Using small-angle X-ray scattering to investigate the compaction behaviour of a granulated clay

The compaction behaviour of a commercial granulated clay (magnesium aluminium smectite, gMgSm) was investigated using macroscopic pressure-density measurements, X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray microtomography (XμT) and small-angle X-ray scattering (SAXS). This material was studied as a potential compaction excipient for pharmaceutical tabletting, but also as a model system demonstrating the capabilities of SAXS for investigating compaction in other situations. Bulk compaction measurements showed that the gMgSm was more difficult to compact than polymeric pharmaceutical excipients such as spheronised microcrystalline cellulose (sMCC), corresponding to harder granules. Moreover, in spite of using lubrication (magnesium stearate) on the tooling surfaces, rather high ejection forces were observed, which may cause problems during commercial tabletting, requiring further amelioration. Although the compacted gMgSm specimens were more porous, however, they still exhibited acceptable cohesive strengths, comparable to sMCC. Hence, there may be scope for using granular clay as one component of a tabletting formulation. Following principles established in previous work, SAXS revealed information concerning the intragranular structure of the gMgSm and its response to compaction. The results showed that little compression of the intragranular morphology occurred below a relative density of 0 · 6, suggesting that granule rearrangements or fragmentation were the dominant mechanisms during this stage. By contrast, granule deformation became considerably more important at higher relative density, which also coincided with a significant increase in the cohesive strength of compacted specimens. Spatially-resolved SAXS data was also used to investigate local variations in compaction behaviour within specimens of different shape. The results revealed the expected patterns of density variations within flat-faced cylindrical specimens. Significant variations in density, the magnitude of compressive strain and principal strain direction were also revealed in the vicinity of a debossed feature (a diametral notch) and within bi-convex specimens. The variations in compaction around the debossed notch, with a small region of high density below and low density along the flanks, appeared to be responsible for extensive cracking, which could also cause problems in commercial tabletting

Silk Protein Solution : A Natural Example of Sticky Reptation

Silk is one of the most intriguing examples of biomolecular self-assembly, yet little is understood of molecular mechanisms behind the flow behavior generating these complex high-performance fibers. This work applies the polymer physics of entangled solution rheology to present a first microphysical understanding of silk in the linear viscoelastic regime. We show that silk solutions can be approximated as reptating polymers with "sticky" calcium bridges whose strength can be controlled through the potassium concentration. This approach provides a new window into critical microstructural parameters, in particular identifying the mechanism by which potassium and calcium ions are recruited as a powerful viscosity control in silk. Our model constitutes a viable starting point to understand not only the "flow-induced self-assembly" of silk fibers but also a broader range of phenomena in the emergent field of material-focused synthetic biology

Stretching of Bombyx mori Silk Protein in Flow

The flow-induced self-assembly of entangled Bombyx mori silk proteins is hypothesised to be aided by the ‘registration’ of aligned protein chains using intermolecularly interacting ‘sticky’ patches. This suggests that upon chain alignment, a hierarchical network forms that collectively stretches and induces nucleation in a precisely controlled way. Through the lens of polymer physics, we argue that if all chains would stretch to a similar extent, a clear correlation length of the stickers in the direction of the flow emerges, which may indeed favour such a registration effect. Through simulations in both extensional flow and shear, we show that there is, on the other hand, a very broad distribution of protein–chain stretch, which suggests the registration of proteins is not directly coupled to the applied strain, but may be a slow statistical process. This qualitative prediction seems to be consistent with the large strains (i.e., at long time scales) required to induce gelation in our rheological measurements under constant shear. We discuss our perspective of how the flow-induced self-assembly of silk may be addressed by new experiments and model development

Formulation and evaluation of floating mucoadhesive alginate beads for targetingHelicobacter pylori

Objectives: There are various obstacles in the eradication of Helicobacter.pylori (H. pylori) infections, including low antibiotic levels and poor accessibility of the drug at the site of the infection. This study describes the preparation and characterisation of novel floating-mucoadhesive alginate beads loaded with clarithromycin (CMN) for delivery to the gastric mucosa to improve the eradication of this micro-organism. Methods: Calcium alginate beads were prepared by ionotropic gelation. The formulation was modified through addition of oil and coating with chitosan in order to improve floating, mucoadhesion and modify drug release. Key findings: SEM confirmed the sphericity of the beads with X-ray microtomography (XμMT) showing the 3D structure of the beads with the layered internal structure of the bead and the even distribution of the drug within the bead. This formulation combined two gastro-retentive strategies and these formulations produced excellent in vitro floating, mucoadhesive and drug release characteristics. Enhanced stability of the beads in phosphate buffer raises a potential for the modified formulations to be targeted to regions of higher pH within the gastrointestinal tract with a higher pH. Drug release from these beads was sustained through an unstirred mucin layer simulating in vivo conditions under which the H. pylori resides in the gastric mucosa. Conclusions: This novel formulation will ensure retention for a longer period in the stomach than conventional formulations and control drug release, ensuring high local drug concentrations, leading to improved eradication of the bacteria

The Borrelia afzelii outer membrane protein BAPKO_0422 binds human Factor-H and is predicted to form a membrane-spanning beta-barrel

The deep evolutionary history of the Spirochetes places their branch point early in the evolution of the diderms, before the divergence of the present day Proteobacteria. As a Spirochete, the morphology of the Borrelia cell envelope shares characteristics of both Gram-positive and Gram-negative bacteria. A thin layer of peptidoglycan, tightly associated with the cytoplasmic membrane is surrounded by a more labile outer membrane (OM). This OM is rich in lipoproteins but with few known integral membrane proteins. The OmpA domain is an eight-stranded membrane-spanning β-barrel, highly conserved among the Proteobacteria but so far unknown in the Spirochetes. In the present work we describe the identification of four novel OmpA-like β-barrels from Borrelia afzelii, the most common cause of erythema migrans rash in Europe. Structural characterisation of one these proteins (BAPKO_0422) by small angle X-ray scattering (SAXS) and circular dichroism indicate a compact globular structure rich in β-strand consistent with a monomeric β-barrel. Ab initio molecular envelopes calculated from the scattering profile are consistent with homology models and demonstrate that BAPKO_0422 adopts a peanut shape with dimensions 25 x 45 Å. Deviations from the standard C-terminal signature sequence are apparent; in particular the C-terminal Phe residue commonly found in Proteobacterial OM proteins is replaced by Ile/Leu or Asn. BAPKO_0422 is demonstrated to bind human factor-H and therefore may contribute to immune evasion by inhibition of the complement response. Encoded by chromosomal genes, these proteins are highly conserved between Borrelia subspecies and may be of diagnostic or therapeutic value

Spidroin N-terminal domain forms amyloid-like fibril based hydrogels and provides a protein immobilization platform

Recombinant spider silks are of interest but the multimodal and aggregation-prone nature of them is a limitation. Here, the authors report on a miniature spidroin based on the N-terminal domain which forms a hydrogel at 37 degrees C which allows for ease of production and fusion protein modification to generate functional biomaterials.Recombinant spider silk proteins (spidroins) have multiple potential applications in development of novel biomaterials, but their multimodal and aggregation-prone nature have complicated production and straightforward applications. Here, we report that recombinant miniature spidroins, and importantly also the N-terminal domain (NT) on its own, rapidly form self-supporting and transparent hydrogels at 37 degrees C. The gelation is caused by NT alpha-helix to beta-sheet conversion and formation of amyloid-like fibrils, and fusion proteins composed of NT and green fluorescent protein or purine nucleoside phosphorylase form hydrogels with intact functions of the fusion moieties. Our findings demonstrate that recombinant NT and fusion proteins give high expression yields and bestow attractive properties to hydrogels, e.g., transparency, cross-linker free gelation and straightforward immobilization of active proteins at high density

Differential Cerebral Cortex Transcriptomes of Baboon Neonates Consuming Moderate and High Docosahexaenoic Acid Formulas

BACKGROUND: Docosahexaenoic acid (DHA, 22:6n-3) and arachidonic acid (ARA, 20:4n-6) are the major long chain polyunsaturated fatty acids (LCPUFA) of the central nervous system (CNS). These nutrients are present in most infant formulas at modest levels, intended to support visual and neural development. There are no investigations in primates of the biological consequences of dietary DHA at levels above those present in formulas but within normal breastmilk levels. METHODS AND FINDINGS: Twelve baboons were divided into three formula groups: Control, with no DHA-ARA; “L”, LCPUFA, with 0.33%DHA-0.67%ARA; “L3”, LCPUFA, with 1.00%DHA-0.67%ARA. All the samples are from the precentral gyrus of cerebral cortex brain regions. At 12 weeks of age, changes in gene expression were detected in 1,108 of 54,000 probe sets (2.05%), with most showing <2-fold change. Gene ontology analysis assigns them to diverse biological functions, notably lipid metabolism and transport, G-protein and signal transduction, development, visual perception, cytoskeleton, peptidases, stress response, transcription regulation, and 400 transcripts having no defined function. PLA2G6, a phospholipase recently associated with infantile neuroaxonal dystrophy, was downregulated in both LCPUFA groups. ELOVL5, a PUFA elongase, was the only LCPUFA biosynthetic enzyme that was differentially expressed. Mitochondrial fatty acid carrier, CPT2, was among several genes associated with mitochondrial fatty acid oxidation to be downregulated by high DHA, while the mitochondrial proton carrier, UCP2, was upregulated. TIMM8A, also known as deafness/dystonia peptide 1, was among several differentially expressed neural development genes. LUM and TIMP3, associated with corneal structure and age-related macular degeneration, respectively, were among visual perception genes influenced by LCPUFA. TIA1, a silencer of COX2 gene translation, is upregulated by high DHA. Ingenuity pathway analysis identified a highly significant nervous system network, with epidermal growth factor receptor (EGFR) as the outstanding interaction partner. CONCLUSIONS: These data indicate that LCPUFA concentrations within the normal range of human breastmilk induce global changes in gene expression across a wide array of processes, in addition to changes in visual and neural function normally associated with formula LCPUFA

Ultralight vector dark matter search using data from the KAGRA O3GK run

Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we present the result of a search for U(1)B−L gauge boson DM using the KAGRA data from auxiliary length channels during the first joint observation run together with GEO600. By applying our search pipeline, which takes into account the stochastic nature of ultralight DM, upper bounds on the coupling strength between the U(1)B−L gauge boson and ordinary matter are obtained for a range of DM masses. While our constraints are less stringent than those derived from previous experiments, this study demonstrates the applicability of our method to the lower-mass vector DM search, which is made difficult in this measurement by the short observation time compared to the auto-correlation time scale of DM

Structure and phase transitions of genipin, an herbal medicine and naturally occurring cross-linker

The naturally occurring cross-linking agent genipin has recently been the subject of biomedical research both in the creation of hydrogel structures and as a potential active agent in its own right. In this study several methods of specimen preparation were used to isolate and stabilize crystalline genipin material. The thermodynamic properties of the genipin crystals and their phase changes were investigated using differential scanning calorimetry techniques. Single crystal and powder X-ray diffraction (XRD) confirmed two separate polymorphic phases denoted form I and form II. The structures were resolved, and the XRD traces were indexed, and both forms were found to be monoclinic. Genipin forms I and II were also isolated through methanol evaporation crystallization. Form II was formed through this route when the crystallization was accompanied by polymerization of a fraction of the genipin. The materials were also tested under in situ heated, X-ray diffraction conditions at a synchrotron radiation source. Genipin forms I and II were shown to have melting temperatures of around 121 and 101 °C, respectively