1,464 research outputs found
Active deformation of the South Granite Mountain Fault System : reactivated compressional faults vs. extensional overprinting
[EMBARGOED UNTIL 6/1/2023] Quaternary faulting in and around Wyoming's Wind River Basin may pose a moderate earthquake risk for dams and other infrastructure within the region. The South Granite Mountains Fault Zone, located adjacent to the Wind River Basin, is one of several Quaternary faults in the region. The South Granite Mountains formed during the Late Cretaceous Laramide orogeny (75-45 Ma). Subsequently, during the Eocene, the extensive downfaulting and downfolding caused the Precambrian Mountain core to collapse forming the Sweetwater Graben. Recent Quaternary deformation is expressed as fault scarps along the north side of the Granite Mountains (2-4 meters). These features were originally studied in the 1980s but have received little attention since. In particular, the nature and style of faulting of this recent deformation was previously undocumented, and prior age estimates were broad. This study applies new methodologies to assess the active tectonics and earthquake potential of the South Granite Mountains Fault System. Low-altitude aerial surveying using drones facilitate the measurement and analysis of fault scarp morphology. From this scarp degradation modeling is applied to faulted surfaces with an age range of [greater than] 201 to 16 ka. Results indicate long term dip slip rates between 0.01-0.05 mm/yr, and Horizontal extension rates between 0.01 - 0.03 mm/yr along the Ferris Mountains front. Shallow seismic reflection profiling is used to image the fault geometry indicating normal faulting at high angles (83 degrees). Offset of the unconformity between the Split Rock Formation and the Quaternary sediments is estimated at 10-13 meters. Using modern rates of faulting suggest quaternary faults initiated at 80-104 ka.Includes bibliographical references
Insecticide Resistance in the Bed Bug Comes with a Cost
Adaptation to new environmental stress is often associated with an alteration of one or more life history parameters. Insecticide resistant populations of insects often have reduced fitness relative to susceptible populations in insecticide free environments. Our previous work showed that three populations of bed bugs, Cimex lectularius L., evolved significantly increased levels of resistance to one product containing both β-cyfluthrin and imidacloprid insecticides with only one generation of selection, which gave us an opportunity to explore potential tradeoffs between life history parameters and resistance using susceptible and resistant strains of the same populations. Life history tables were compiled by collecting weekly data on mortality and fecundity of bugs from each strain and treatment throughout their lives. Selection led to a male-biased sex ratio, shortened oviposition period, and decreased life-time reproductive rate. Generation time was shortened by selection, a change that represents a benefit rather than a cost. Using these life history characteristics we calculated that there would be a 90% return to pre-selection levels of susceptibility within 2- 6.5 generations depending on strain. The significant fitness costs associated with resistance suggest that insecticide rotation or utilization of non-insecticidal control tactics could be part of an effective resistance management strategy
Population Variation In and Selection For Resistance to Pyrethroid-Neonicotinoid Insecticides in the Bed Bug
Pyrethroid resistance in bed bugs, Cimex lectularius, has prompted a change to combination products that include a pyrethroid and a neonicotinoid. Ten populations of bed bugs were challenged with two combination products (Temprid SC and Transport GHP). Susceptibility of these populations varied, with the correlated response of the two products indicating cross resistance. We imposed selection on three populations using label rate Temprid, and then reared progeny from unselected and selected strains. All selected strains were significantly less susceptible to Temprid SC than unselected strains. Temprid selected strains were also less susceptible to Transport. The pyrethroid component of Temprid showed a significantly higher LD50 in selected strains, but susceptibility to the neonicotinoid remained unchanged. Taken together these results indicate resistance to combination insecticides is present in field populations at levels that should be of concern, and that short-term selection affecting existing variance in susceptibility can quickly increase resistance
Pseudo-ductility in intermingled carbon/glass hybrid composites with highly aligned discontinuous fibres
AbstractThe aim of this research is to manufacture intermingled hybrid composites using aligned discontinuous fibres to achieve pseudo-ductility. Hybrid composites, made with different types of fibres that provide a balanced suite of modulus, strength and ductility, allow avoiding catastrophic failure that is a key limitation of composites. Two different material combinations of high strength carbon/E-glass and high modulus carbon/E-glass were selected. Several highly aligned and well dispersed short fibre hybrid composites with different carbon/glass ratios were manufactured and tested in tension in order to investigate the carbon ratio effect on the stress–strain curve. Good pseudo-ductile responses were obtained from the high modulus carbon/E-glass composites due to the fragmentation of the carbon fibres. The experimental results were also compared with an analytical solution. The intermingled hybrid composite with 0.25 relative carbon ratio gave the maximum pseudo-ductile strain, 1.1%, with a 110GPa tensile modulus. Moreover, the initial modulus of the intermingled hybrids with 0.4 relative carbon ratio is 134GPa, 3.5 times higher than that of E-glass/epoxy composites. The stress–strain curve shows a clear “yield point” at 441MPa and a well dispersed and gradual damage process
3D printing the future: scenarios for supply chains reviewed
Purpose: The aim of this paper is to evaluate existing scenarios for 3D Printing in order to identify the “white space” where future opportunities have not been proposed or developed to date. Based around aspects of order penetration points, geographical scope and type of manufacturing, these gaps are identified. Design/methodology/approach: A structured literature review has been carried out on both academic and trade publications. As of the end of May 2016, this identified 128 relevant articles containing 201 future scenarios. Coding these against aspects of existing manufacturing and supply chain theory has led to the development of a framework for identify “white space” in existing thinking. Findings: The coding shows that existing future scenarios are particularly concentrated on job shop applications and pull based supply chain processes, although there are fewer constraints on geographical scope. Five distinct areas of “white space” are proposed, reflecting various opportunities for future 3DP supply chain development. Research limitations: Being a structured literature review, there are potentially articles not identified through the search criteria used. The nature of the findings is also dependent upon the coding criteria selected. However, these are theoretically derived and reflect important aspect of strategic supply chain management. Practical implications: Practitioners may wish to explore the development of business models within the “white space” areas. Originality/value: Currently, existing future 3DP scenarios are scattered over a wide, multi-disciplinary literature base. By providing a consolidated view of these scenarios, it is possible to identify gaps in current thinking. These gaps are multidisciplinary in nature and represent opportunities for both academics and practitioners to exploit
Sodium Atoms in the Lunar Exotail: Observed Velocity and Spatial Distributions
The lunar sodium tail extends long distances due to radiation pressure on sodium atoms in the lunar exosphere. Our earlier observations measured the average radial velocity of sodium atoms moving down the lunar tail beyond Earth (i.e., near the anti-lunar point) to be ~ 12.5 km/s. Here we use the Wisconsin H-alpha Mapper to obtain the first kinematically resolved maps of the intensity and velocity distribution of this emission over a 15 x 15 deg region on the sky near the anti-lunar point. We present both spatially and spectrally resolved observations obtained over four nights bracketing new Moon in October 2007. The spatial distribution of the sodium atoms is elongated along the ecliptic with the location of the peak intensity drifting 3 deg east along the ecliptic per night. Preliminary modeling results suggest the spatial and velocity distributions in the sodium exotail are sensitive to the near surface lunar sodium velocity distribution. Future observations of this sort along with detailed modeling offer new opportunities to describe the time history of lunar surface sputtering over several days
Fibroblast growth factors 1 and 2 in cerebrospinal fluid are associated with HIV disease, methamphetamine use, and neurocognitive functioning.
BackgroundHuman immunodeficiency virus (HIV) and methamphetamine use commonly affect neurocognitive (NC) functioning. We evaluated the relationships between NC functioning and two fibroblast growth factors (FGFs) in volunteers who differed in HIV serostatus and methamphetamine dependence (MAD).MethodsA total of 100 volunteers were categorized into four groups based on HIV serostatus and MAD in the prior year. FGF-1 and FGF-2 were measured in cerebrospinal fluid by enzyme-linked immunosorbent assays along with two reference biomarkers (monocyte chemotactic protein [MCP]-1 and neopterin). Comprehensive NC testing was summarized by global and domain impairment ratings.ResultsSixty-three volunteers were HIV+ and 59 had a history of MAD. FGF-1, FGF-2, and both reference biomarkers differed by HIV and MAD status. For example, FGF-1 levels were lower in subjects who had either HIV or MAD than in HIV- and MAD- controls (P=0.003). Multivariable regression identified that global NC impairment was associated with an interaction between FGF-1 and FGF-2 (model R(2)=0.09, P=0.01): higher FGF-2 levels were only associated with neurocognitive impairment among subjects who had lower FGF-1 levels. Including other covariates in the model (including antidepressant use) strengthened the model (model R(2)=0.18, P=0.004) but did not weaken the association with FGF-1 and FGF-2. Lower FGF-1 levels were associated with impairment in five of seven cognitive domains, more than FGF-2, MCP-1, or neopterin.ConclusionThese findings provide in vivo support that HIV and MAD alter expression of FGFs, which may contribute to the NC abnormalities associated with these conditions. These cross-sectional findings cannot establish causality and the therapeutic benefits of recombinant FGF-1 need to be investigated
- …