2,259 research outputs found
Areas of Seal R/D at GE
About four years ago, work was completed on a 36 inch diameter gas to gas carbon ring seal used to buffer low pressure turbine air at the rim of the forward outer flowpath on the GE36 unducted fan (UDF) engine. At about the same time, we were developing a long life counter-rotating intershaft air-oil seal of approximately 7.6 inch diameter for operation at 800 fps, 800 F, and 50 psid. Although we were successful in meeting most program goals with a split ring seal of the axial bushing type, the seal with the greatest payoff in life and air leakage rates, bearing many features in common with the GE36 seal, could not be successfully tested because of the structural weakness of the primary seal ring carbon material. This was a split ring seal using a hybrid combination of orifice compensated hydrostatic and shrouded hydrodynamic gas bearings. We are presently working to develop this design in conjunction with high strength materials being developed by Pure Carbon Co. In the area of engine secondary gas flow path-sealing for performance improvement, we are currently working with carbon and all metal face seals. A 15 inch diameter all metal 'aspirating' face seal, using self-acting hydrostatic bearings, was successfully tested to 700 fps, 100 psid, and 1000 F, demonstrating long life at flow reduction of 86 percent compared to a 'best' labyrinth. This seal will be developed through 1400 F, 900 fps, and 350 psid. The seal 'aspirates' closed at about idle speed pressure during engine start and reopens at engine shutdown. A hydraulic thrust balance seal, currently using orifice compensated hydrostatics, is under development. Other aspects of these projects are briefly covered
Professional boundaries: crossing a line or entering the shadows?
This article explores the professional boundaries guidance for social workers. It presents research findings from the formal literature, from agency codes of practice, from telephone interviews with regulatory and professional bodies and from an exercise using âsnowballing techniquesâ in which informants responded to brief scenarios illustrating boundary dilemmas. The findings suggest that formal research plays little part in the guidance that individuals use to help them determine professional boundaries. Similarly, only 10â15 per cent of informants made regular reference to regulatory and professional codes of practice, with an even smaller percentage quoting specific sections from these codes. A slightly larger group (15â20 per cent) made fairly regular reference to their agency's policy documents. However, a clear majority relied on their own sense of what is appropriate or inappropriate, and made their judgements with no reference to any formal guidance. Agency guidance tended to ignore the ambiguous areas of practice and seemed to act as an insurance policy, brought out and dusted off when something goes awry. The authors caution against ever-increasing bullet points of advice and prescription, and advance a notion of ethical engagement in which professionals exercise their ethical senses through regular discussion of professional boundary dilemmas
Discharge coefficient of an orifice jet in cross flow: influence of inlet conditions and optimum velocity ratio
The present work aims to characterize the discharge performance of aircraft door vent flaps. For this purpose, three different configurations with increasing complexity are studied with a RANS and a LES solver. The first configuration consists of an orifice plate in a duct for which experimental pressure loss data are available in the literature. This configuration is used as a reference for the validation of the RANS and LES setups. The duct placed downstream of the orifice is then removed to produce an unconfined geometry in which the orifice jet discharges either into an open atmosphere or a transverse flow. Finally, a classic jet in cross flow is also studied. The main objective is to analyze the discharge coefficient variations depending on three key parameters: (i) the jet Reynolds number, (ii) the inlet velocity profile, and (iii) the velocity ratio between the jet and the cross flow. Results show that for cases without cross flow, the jet Reynolds number has no influence on the discharge performance whereas a steady decrease of the orifice pressure loss is observed as the duct inlet velocity profile is deformed from that of a flat profile. The Poiseuille profile is found to minimize the pressure loss. In addition, numerical data of the reference configuration compare well with experimental values when such a profile is prescribed. Finally, simulations with a cross flow evidence an optimal velocity ratio for which the discharge coefficient is maximum and exceeds the freejet value
Effects of Particulate Air Pollution on Cardiovascular Health: A Population Health Risk Assessment
Particulate matter (PM) air pollution is increasingly recognized as an important and modifiable risk factor for adverse health outcomes including cardiovascular disease (CVD). However, there are still gaps regarding large population risk assessment. Results from the nationwide Behavioral Risk Factor Surveillance System (BRFSS) were used along with air quality monitoring measurements to implement a systematic evaluation of PM-related CVD risks at the national and regional scales. CVD status and individual-level risk factors were collected from more than 500,000 BRFSS respondents across 2,231 contiguous U.S. counties for 2007 and 2009. Chronic exposures to PM pollutants were estimated with spatial modeling from measurement data. CVD outcomes attributable to PM pollutants were assessed by mixed-effects logistic regression and latent class regression (LCR), with adjustment for multicausality. There were positive associations between CVD and PM after accounting for competing risk factors: the multivariable-adjusted odds for the multiplicity of CVD outcomes increased by 1.32 (95% confidence interval: 1.23â1.43) and 1.15 (1.07â1.22) times per 10 ”g/m3 increase in PM2.5 and PM10 respectively in the LCR analyses. After controlling for spatial confounding, there were moderate estimated effects of PM exposure on multiple cardiovascular manifestations. These results suggest that chronic exposures to ambient particulates are important environmental risk factors for cardiovascular morbidity
Single Molecule Statistics and the Polynucleotide Unzipping Transition
We present an extensive theoretical investigation of the mechanical unzipping
of double-stranded DNA under the influence of an applied force. In the limit of
long polymers, there is a thermodynamic unzipping transition at a critical
force value of order 10 pN, with different critical behavior for homopolymers
and for random heteropolymers. We extend results on the disorder-averaged
behavior of DNA's with random sequences to the more experimentally accessible
problem of unzipping a single DNA molecule. As the applied force approaches the
critical value, the double-stranded DNA unravels in a series of discrete,
sequence-dependent steps that allow it to reach successively deeper energy
minima. Plots of extension versus force thus take the striking form of a series
of plateaus separated by sharp jumps. Similar qualitative features should
reappear in micromanipulation experiments on proteins and on folded RNA
molecules. Despite their unusual form, the extension versus force curves for
single molecules still reveal remnants of the disorder-averaged critical
behavior. Above the transition, the dynamics of the unzipping fork is related
to that of a particle diffusing in a random force field; anomalous,
disorder-dominated behavior is expected until the applied force exceeds the
critical value for unzipping by roughly 5 pN.Comment: 40 pages, 18 figure
Search for Narrow Diphoton Resonances and for gamma-gamma+W/Z Signatures in p\bar p Collisions at sqrt(s)=1.8 TeV
We present results of searches for diphoton resonances produced both
inclusively and also in association with a vector boson (W or Z) using 100
pb^{-1} of p\bar p collisions using the CDF detector. We set upper limits on
the product of cross section times branching ratio for both p\bar
p\to\gamma\gamma + X and p\bar p\to\gamma\gamma + W/Z. Comparing the inclusive
production to the expectations from heavy sgoldstinos we derive limits on the
supersymmetry-breaking scale sqrt{F} in the TeV range, depending on the
sgoldstino mass and the choice of other parameters. Also, using a NLO
prediction for the associated production of a Higgs boson with a W or Z boson,
we set an upper limit on the branching ratio for H\to\gamma\gamma. Finally, we
set a lower limit on the mass of a `bosophilic' Higgs boson (e.g. one which
couples only to \gamma, W, and Z$ bosons with standard model couplings) of 82
GeV/c^2 at 95% confidence level.Comment: 30 pages, 11 figure
Inclusive Search for Anomalous Production of High-pT Like-Sign Lepton Pairs in Proton-Antiproton Collisions at sqrt{s}=1.8 TeV
We report on a search for anomalous production of events with at least two
charged, isolated, like-sign leptons with pT > 11 GeV/c using a 107 pb^-1
sample of 1.8 TeV ppbar collisions collected by the CDF detector. We define a
signal region containing low background from Standard Model processes. To avoid
bias, we fix the final cuts before examining the event yield in the signal
region using control regions to test the Monte Carlo predictions. We observe no
events in the signal region, consistent with an expectation of
0.63^(+0.84)_(-0.07) events. We present 95% confidence level limits on new
physics processes in both a signature-based context as well as within a
representative minimal supergravity (tanbeta = 3) model.Comment: 15 pages, 4 figures. Minor textual changes, cosmetic improvements to
figures and updated and expanded reference
Search for right-handed W bosons in top quark decay
We present a measurement of the fraction f+ of right-handed W bosons produced
in top quark decays, based on a candidate sample of events in the
lepton+jets decay mode. These data correspond to an integrated luminosity of
230pb^-1, collected by the DO detector at the Fermilab Tevatron
Collider at sqrt(s)=1.96 TeV. We use a constrained fit to reconstruct the
kinematics of the and decay products, which allows for the
measurement of the leptonic decay angle for each event. By comparing
the distribution from the data with those for the expected
background and signal for various values of f+, we find
f+=0.00+-0.13(stat)+-0.07(syst). This measurement is consistent with the
standard model prediction of f+=3.6x10^-4.Comment: Submitted to Physical Review D Rapid Communications 7 pages, 3
figure
Measurement of Semileptonic Branching Fractions of B Mesons to Narrow D** States
Using the data accumulated in 2002-2004 with the DO detector in
proton-antiproton collisions at the Fermilab Tevatron collider with
centre-of-mass energy 1.96 TeV, the branching fractions of the decays B ->
\bar{D}_1^0(2420) \mu^+ \nu_\mu X and B -> \bar{D}_2^{*0}(2460) \mu^+ \nu_\mu X
and their ratio have been measured: BR(\bar{b}->B) \cdot BR(B-> \bar{D}_1^0
\mu^+ \nu_\mu X) \cdot BR(\bar{D}_1^0 -> D*- pi+) =
(0.087+-0.007(stat)+-0.014(syst))%; BR(\bar{b}->B)\cdot BR(B->D_2^{*0} \mu^+
\nu_\mu X) \cdot BR(\bar{D}_2^{*0} -> D*- \pi^+) =
(0.035+-0.007(stat)+-0.008(syst))%; and (BR(B -> \bar{D}_2^{*0} \mu^+ \nu_\mu
X)BR(D2*0->D*- pi+)) / (BR(B -> \bar{D}_1^{0} \mu^+ \nu_\mu X)\cdot
BR(\bar{D}_1^{0}->D*- \pi^+)) = 0.39+-0.09(stat)+-0.12(syst), where the charge
conjugated states are always implied.Comment: submitted to Phys. Rev. Let
- âŠ