Cost-effective fabrication of photopolymer molds with multi-level microstructures for pdms microfluidic device manufacture

This paper describes a methodology of photopolymer mold fabrication with multi-level microstructures for polydimethylsiloxane (PDMS) microfluidic device manufacture. Multi-level microstructures can be performed by varying UVA exposure time and channel width. Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and profilometry techniques have been employed to characterize the molds. Multiple molds with multi-level microstructures can be formed in a unique piece. Overall height/depth of the structures reaches up to 677 μm and a minimum of 21 μm. The method provides several advantages such as reduction of fabrication time, multiple structures with diverse topologies, a great variety of depth and height in a single mold and low cost of fabrication. The effectiveness of multi-level microstructure fabrication was evaluated by constructing PDMS microfluidic devices for cell culture and proliferation.Fil: Olmos Carreno, Carol Maritza. Universidad Tecnológica Nacional. Facultad Regional Haedo; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Penãherrera, Ana. Universidad Tecnológica Nacional. Facultad Regional Haedo; Argentina. Albert Ludwigs University of Freiburg; AlemaniaFil: Rosero Yánez, Gustavo Ivan. Universidad Tecnológica Nacional. Facultad Regional Haedo; Argentina. Albert Ludwigs University of Freiburg; Alemania. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Vizuete, Karla. Universidad de Las Fuerzas Armadas; EcuadorFil: Ruarte, Darío. Albert Ludwigs University of Freiburg; AlemaniaFil: Follo, Marie. Albert Ludwigs University of Freiburg; AlemaniaFil: Vaca Mora, Andrea Vanessa. Universidad Tecnológica Nacional. Facultad Regional Haedo; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Arroyo, Carlos R.. Universidad de Las Fuerzas Armadas; EcuadorFil: Debut, Alexis. Universidad de Las Fuerzas Armadas; EcuadorFil: Cumbal Flores, Luis. Universidad de Las Fuerzas Armadas; EcuadorFil: Perez, Maximiliano Sebastian. Universidad Tecnológica Nacional. Facultad Regional Haedo; Argentina. Florida International University; Estados Unidos. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Lerner, Betiana. Universidad Tecnológica Nacional. Facultad Regional Haedo; Argentina. Florida International University; Estados Unidos. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Mertelsmann, Roland. Albert Ludwigs University of Freiburg; Alemani

Epoxy resin mold and PDMS microfluidic devices through photopolymer flexographic printing plate

Photopolymer flexographic printing plate is a new photopolymeric material used for microdevices fabrication. This work demonstrates that a photopolymer flexographic master mold can be used for the fabrication of PDMS (polydimethylsiloxane) microdevices by a multi-step manufacturing process. The methodology entails three main fabrication steps: (1) a photopolymer flexographic printing plate mold (FMold) is generated by UV exposure through a transparent film, (2) an epoxy resin mold (ERmold) is fabricated by transferring the features of the photopolymer mold and (3) a PDMS microdevice is manufactured from the epoxy resin mold. The characterization of the manufactured PDMS microdevices was performed using scanning electron microscopy (SEM) and profilometry. Results showed high accuracy in the replication of the profiles. To show the feasibility of the fabrication process a microdevice for microdroplet generation was designed, manufactured and tested. Hence, the manufacturing process described in this work provides an easy, robust, and low-cost strategy that facilitates the scaling-up of microfluidic devices without requiring any sophisticated equipment.Fil: Olmos Carreno, Carol Maritza. Universidad Tecnológica Nacional. Facultad Regional Haedo; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Vaca Mora, Andrea Vanessa. Universidad Tecnológica Nacional. Facultad Regional Haedo; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Rosero, Gustavo. Universidad Tecnológica Nacional. Facultad Regional Haedo; ArgentinaFil: Peñaherrera Pazmiño, Ana Belén. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Tecnológica Nacional. Facultad Regional Haedo; ArgentinaFil: Pérez Sosa, Camilo José. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Tecnológica Nacional. Facultad Regional Haedo; ArgentinaFil: de Sá Carneiro, Igor. Universidad Tecnológica Nacional. Facultad Regional Haedo; ArgentinaFil: Vizuete, Karla. Universidad de Las Fuerzas Armadas Espe; EcuadorFil: Arroyo, Carlos R.. Universidad de Las Fuerzas Armadas; EcuadorFil: Debut, Alexis. Universidad de Las Fuerzas Armadas; EcuadorFil: Perez, Maximiliano Sebastian. Universidad Tecnológica Nacional. Facultad Regional Haedo; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ingeniería. Instituto de Ingeniería Biomédica; ArgentinaFil: Cumbal, Luis. Universidad de Las Fuerzas Armadas; EcuadorFil: Lerner, Betiana. Universidad de Buenos Aires. Facultad de Ingeniería. Instituto de Ingeniería Biomédica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Tecnológica Nacional. Facultad Regional Haedo; Argentin

Mechanosynthesis of MFe 2

Adsorption of Pb(II) from aqueous solution using MFe2O4 nanoferrites (M = Co, Ni, and Zn) was studied. Nanoferrite samples were prepared via the mechanochemical method and were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), micro-Raman, and vibrating sample magnetometry (VSM). XRD analysis confirms the formation of pure single phases of cubic ferrites with average crystallite sizes of 23.8, 19.4, and 19.2 nm for CoFe2O4, NiFe2O4, and ZnFe2O4, respectively. Only NiFe2O4 and ZnFe2O4 samples show superparamagnetic behavior at room temperature, whereas CoFe2O4 is ferromagnetic. Kinetics and isotherm adsorption studies for adsorption of Pb(II) were carried out. A pseudo-second-order kinetic describes the sorption behavior. The experimental data of the isotherms were well fitted to the Langmuir isotherm model. The maximum adsorption capacity of Pb(II) on the nanoferrites was found to be 20.58, 17.76, and 9.34 mg·g−1 for M = Co, Ni, and Zn, respectively

A comprehensive overview of radioguided surgery using gamma detection probe technology

The concept of radioguided surgery, which was first developed some 60 years ago, involves the use of a radiation detection probe system for the intraoperative detection of radionuclides. The use of gamma detection probe technology in radioguided surgery has tremendously expanded and has evolved into what is now considered an established discipline within the practice of surgery, revolutionizing the surgical management of many malignancies, including breast cancer, melanoma, and colorectal cancer, as well as the surgical management of parathyroid disease. The impact of radioguided surgery on the surgical management of cancer patients includes providing vital and real-time information to the surgeon regarding the location and extent of disease, as well as regarding the assessment of surgical resection margins. Additionally, it has allowed the surgeon to minimize the surgical invasiveness of many diagnostic and therapeutic procedures, while still maintaining maximum benefit to the cancer patient. In the current review, we have attempted to comprehensively evaluate the history, technical aspects, and clinical applications of radioguided surgery using gamma detection probe technology

Evaluation of appendicitis risk prediction models in adults with suspected appendicitis

Background Appendicitis is the most common general surgical emergency worldwide, but its diagnosis remains challenging. The aim of this study was to determine whether existing risk prediction models can reliably identify patients presenting to hospital in the UK with acute right iliac fossa (RIF) pain who are at low risk of appendicitis. Methods A systematic search was completed to identify all existing appendicitis risk prediction models. Models were validated using UK data from an international prospective cohort study that captured consecutive patients aged 16–45 years presenting to hospital with acute RIF in March to June 2017. The main outcome was best achievable model specificity (proportion of patients who did not have appendicitis correctly classified as low risk) whilst maintaining a failure rate below 5 per cent (proportion of patients identified as low risk who actually had appendicitis). Results Some 5345 patients across 154 UK hospitals were identified, of which two‐thirds (3613 of 5345, 67·6 per cent) were women. Women were more than twice as likely to undergo surgery with removal of a histologically normal appendix (272 of 964, 28·2 per cent) than men (120 of 993, 12·1 per cent) (relative risk 2·33, 95 per cent c.i. 1·92 to 2·84; P < 0·001). Of 15 validated risk prediction models, the Adult Appendicitis Score performed best (cut‐off score 8 or less, specificity 63·1 per cent, failure rate 3·7 per cent). The Appendicitis Inflammatory Response Score performed best for men (cut‐off score 2 or less, specificity 24·7 per cent, failure rate 2·4 per cent). Conclusion Women in the UK had a disproportionate risk of admission without surgical intervention and had high rates of normal appendicectomy. Risk prediction models to support shared decision‐making by identifying adults in the UK at low risk of appendicitis were identified

Performance analysis of an OLS STOLAS node and its scalability

In this paper we studied the performance of an STOLAS project based node switching an FSK/IM modulated signal. A simulation model for 10Gbit/s IM modulated payload FSK labelled at 155Mbit/s, of an optical label switching node, has been developed. The performance of a single node, the effect of the crosstalk between channels and the impact of the extinction ratio value of the IM signal on the overall performance are analyzed. Also the main limitations to the efficiency of the switching are described. The scalability of a network using this system model is studied from the viewpoint of the cascadable number of nodes

A plant economics spectrum in Mediterranean forests along environmental gradients: is there coordination among leaf, stem and root traits?

Questions: Is there any evidence of coordination among leaf, stem and root traits, and thereby of the existence of a plant economics spectrum at the species and community level in Mediterranean forests? Are these traits related to plant size and seedmass? Location: Mediterranean forests and shrublands, Sierra Morena mountains, Cordoba, southern Spain. Methods: We selected nine woody plant communities along a natural local gradient of soil water and nutrient availability. We measured key leaf, stem, root and whole-plant traits for 38 dominant woody plant species. The variation across species of 15 functional traits (of the leaf, stem and root) was analysed and coordination among them was tested. We explored the relationships between these traits (hereafter ‘resource-use traits’ due to their close association with the acquisition–conservation trade-off) and plant height and seed mass. Finally, we compared results at species level with those calculated at community level, considering community-weightedmeans (CWMs). Results: We found a significant coordination between traits belonging to different plant organs, and propose the existence of a plant economics spectrum in Mediterranean forests along the environmental gradient. However,weaker relationships were found within groups of species under similar environmental conditions. We did not find the expected orthogonal relationships between plant height, seed mass and resource-use traits. Relationships among functional traits were stronger at the community level than at the species level. Conclusions: This study reveals a high degree of functional coordination between traits belonging to different plant organs at both species and community level, and suggests the existence of a plant economics spectrum across 38 Mediterranean woody plant species. However, this general trend of functional coordination between organs became weaker or disappeared when considering restricted groups of species belonging to environmentally similar sites (e.g. dry vs wet sites), suggesting that the diversification of strategies within communities is not related to the economics spectrum at a lower spatial scale. Interestingly, the high degree of coordination between resource-use traits and seed mass at the community level seems to support the tolerance–fecundity model, which predicts an inverse relationship between fecundity and stress tolerance