strength data from a suite of three volcanic rocks taken from the volcanic edifices of El Hierro and Tenerife (Canary Islands, Spain), and Stromboli (Aeolian Islands, Italy). These rocks span a range of porosity and are taken from volcanoes that suffer from edifice instability. We measure elastic wave velocities at known incident angles to the generated through-going fault as a function of imposed strain, and examine the effect of the damage zone on P-wave velocity. Such data are important as field measurements of elastic wave tomography are key tools for understanding volcanic regions, yet hidden fractures are likely to have a significant effect on elastic wave velocity. We then use elastic wave velocity evolution to calculate concomitant crack density evolution which ranges from 0 to 0.17: highest values were correlated to the damage zone in rocks with the highest initial porosity