Fabrication of thin film composite poly(amide)-carbon-nanotube supported membranes for enhanced performance in osmotically driven desalination systems

The search for lower energy consumption desalination systems has been driving research in the past decade towards the investigation of osmotically driven membrane processes, such as forward osmosis (FO) or osmotic distillation (OD). Despite similarities with reverse osmosis (RO) membranes, thin film composite (TFC) for FO membranes require careful design to reduce salt concentration polarization formation within the large pores composing the supporting layer. An investigation of a novel, highly stable, robust support made solely of carbon nanotubes (CNTs), which could find applications in both RO and FO was undertaken. TFC membranes were fabricated by interfacially polymerizing for the first time a dense poly(amide) (PA) layer on self-supporting bucky-papers (BPs) made of hydroxyl-functionalized entangled CNTs. These hydrophilic supports exhibited low contact angle with water (90%), making it a promising material when compared with poly(sulfone) (PSf), the traditional polymer used to fabricate TFC membrane supports in RO. In addition, the impact of the support hydrophilicity on the stability of the interfacially polymerized film and on water adsorption was investigated by oxygen-plasma treating various potential support materials, exhibiting similar geometrical properties. The morphology and salt diffusion of both CNT BP and PSf supports were investigated, and the novel BP–PA composite membranes were found to be superior to commercially available TFC membranes

Towards Enhanced Performance Thin-film Composite Membranes via Surface Plasma Modification

Advancing the design of thin-film composite membrane surfaces is one of the most promising pathways to deal with treating varying water qualities and increase their long-term stability and permeability. Although plasma technologies have been explored for surface modification of bulk micro and ultrafiltration membrane materials, the modification of thin film composite membranes is yet to be systematically investigated. Here, the performance of commercial thin-film composite desalination membranes has been significantly enhanced by rapid and facile, low pressure, argon plasma activation. Pressure driven water desalination tests showed that at low power density, flux was improved by 22% without compromising salt rejection. Various plasma durations and excitation powers have been systematically evaluated to assess the impact of plasma glow reactions on the physico-chemical properties of these materials associated with permeability. With increasing power density, plasma treatment enhanced the hydrophilicity of the surfaces, where water contact angles decreasing by 70% were strongly correlated with increased negative charge and smooth uniform surface morphology. These results highlight a versatile chemical modification technique for post-treatment of commercial membrane products that provides uniform morphology and chemically altered surface properties

Effect of Cold Pressor Test on the Internal Diameter of the Radial Artery

The aim of this study was to investigate in normal subjects the effect of a cold pressor test on the caliber of the radial artery, a muscular artery of medium size. The internal diameter of this artery was measured continuously using a recently developed ultrasonic device. Immersion of one hand in ice water for two minutes increased blood pressure from 115/75 ± 3/2 (Mean±SEM) to 136/90 ± 6/2 mm Hg (P <.001) and decreased the internal diameter of the radial artery from 2.82 ± 0.12 to 2.60 ± 0.09 mm ( P <.01). These data therefore indicate that the vasoconstriction induced by the cold pressor test involves not only arterioles, but also medium-size arteries. Am J Hypertens 1989; 2:727-72

HIV-1 Subtype distribution in morocco based on national sentinel surveillance data 2004-2005

<p>Abstract</p> <p>Background</p> <p>Little is known about HIV-1 subtype distribution in Morocco. Some data suggest an emergence of new HIV subtypes. We conducted phylogenetic analysis on a nationally representative sample of 60 HIV-1 viral specimens collected during 2004-2005 through the Morocco national HIV sentinel surveillance survey.</p> <p>Results</p> <p>While subtype B is still the most prevalent, 23.3% of samples represented non-B subtypes, the majority of which were classified as CRF02_AG (15%). Molecular clock analysis confirmed that the initial introduction of HIV-1B in Morocco probably came from Europe in the early 1980s. In contrast, the CRF02_AG strain appeared to be introduced from sub-Saharan Africa in two separate events in the 1990s.</p> <p>Conclusions</p> <p>Subtype CRF02_AG has been emerging in Morocco since the 1990s. More information about the factors introducing HIV subtype-specific transmission will inform the prevention strategy in the region.</p

Rhinoplasty. The Difficult Nasal Tip: Total Resection of the Alar Cartilages

There are many ways to reconstruct and make nasal tips more attractive. Sometimes we cannot find the best way unless we at least remove all surplus from the tip. This may occur in primary or secondary rhinoplasty. In principle, anything is possible when relocating and reconstructing. However, sometimes we face reality when we uncover the tip: broken or bulging cartilages that are difficult to put right. For this reason, in 1987 we thought of totally resectioning the alar cartilages in a case of secondary rhinoplasty with an unsightly appearance. After a year the result was seen to be correct from an aesthetic and a functional perspective and is still so today. Aesthetically, it kept its shape and did not collapse with nasal respiratory failure. We covered the end of the crus medialis with a small, temporary, one- to two-layered fascia patch. Except in exceptional cases, we now use this procedure: Total sectioning of the alar cartilages including the domes, or maintenance of them by preserving the fibroadipose tip tissue with a suture in the middle of the end of the crus medialis and by covering this with temporary fascia, which usually has two layers depending on the thickness of the skin of the tip. This procedure is indicated mainly in secondary rhinoplasty when the cartilages of the tip are completely destroyed, and in primary rhinoplasty when the tip is excessively wide and bulbous. Our philosophy is, therefore, elegance and beauty of the nasal tip with a solid and equilateral base without prejudices

Strontium as a tracer of weathering processes in a silicate catchment polluted by acid atmospheric inputs, Strengbach, France

This paper determines the weathering and atmospheric contributions of Ca in surface water from a small spruce forested silicate catchment (N–E France) receiving acid atmospheric inputs. The bedrock is a granite with K-feldspar and albite as dominant phases. The calcium content in plagioclase is low and the Ca/Na ratio in surface water is high, reflecting other sources of calcium from those expected from the weathering of major mineral phases. The biotite content is low. Only traces of apatite were detected while no calcite was found in spite of a major hydrothermal event having affected the granite. The strontium isotopic ratio 87Sr/86Sr and Sr content was used as a tracer of weathering and was determined in minerals and bulk bedrock, open field precipitation, throughfall, soil solution, spring and stream water. The Sr isotopic ratio of the reacting weathering end-member was predicted by simulating the alteration of the granite minerals by incorporating strontium into the water–rock interaction kinetic code KINDIS. In the early stages of water–rock interaction, K-feldspar and biotite strongly influence the isotopic composition of the weathering solution whereas, the Na-rich plagioclase appears to be the main long-term reactive weathering end-member. Approximately 50% of dissolved Sr in streamwater are atmospherically derived. The 87Sr/86Sr ratios of exchangeable Sr in the fine fraction at 1-m depth from a soil profile indicate that the amount of exchangeable Sr seems essentially controlled by atmospheric inputs. The exception is the deep saprolite where weathering processes could supply the Sr (and Ca). Na-Plagioclase weathering obviously control the chemistry and the isotopic composition of surface waters. The weathering of trace mineral plays a secondary role, the exception is for apatite when plagioclase is absent. Our hydrochemical, mineralogical and isotopic investigations show that a major part of the strong Ca losses detected in catchment hydrochemical budgets that result from the neutralization of acid precipitation has an atmospheric origin. Consequently, in the long term, in such areas, the availability of such an exchangeable base cation might be strongly limited and surface waters consequently acidified

The CMS conductor

The Compact Muon Solenoid (CMS) is one of the experiments, which are being designed in the framework of the Large Hadron Collider (LHC) project at CERN, the design field of the CMS magnet is 4 T, the magnetic length is 13 m and the aperture is 6 m. This high magnetic field is achieved by means of a 4 layer, 5 modules superconducting coil. The coil is wound from an Al-stabilized Rutherford type conductor. The nominal current of the magnet is 20 kA at 4.5 K. In the CMS coil the structural function is ensured, unlike in other existing Al-stabilized thin solenoids, both by the Al-alloy reinforced conductor and the external former. In this paper the retained manufacturing process of the 50-km long reinforced conductor is described. In general the Rutherford type cable is surrounded by high purity aluminium in a continuous co-extrusion process to produce the Insert. Thereafter the reinforcement is joined by Electron Beam Welding to the pure Al of the insert, before being machined to the final dimensions. During the manufacture the bond quality between the Rutherford cable and the high purity aluminium as well as the quality of the EB welding are continuously controlled by a novel ultrasonic phased array system. The dimensions of the insert and the final conductor are measured by laser micrometer. (8 refs)

The purpose of United Nations Security Council practice: Contesting competence claims in the normative context created by the Responsibility to Protect.

Practice theory provides important insight into the workings of the Security Council. The contribution is currently limited however by the conjecture that practice theory operates on ‘a different analytical plane’ to norm / normative theory (Adler-Nissen and Pouliot 2014). Building on existing critiques (Duval and Chowdhury 2011; Schindler and Wille 2015) we argue that analyzing practices separately from normative positions risks misappropriating competence and reifying practice that is not fit for purpose. This risk is realized in Adler-Nissen and Pouliot’s (2014) practice based account Libya crisis. By returning the normative context created by the Responsibility to Protect (R2P) to the analytical foreground, and by drawing on a pragmatic conception of 'ethical competence' (Frost 2009), we find that pre-reflexive practices uncritically accepted as markers of competence – e.g. ‘penholding’ – can contribute to the Council’s failure to act collectively in the face of mass atrocity. Drawing on extensive interview material we offer an alternative account of the Libya intervention, finding that the practices of the permanent three (France, UK and US) did not cultivate the kind of collective consciousness that is required to implement R2P. This is further illustrated by an account of the Security Council’s failure in Syria, where the P3’s insistence on regime change instrumentalized the Council at the expense of R2P-appropriate practice. This changed when elected members became ‘penholders’. Practice theory can facilitate learning processes that help the Council meet its responsibilities, but only through an approach that combines its insights with those of norm / normative theory