605 research outputs found
Electron emission at very low electron impact energy: experimental and Monte-Carlo results
The behaviour of electron emission under electron impact at very low energy
is of great importance in many applications such as high energy physics,
satellites, nuclear reactors, etc. However the question of the total electron
reflectivity is still in discussion. Our experimental and theoretical studies
show that the total reflectivity at very low energy is far from being an
obvious fact. Moreover, our results show that the yield is close to zero and
not equal to one for low energy incident electron.Comment: 3 pages, contribution to the Joint INFN-CERN-EuCARD-AccNet Workshop
on Electron-Cloud Effects: ECLOUD'12; 5-9 Jun 2012, La Biodola, Isola d'Elba,
Italy; CERN Yellow Report CERN-2013-002, pp.137-13
Robust badlands thalwegs network extraction from DTM for topological characterisation
International audienceThis paper presents methods to extract badlands thalwegs network from regular grid DTM by combining a terrain morphology indices to a drainage algorithm. The computation of a continuous vector network will permit the study of the badlands spatial patterns. Thess methods aim at delineating a thalweg only where the DTM denotes a significant curvature with respect to DTM accuracy. It relies on three major steps. Firstly, discontinuous concave areas are detected from the DTM using morphological criteria; the plan curvature and the convergence index . Secondly, the concave convergence areas are connected using a drainage algorithm which provides continuous and tree-structured thick scheme. We assume that these areas present physical significance and corresponds to a gully floor area. Finally, the thick path is reduced to its main curve and vectorised to obtain a thalwegs network. The methods are applied on both virtual and actual cases DTM. The actual case is a LiDAR DTM of Draix Badlands (French Alps). The obtained networks are quantitatively compared both to the one obtained with usual drainage area criteria and to a reference network. The networks comparison shows the great potential of the converge index based method for thalweg network extraction
A hierarchical graph matching method to assess accuracy of network extraction from DTM
International audienceMore and more elevation data and methods are available to automatically map hydrographic or thalweg networks. However, there are few methods to assess the network quality. The most used method to compare an extracted network to a reference network gives global quality information on only geographic criterion. The method proposed in this paper allows a network assessment compared to a reference network whose results can be interpreted more easily and more related to networks morphologies. This method is based on a hierarchical node matching within a graph. Nodes are classified by hierarchical level according to their importance in the tree-structured network. Then, a matching process seeks for nodes pairs between the two networks based on the geographic distance. The hierarchy introduces a priority order in the matching. The relative location of nodes pairs is checked in order to ensure a topological consistency. Finally, similarity statistics based on nodes matching counts are computed. While the usual method only takes into account a geographic criterion, the presented method integrates geographic, geometric and topologic criteria. It is an interactive and object-by-object matching. Moreover, the hierarchical approach helps comparing networks represented at different scales. It provides global statistics but also step-by-step maps that helps characterizing the spatial distribution of network delineation errors
Extraction of thalweg networks from DTMs: application to badlands
Contact: [email protected] study gully spatial patterns in the badlands using a continuous thalweg vector network, this paper presents methods to extract the badlands' thalweg network from a regular grid digital terrain model (DTM) by combining terrain morphology indices with a drainage algorithm. This method will delineate a thalweg only where the DTM denotes a significant curvature with respect to DTM accuracy and relies on three major steps. First, discontinuous concave areas were detected from the DTM using morphological criteria, either the plan curvature or the convergence index. Second, the concave areas were connected using a drainage algorithm, which provides a continuous, thick, tree-structured scheme. We assumed that these areas were physically significant and corresponded to a gully floor. Finally, the thick path was reduced to its main course and vectorised to obtain a thalweg network. The methods were applied to both virtual and actual DTM cases. The actual case was a LiDAR DTM of the Draix badlands in the French Alps. The obtained networks were quantitatively compared, both with a network obtained using the usual drainage area criteria and with a reference network mapped in the field. The CI-based network showed the great potential for thalweg network extraction
Quantization Watermarking for Joint Compression and Data Hiding Schemes
International audienceEnrichment and protection of JPEG2000 images is an important issue. Data hiding techniques are a good solution to solve these problems. In this context, we can consider the joint approach to introduce data hiding technique into JPEG2000 coding pipeline. Data hiding consists of imperceptibly altering multimedia content, to convey some information. This process is done in such a way that the hidden data is not perceptible to an observer. Digital watermarking is one type of data hiding. In addition to the imperceptibility and payload constraints, the watermark should be robust against a variety of manipulations or attacks. We focus on trellis coded quantization (TCQ) data hiding techniques and propose two JPEG2000 compression and data hiding schemes. The properties of TCQ quantization, defined in JPEG2000 part 2, are used to perform quantization and information embedding during the same time. The first scheme is designed for content description and management applications with the objective of achieving high payloads. The compression rate/imperceptibility/payload trade off is our main concern. The second joint scheme has been developed for robust watermarking and can have consequently many applications. We achieve the better imperceptibility/robustness trade off in the context of JPEG2000 compression. We provide some experimental results on the implementation of these two schemes
Remote ischemic preconditioning in patients with intermittent claudication
OBJECTIVE: Remote ischemic preconditioning (RIPC) is a phenomenon in which a short period of sub-lethal ischemia in one organ protects against subsequent bouts of ischemia in another organ. We hypothesized that RIPC in patients with intermittent claudication would increase muscle tissue resistance to ischemia, thereby resulting in an increased ability to walk.
METHODS: In a claudication clinic, 52 ambulatory patients who presented with complaints of intermittent claudication in the lower limbs associated with an absent or reduced arterial pulse in the symptomatic limb and/or an ankle-brachial index <0.90 were recruited for this study. The patients were randomly divided into three groups (A, B and C). All of the patients underwent two tests on a treadmill according to the Gardener protocol. Group A was tested first without RIPC. Group A was subjected to RIPC prior to the second treadmill test. Group B was subjected to RIPC prior to the first treadmill test and then was subjected to a treadmill test without RIPC. In Group C (control group), both treadmill tests were performed without RIPC. The first and second tests were conducted seven days apart. Brazilian Clinical Trials: RBR-7TF6TM.
RESULTS: Group A showed a significant increase in the initial claudication distance in the second test compared to the first test.
CONCLUSION: RIPC increased the initial claudication distance in patients with intermittent claudication; however, RIPC did not affect the total walking distance of the patients
Oxydation humide des polluants organiques par l'oxygène moléculaire activée par le couple H²O²/Fe²+: Optimisation des paramètres opératoires
L'oxydation humide par l'oxygène moléculaire (procédé WAO) activée par le couple (H202/Fe2+) a été mise en oeuvre pour l'oxydation de la pollution organique aqueuse à travers deux composés modèles: l'acide succinique, normalement oxydable, et l'acide acétique, réputé réfractaire. L'influence des différents facteurs a été étudiée par la planification d'expériences. Après leur recensement, une étape préliminaire de criblage a été menée à bien en utilisant une matrice de Plackett et Burman. Seuls les paramètres les plus influents ont été gardés pour l'étape ultérieure d'établissement de modèles prévisionnels à partir d'une matrice composite centrée orthogonale. Les modèles établis ont été validés et ont permis de déterminer les conditions optimales de fonctionnement. L'effet de la température fait apparaître un optimum, à environ 200 °C, au-delà duquel la décomposition du peroxyde devient trop rapide. L'effet de la quantité de peroxyde d'hydrogène introduit est déterminant et l'ajout de moins de 20 % de la quantité stoechiomé- trique permet d'obtenir à 200 °C, avec environ 10 ppm de sels de fer, une efficacité de traitement d'environ 70% pour un composé normalement oxydable. Dans des conditions analogues, le procédé conventionnel sans promoteur conduit à une efficacité inférieure à 5 %.Wet air oxidation (WAO) is a liquid phase oxidation process using molecular oxygen at high temperature (250-300°C) and high pressure (50-150 bar). It can help treating toxic organic aqueous wastes from chemical industries with efficiencies up to 98% after 1 hour. The process can also help treating sludges from domestic sewage treatment facilities. It is usually very cost effective because of the very high operating pressure.This paper deals with the promoted wet air oxidation of acetic acid, rnodel compound for refractory wastes, and succinic acid, model for readily oxidized wastes. The study was conducted in order to determine the promoting effect when adding small dosages of hydrogen peroxide (with iron salts) during oxidation by molecular oxygen. It was previously shown that the initiating step is very temperature dependent (Reaction I) and limits the overall oxidation process The addition of small amounts of H2O2/Fe2+ (Fenton's reagent) can promote the forrnation of very reactive OH• radicals able to develop R• radicals (Reaction IV), even at a low temperature. Then, the oxidation (Reactions VI and VII) continues using molecular oxygen, but the peroxide should be added continuously during a batch test in order to maintain the initiating step.An optimal design methodology was used in order to assess the dependency of the oxidation effrciency on the various parameters and mainly on the promotors. At frrst, a Plackett and Burman design of experiments (PE1) was used to screen the most important variables among those likely to have an effect. The design of experiments, the conditions of the runs and the results (tables 1 to 3) allowed the determination of a new experimental domain and the selection of the four most important variables for the further design of experiments. At the same time, the effect of an addition of phenol (able to reduce iron to the ferrous species, more efficient) was considered. For succinic acid oxidation, a central composite optimal design (PE2) was used (tables 4 and 5). The results allowed us to establish a predictive model (Relationship lX, table 6 and figure 2) and typical results are presented in figures 3 and 4. Approximately 50% oxidation efficiencies could be obtained at 200°C; without peroxide addition, only 5% efficiency is obtained under similar conditions. Moreover, it was observed that the optimum temperature is around 205°C and that phenol is not compatible with peroxide as a promotor. A third optimal design (PE3) was used to predict the efficiency of the method for the treatrnent of acetic acid, a model for a refractory waste. It is composed only of a fractional factorial design (table 7 and 8) and the bias corresponds to the main quadratic effect of temperature (Relationship XIII and table 10). The optimum temperâture is also 205°C and greater than 20% oxidation efficiencies are obtained; at such a temperature, acetic acid cannot be oxidized with the conventional process.The results obtained for the two model compounds validate this oxidation technique. The addition of about 10 ppm of ferrous iron and of less than 20% of the stoichiometric amount in hydrogen peroxide can turn a high pressure WAO process into a medium pressure one
Oxford SWIFT IFS and multi-wavelength observations of the Eagle galaxy at z=0.77
The `Eagle' galaxy at a redshift of 0.77 is studied with the Oxford Short
Wavelength Integral Field Spectrograph (SWIFT) and multi-wavelength data from
the All-wavelength Extended Groth strip International Survey (AEGIS). It was
chosen from AEGIS because of the bright and extended emission in its slit
spectrum. Three dimensional kinematic maps of the Eagle reveal a gradient in
velocity dispersion which spans 35-75 +/- 10 km/s and a rotation velocity of 25
+/- 5 km/s uncorrected for inclination. Hubble Space Telescope images suggest
it is close to face-on. In comparison with galaxies from AEGIS at similar
redshifts, the Eagle is extremely bright and blue in the rest-frame optical,
highly star-forming, dominated by unobscured star-formation, and has a low
metallicity for its size. This is consistent with its selection. The Eagle is
likely undergoing a major merger and is caught in the early stage of a
star-burst when it has not yet experienced metal enrichment or formed the mass
of dust typically found in star-forming galaxies.Comment: accepted for publication in MNRA
IMAGES I. Strong evolution of galaxy kinematics since z=1
(abbreviated) We present the first results of the ESO large program,
``IMAGES'' which aims at obtaining robust measurements of the kinematics of
distant galaxies using the multi-IFU mode of GIRAFFE on the VLT. 3D
spectroscopy is essential to robustly measure the often distorted kinematics of
distant galaxies (e.g., Flores et al. 2006). We derive the velocity fields and
-maps of 36 galaxies at 0.4<z<0.75 from the kinematics of the [OII]
emission line doublet, and generate a robust technique to identify the nature
of the velocity fields based on the pixels of the highest signal-to-noise
ratios (S/N). We have gathered a unique sample of 63 velocity fields of
emission line galaxies (W0([OII]) > 15 A) at z=0.4-0.75, which are a
representative subsample of the population of M_stellar>1.5x10^{10} M_sun
emission line galaxies in this redshift range, and are largely unaffected by
cosmic variance. Taking into account all galaxies -with or without emission
lines- in that redshift range, we find that at least 41+/-7% of them have
anomalous kinematics, i.e., they are not dynamically relaxed. This includes
26+/-7% of distant galaxies with complex kinematics, i.e., they are not simply
pressure or rotationally supported. Our result implies that galaxy kinematics
are among the most rapidly evolving properties, because locally, only a few
percent of the galaxies in this mass range have complex kinematics.Comment: 17 pages, 6 figures, Accepted by A&
Simple model of the rf noise generated by multipacting electrons
A simplified analytical model is developed to predict the spectrum of electric current induced by the multipacting electrons between two parallel electrodes exposed to an rf voltage of fixed amplitude. The model is based on the resonant multipactor theory and makes it possible to calculate the relative spectral amplitudes of electric current at different harmonics and sub-harmonics of the applied rf frequency. The theoretical predictions are confirmed by numerical simulations of multipactor inside a rectangular waveguide. Specifically it is seen that the relative height of the spectral peaks decreases with increasing gap height
- …