Fundamental studies of the mechanism of catalytic reactions with catalysts effective in the gasification of carbon solids and the oxidative coupling of methane. Quarterly report, October 1, 1994--December 31, 1994

This report describes research on the oxidative coupling of methane and catalysts involved in coal gasification. Topics include methane pyrolysis and catalysts, and magnetic properties of the coal gasification catalyst Ca-Ni-K-O system

Steady-state and transient catalytic oxidation and coupling of methane

This project addresses the conversion of methane from natural gas into ethane, ethylene and higher hydrocarbons. Our research explores the mechanistic and practical implications of carrying out the methane oxidative coupling reaction in reactor designs other than conventional packed-beds with co-fed reactants. These alternate reactor designs are needed to prevent the full oxidation of methane, which limits C{sub 2}, yields in methane oxidative coupling reactions. The research strategy focuses on preventing contact between the 0{sub 2} reactant required for favorable overall thermodynamics and the C{sub 2+} products of methane coupling. The behavior of various reactor designs are simulated using detailed kinetic transport models. These simulations have suggested that the best way to prevent high C0{sub 2} yields is to separate the oxygen and hydrocarbon streams altogether. As a result, the project has focused on the experimental demonstration of proton transport membrane reactors for the selective conversion of methane into higher hydrocarbons

Identifying global synchronies in marine zooplankton populations: issues and opportunities

Analyses of the influences of climate variability on local zooplankton populations and those within ocean basins are relatively recent (past 5–10 years). What is lacking are comparisons of zooplankton population variability among the world's oceans, in contrast to such global comparisons of fish populations. This article examines the key questions, capabilities, and impediments for global comparisons of zooplankton populations using long-term (>10 year) data sets. The key question is whether global synchronies in zooplankton populations exist. If yes, then (i) to what extent are they driven by “bottom-up” (productivity) or “top-down” (predation) forcing; (ii) are they initiated by persistent forcing or by episodic events whose effects propagate through the system with different time-lags; and (iii) what proportion of the biological variance is caused directly by physical forcing and what proportion might be caused by non-linear instabilities in the biological dynamics (e.g. through trophodynamic links)? The capabilities are improving quickly that will enable global comparisons of zooplankton populations. Several long-term sampling programmes and data sets exist in many ocean basins, and the data are becoming more available. In addition, there has been a major philosophical change recently that now recognizes the value of continuing long-term zooplankton observation programmes. Understanding of life-history characteristics and the ecosystem roles of zooplankton are also improving. A first and critical step in exploring possible synchrony among zooplankton from geographically diverse regions is to recognize the limitations of the various data sets. There exist several impediments that must be surmounted before global comparisons of zooplankton populations can be realized. Methodological issues concerned with the diverse spatial and temporal scales of “monitored” planktonic populations are one example. Other problems include data access issues, structural constraints regarding funding of international comparisons, and lack of understanding by decision-makers of the value of zooplankton as indicators of ecosystem change. We provide recommendations for alleviating some of these impediments, and suggest a need for an easily understood example of global synchrony in zooplankton populations and the relation of those signals to large-scale climate drivers

Accounting for Dilution of SARS-CoV-2 in Wastewater Samples Using Physico-Chemical Markers

Most sewer networks collect domestic wastewater and a variable proportion of extraneous water, such as rainwater, through surface runoff and industrial discharges. Accounting for wastewater dilution is essential to properly quantify wastewater particle loads, whether these are molecular fragments of SARS-CoV-2, or other substances of interest such as illicit drugs or microplastics. This paper presents a novel method for obtaining real-time estimates of wastewater dilution and total daily volume through wastewater treatment works, namely when flow data is not available or unreliable. The approach considers the levels of several physico-chemical markers (ammonia, electrical conductivity, and orthophosphate) in the wastewater against their dry-weather levels. Using high-resolution data from the national Wastewater Surveillance Programme of Wales, we illustrate how the method is robust to spikes in markers and can recover peaks in wastewater flow measurements that may have been capped by hydraulic relief valves. We show the method proves effective in normalising SARS-CoV-2 viral loads in wastewater samples and discuss other applications for this method, looking at wastewater surveillance as a vital tool to monitor both human and environmental health

Neutron-induced prompt gamma activation analysis (PGAA) of metalsand non-metals in ocean floor geothermal vent-generated samples

Neutron-induced prompt gamma activation analysis (PGAA) hasbeen used to analyze ocean floor geothermal vent-generated samples thatare composed of mixed metal sulfides, silicates, and aluminosilicates.The modern application of the PGAA technique is discussed, and elementalanalytical results are given for 25 elements observed in the samples. Theelemental analysis of the samples is consistent with the expectedmineralogical compositions, and very consistent results are obtained forcomparable samples. Special sensitivity to trace quantities of hydrogen,boron, cadmium, dysprosium, gadolinium, and samarium isdiscussed

Thinking about growth : a cognitive mapping approach to understanding small business development

School of Managemen

Prompt gamma activation analysis (PGAA) and short-lived neutron activation analysis (NAA) applied to the characterization of legacy materials

Without quality historical records that provide the composition of legacy materials, the elemental and/or chemical characterization of such materials requires a manual analytical strategy that may expose the analyst to unknown toxicological hazards. In addition, much of the existing legacy inventory also incorporates radioactivity, and, although radiological composition may be determined by various nuclear-analytical methods, most importantly, gamma-spectroscopy, current methods of chemical characterization still require direct sample manipulation, thereby presenting special problems with broad implications for both the analyst and the environment. Alternately, prompt gamma activation analysis (PGAA) provides a'single-shot' in-situ, non-destructive method that provides a complete assay of all major entrained elemental constituents.1-3. Additionally, neutron activation analysis (NAA) using short-lived activation products complements PGAA and is especially useful when NAA activation surpasses the PGAA in elemental sensitivity

Electronic structure of CaCuO2 from the B3LYP hybrid density functional

Published versio

Comparison of soft and hard tissue ablation with sub-ps and ns pulse lasers

Tissue ablation with ultrashort laser pulses offers several unique advantages. The nonlinear energy deposition is insensitive to tissue type, allowing this tool to be used for soft and hard tissue ablation. The localized energy deposition lead to precise ablation depth and minimal collateral damage. This paper reports on efforts to study and demonstrate tissue ablation using an ultrashort pulse laser. Ablation efficiency and extent of collateral damage for 0.3 ps and 1000 ps duration laser pulses are compared. Temperature measurements of the rear surface of a tooth section is also presented

Cherenkov radiation emitted by ultrafast laser pulses and the generation of coherent polaritons

We report on the generation of coherent phonon polaritons in ZnTe, GaP and LiTaO$_{3}$ using ultrafast optical pulses. These polaritons are coupled modes consisting of mostly far-infrared radiation and a small phonon component, which are excited through nonlinear optical processes involving the Raman and the second-order susceptibilities (difference frequency generation). We probe their associated hybrid vibrational-electric field, in the THz range, by electro-optic sampling methods. The measured field patterns agree very well with calculations for the field due to a distribution of dipoles that follows the shape and moves with the group velocity of the optical pulses. For a tightly focused pulse, the pattern is identical to that of classical Cherenkov radiation by a moving dipole. Results for other shapes and, in particular, for the planar and transient-grating geometries, are accounted for by a convolution of the Cherenkov field due to a point dipole with the function describing the slowly-varying intensity of the pulse. Hence, polariton fields resulting from pulses of arbitrary shape can be described quantitatively in terms of expressions for the Cherenkov radiation emitted by an extended source. Using the Cherenkov approach, we recover the phase-matching conditions that lead to the selection of specific polariton wavevectors in the planar and transient grating geometry as well as the Cherenkov angle itself. The formalism can be easily extended to media exhibiting dispersion in the THz range. Calculations and experimental data for point-like and planar sources reveal significant differences between the so-called superluminal and subluminal cases where the group velocity of the optical pulses is, respectively, above and below the highest phase velocity in the infrared.Comment: 13 pages, 11 figure