RF Characterisation of Laser Treated Copper Surfaces for the Mitigation of Electron Cloud in Accelerators

In accelerator beam chambers and RF waveguides, electron cloud and multipacting can be mitigated effectively by reducing the secondary electron yield (SEY). In recent years, it has been established that laser-engineered surface structuring is a very efficient method to create a copper surface with a SEY maximum close to or even below unity. Different laser pulse durations, from nanoseconds to picoseconds, can be used to change surface morphology. Conversely, the characteristics that minimise the SEY, such as the moderately deep grooves and the redeposited nanoparticles, might have unfavourable consequences, including increased RF surface resistance. In this study, we describe the techniques used to measure the surface resistance of laser-treated copper samples using an enhanced dielectric resonator with 12 cm diameter sample sizes operating in the GHz range. The quantification basis lies in a non-contact measurement of the high-frequency losses, focusing on understanding the variation of surface resistance levels depending on the specifics of the treatment and possible post-treatment cleaning procedures.</p

RF Characterisation of Laser Treated Copper Surfaces for the Mitigation of Electron Cloud in Accelerators

In accelerator beam chambers and RF waveguides, electron cloud and multipacting can be mitigated effectively by reducing the secondary electron yield (SEY). In recent years, it has been established that laser-engineered surface structuring is a very efficient method to create a copper surface with a SEY maximum close to or even below unity. Different laser pulse durations, from nanoseconds to picoseconds, can be used to change surface morphology. Conversely, the characteristics that minimise the SEY, such as the moderately deep grooves and the redeposited nanoparticles, might have unfavourable consequences, including increased RF surface resistance. In this study, we describe the techniques used to measure the surface resistance of laser-treated copper samples using an enhanced dielectric resonator with 12 cm diameter sample sizes operating in the GHz range. The quantification basis lies in a non-contact measurement of the high-frequency losses, focusing on understanding the variation of surface resistance levels depending on the specifics of the treatment and possible post-treatment cleaning procedures.</p

Effect of strain rate on tensile mechanical properties of high-purity niobium single crystals for SRF applications

An investigation of the mechanical properties of high-purity niobium single crystals is presented. Specimens were cut with different crystallographic orientations from a large grain niobium disk and uniaxial tensile tests were conducted at strain rates between 10-4 and 103 s-1. The logarithmic strain rate sensitivity for crystals oriented close to the center of a tensile axis inverse pole figure (IPF) is ~0.14 for all strain rates. The strain at failure (ranging from 0.4 to 0.9) is very sensitive to crystal orientation and maximal at ~10-2 s-1 for crystals oriented close to the center of an IPF. The high anisotropy observed at quasi-static strain rates decreased with increasing strain rate. The activation of multiple slip systems in the dynamic tests could account for this reduction in anisotropy. A transition from strain hardening to softening in the plastic domain was observed at strain rates greater than approximately 6 × 10-2 s-1 for crystals oriented close to the center of a tensile axis IPF. Shear bands were observed in specimens with orientations having similarly high Schmid factors on both {110} and {112} slip families, and they are correlated with reduced ductility. Crystal rotations at fracture are compared for the different orientations using scanning electron microscopy images and EBSD orientation maps. A rotation toward the terminal stable [101] orientation was measured for the majority of specimens (with tensile axes more than ~17° from the [001] direction) at strain rates between 1.28 × 10-2 and 1000 s-1.The authors would like to acknowledge the work of CERN's Materials, Metrology and Non-Destructive Testing (EN-MME-MM) section for granting access to their equipment for specimen preparation and scanning electron microscope (SEM) analyses. The authors would also like to thank Mr. Larry Vladic of Elite Motion LLC for lending us the high-speed camera during the high strain rate tests performed ASU. This Marie Sklodowska-Curie Action (MSCA) Innovative Training Network (ITN) receives funding from the European Union's H2020 Framework Programme under grant agreement no. 764879. T.R. Bieler, D. Kang, E. Pai Kulyadi, P. Eisenlohr, C. Kale, and K.N. Solanki acknowledge support from DOE/OHEP grant DE-SC0009962

Investigation on different materials after pulsed high field conditioning and low-energy H- irradiation

During operation, the radio-frequency quadrupole (RFQ) of the LINAC4 at CERN is exposed to high electric fields, which can lead to vacuum breakdown. It is also subject to beam loss, which can cause surface modification, including blistering, which can result in reduced electric field holding and an increased breakdown rate. First, experiments to study the high-voltage conditioning process and electrical breakdown statistics have been conducted using pulsed high-voltage DC systems in order to identify materials with high electric field handling capability and robustness to low-energy irradiation. In this paper, we discuss the results obtained for the different materials tested. To complement these, an investigation of their metallurgical properties using advanced microscopic techniques was done to observe and characterize the different materials and to compare results before and after irradiation and breakdown testing

The Compact Linear Collider (CLIC) - 2018 Summary Report

The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years

Electro-mechanical characterization of MgB2 wires for the Superconducting Link Project at CERN

In previous years, the R & D program between CERN and Columbus Superconductors SpA led to the development of several configurations of MgB2 wires. The aim was to achieve excellent superconducting properties in high-current MgB2 cables for the HL-LHC upgrade. In addition to good electrical performance, the superconductor shall have good mechanical strength in view of the stresses during operation (Lorenz forces and thermal contraction) and handling (tension and bending) during cabling and installation at room temperature. Thus, the study of the mechanical properties of MgB2 wires is crucial for the cable design and its functional use. In the present work we report on the electro-mechanical characterization of ex situ processed composite MgB2 wires. Tensile tests (critical current versus strain) were carried out at 4.2 K and in a 3 T external field by means of a purpose-built bespoke device to determine the irreversible strain limit of the wire. The minimum bending radius of the wire was calculated taking into account the dependence of the critical current with the strain and it was then used to obtain the minimum twist pitch of MgB2 wires in the cable. Strands extracted from cables having different configurations were tested to quantify the critical current degradation. The Young's modulus of the composite wire was measured at room temperature. Finally, all measured mechanical parameters will be used to optimize an 18-strand MgB2 cable configuration

Improved film density for coatings at grazing angle of incidence in high power impulse magnetron sputtering with positive pulse

The production of a dense and void-free thin film on large and complex substrates is still a challenge in Physical Vapor Deposition. High Power Impulse Magnetron Sputtering (HiPIMS) with voltage inversion (positive pulse) after the main negative pulse is an attractive alternative to a negatively biased substrate to improve the film properties. In this manuscript, the properties of Nb thin-films deposited on flat Cu samples at different incidence angles with respect to the sputtered Nb target are investigated for various coating techniques. In particular, the results obtained using HiPIMS with the application of a positive voltage are compared with those resulting from negatively biased substrates, using as a reference films coated with the consolidated technique of Direct Current Magnetron Sputtering. Images of the film cross section obtained with a Focused Ion Beam - Scanning Electron Microscope enable to assess film morphology and local thickness, which is compared with the value obtained from X-ray Fluorescence measurements. Differences in the film morphology are highlighted for samples placed perpendicularly to the surface of the sputtered target. A significant densification for HiPIMS in the presence of a positive pulse is observed. The application of this approach to the coatings of superconducting radio-frequency cavities is discussed

Electrodeposition of copper applied to the manufacture of seamless superconducting rf cavities

Niobium thin film coated copper superconducting radio frequency elliptical cavities have demonstrated for many years their strong potential as an alternative to bulk niobium cavities. The thin film lower performance at high rf field is often attributed to the defects observed in the elaborated Nb layer, sometimes originated from defects inherited from the substrate itself. The currently used methods of manufacturing the copper elliptical substrates include several steps of electron-beam welding in order to join the half cells and the cutoffs which can contribute to defects and porosities. Seamless methods are nowadays developed in order to avoid welding steps and to decrease the global manufacturing cost of the cavities. We propose in this study an innovative alternative route in which the cavity is formed by electrodeposition of copper on a sacrificial aluminum mandrel. The strength of the process relies on the total absence of welding joints. Two different electroforming techniques using either direct current or pulsed plating have been investigated. The electroformed copper exhibited similar mechanical robustness, cryogenic properties and purity as the oxygen-free copper. In addition, the fabrication process was validated on test mandrels which mimic the geometry of 1.3 GHz cavities