269 research outputs found

    AVERAGE TOTAL HEMISPHERIC EMISSIVITY MEASUREMENT IN THE LWIR SPECTRUM FOR ADHESIVE TAPES USED IN THE THERMOGRAPHY TAPE TEST

    Get PDF
    Thermographers often use comparative methods to estimate surfaceemissivity. Among the most used is the tape method. In this method a knownemissivity tape in the LWIR (Long Wavelength Infrared) spectrum is placedon the surface to be inspected. After thermal equilibrium, the temperature ofthe tape and the surface under inspection must be the same. In this case, thetemperature observed on the tape is the reference temperature. The emissivityof the surface must then be changed until the reference temperature isreached. It is common practice to admit the value of the emissivity of theadhesive tape as 0.95, there are few studies that present these data withmetrological rigor, which leads to doubts about the emissivity of thecommercial tapes. In this work, experiments were performed on Tekbond,Double A, 3M 101, Rapix, Altape, adhesive tapes for temperatures of 50, 55,60, 65 and 70ºC. An experimental apparatus was developed through which itwas possible to estimate surface reflection, transmission and atmosphericemission for one and two layers of tapes, in order to make emissivitymeasurements possible. Through the data it was possible to statisticallyestimate the LWIR average total hemispheric emissivity as well as theacceptance range to 95% certainty, being therefore equal to ε=0.94±0.03. Itis possible to arm, therefore, that the value of 0.95, usually used as emissivityof the adhesive tape, is extremely reasonable because it is 0.01 of the averagevalue of the Gaussian distribution calculated by this work

    EXPERIMENTAL STUDY OF A DOMESTIC SOLAR HEATER WITH IRON ORE AS THE ABSORBER

    Get PDF
    In Brazil's households, the use of electricity to heat water prevails, but its replacement by solar collectors can be justified due to the country's high level of solar radiation, average temperature and number of sunny days. A drawback preventing the broad spread of this technology its elevated inicial cost that, in spite of the short return on investment time, hinders its insertions on the population lower classes. Thereby, this study's goal is to search a cheaper alternative to one of the collector's most expensive component, by proposing the replacement of the aluminium sheets, used as absorber, by iron ore. This material was chosen due to its abundance in Minas Gerais, low cost and for being dark colored, ensuring high levels of absortance (0,4 < λ< 0,7 µm). A finely grained hematitic () ore was used to achieve an uniform compaction throughout its area, reducing this way, the thermal contact resistance between the absorber and the copper tubes. The collector was built and tested in similar conditions it would have faced during its lifespan, and the result shows that the maximum thermal efficiency was 58%

    Interventions to Improve Vaccination Uptake and Cost Effectiveness of Vaccination Strategies in Newly Arrived Migrants in the EU/EEA: A Systematic Review.

    Get PDF
    Newly arrived migrants to the EU/EEA (arrival within the past five years), as well as other migrant groups in the region, might be under-immunised and lack documentation of previous vaccinations, putting them at increased risk of vaccine-preventable diseases circulating in Europe. We therefore performed a systematic review conforming to PRISMA guidelines (PROSPERO CRD42016045798) to explore: (i) interventions that improve vaccine uptake among migrants; and (ii) cost-effectiveness of vaccination strategies among this population. We searched MEDLINE, Embase, CINAHL, and Cochrane Database of Systematic Reviews (CDSR) between 1 January 2006 to 18 June 2018. We included three primary intervention studies performed in the EU/EEA or high-income countries and one cost effectiveness study relevant to vaccinations in migrants. Intervention studies showed small but promising impact only on vaccine uptake with social mobilization/community outreach, planned vaccination programs and education campaigns. Targeting migrants for catch-up vaccination is cost effective for presumptive vaccination for diphtheria, tetanus, and polio, and there was no evidence of benefit of carrying out pre-vaccination serological testing. The cost-effectiveness is sensitive to the seroprevalence and adherence to vaccinations of the migrant. We conclude that scarce but direct EU/EEA data suggest social mobilization, vaccine programs, and education campaigns are promising strategies for migrants, but more research is needed. Research should also study cost effectiveness of strategies. Vaccination of migrants should continue to be a public heath priority in EU/EEA

    A clock network for geodesy and fundamental science

    Get PDF
    Leveraging the unrivaled performance of optical clocks in applications in fundamental physics beyond the standard model, in geo-sciences, and in astronomy requires comparing the frequency of distant optical clocks truthfully. Meeting this requirement, we report on the first comparison and agreement of fully independent optical clocks separated by 700 km being only limited by the uncertainties of the clocks themselves. This is achieved by a phase-coherent optical frequency transfer via a 1415 km long telecom fiber link that enables substantially better precision than classical means of frequency transfer. The fractional precision in comparing the optical clocks of three parts in 101710^{17} was reached after only 1000 s averaging time, which is already 10 times better and more than four orders of magnitude faster than with any other existing frequency transfer method. The capability of performing high resolution international clock comparisons paves the way for a redefinition of the unit of time and an all-optical dissemination of the SI-second.Comment: 14 pages, 3 figures, 1 tabl

    Protocol for the development of guidance for stakeholder engagement in health and healthcare guideline development and implementation

    Get PDF
    Stakeholder engagement has become widely accepted as a necessary component of guideline development and implementation. While frameworks for developing guidelines express the need for those potentially affected by guideline recommendations to be involved in their development, there is a lack of consensus on how this should be done in practice. Further, there is a lack of guidance on how to equitably and meaningfully engage multiple stakeholders. We aim to develop guidance for the meaningful and equitable engagement of multiple stakeholders in guideline development and implementation. METHODS: This will be a multi-stage project. The first stage is to conduct a series of four systematic reviews. These will (1) describe existing guidance and methods for stakeholder engagement in guideline development and implementation, (2) characterize barriers and facilitators to stakeholder engagement in guideline development and implementation, (3) explore the impact of stakeholder engagement on guideline development and implementation, and (4) identify issues related to conflicts of interest when engaging multiple stakeholders in guideline development and implementation. DISCUSSION: We will collaborate with our multiple and diverse stakeholders to develop guidance for multi-stakeholder engagement in guideline development and implementation. We will use the results of the systematic reviews to develop a candidate list of draft guidance recommendations and will seek broad feedback on the draft guidance via an online survey of guideline developers and external stakeholders. An invited group of representatives from all stakeholder groups will discuss the results of the survey at a consensus meeting which will inform the development of the final guidance papers. Our overall goal is to improve the development of guidelines through meaningful and equitable multi-stakeholder engagement, and subsequently to improve health outcomes and reduce inequities in health

    Protocol: Health, social care and technological interventions to improve functional ability of older adults: Evidence and gap map

    Get PDF
    This is the final version. Available on open access from Wiley via the DOI in this frecordThis is a protocol for a Campbell Evidence and Gap Map. The objectives are to identify and assess the available evidence on health, social care and technological interventions to improve functional ability among older adults

    Family coordination in families who have a child with autism spectrum disorder

    Get PDF
    Little is known about the interactions of families where there is a child with autism spectrum disorder (ASD). The present study applies the Lausanne Trilogue Play (LTP) to explore both its applicability to this population as well as to assess resources and areas of deficit in these families. The sample consisted of 68 families with a child with ASD, and 43 families with a typically developing (TD) child. With respect to the global score for family coordination there were several negative correlations: the more severe the symptoms (based on the child’s ADOS score), the more family coordination was dysfunctional. This correlation was particularly high when parents had to play together with the child. In the parts in which only one of the parents played actively with the child, while the other was simply present, some families did achieve scores in the functional range, despite the child’s symptom severity. The outcomes are discussed in terms of their clinical implications both for assessment and for interventio

    Comparing ultrastable lasers at 7 × 10−17 fractional frequency instability through a 2220 km optical fibre network

    Get PDF
    Ultrastable lasers are essential tools in optical frequency metrology enabling unprecedented measurement precision that impacts on fields such as atomic timekeeping, tests of fundamental physics, and geodesy. To characterise an ultrastable laser it needs to be compared with a laser of similar performance, but a suitable system may not be available locally. Here, we report a comparison of two geographically separated lasers, over the longest ever reported metrological optical fibre link network, measuring 2220 km in length, at a state-of-the-art fractional-frequency instability of 7 × 10−17 for averaging times between 30 s and 200 s. The measurements also allow the short-term instability of the complete optical fibre link network to be directly observed without using a loop-back fibre. Based on the characterisation of the noise in the lasers and optical fibre link network over different timescales, we investigate the potential for disseminating ultrastable light to improve the performance of remote optical clocks
    corecore