Optimisation of Offshore Wind Farms Using a Genetic Algorithm

A modular framework for the optimisation of an offshore wind farm using a discrete genetic algorithm is presented. This approach uses a bespoke grid generation algorithm to define the discrete positions that turbines may occupy thereby implicitly satisfying navigational and search and rescue constraints through the wind farm. The presented methodology takes a holistic approach optimising both the turbine placement and inter-array cable network, while minimising the levelised cost of energy and satisfying real world constraints. This tool therefore integrates models for the assessment of the energy production including wake losses; the optimisation of the inter-array cables; and the estimation of costs of the project over the lifetime. This framework will allow alternate approaches to wake and cost modelling as well as optimisation to be benchmarked in the future

Impact of particles on the Planck HFI detectors: Ground-based measurements and physical interpretation

The Planck High Frequency Instrument (HFI) surveyed the sky continuously from August 2009 to January 2012. Its noise and sensitivity performance were excellent, but the rate of cosmic ray impacts on the HFI detectors was unexpectedly high. Furthermore, collisions of cosmic rays with the focal plane produced transient signals in the data (glitches) with a wide range of characteristics. A study of cosmic ray impacts on the HFI detector modules has been undertaken to categorize and characterize the glitches, to correct the HFI time-ordered data, and understand the residual effects on Planck maps and data products. This paper presents an evaluation of the physical origins of glitches observed by the HFI detectors. In order to better understand the glitches observed by HFI in flight, several ground-based experiments were conducted with flight-spare HFI bolometer modules. The experiments were conducted between 2010 and 2013 with HFI test bolometers in different configurations using varying particles and impact energies. The bolometer modules were exposed to 23 MeV protons from the Orsay IPN TANDEM accelerator, and to $^{241}$Am and $^{244}$Cm $\alpha$-particle and $^{55}$Fe radioactive X-ray sources. The calibration data from the HFI ground-based preflight tests were used to further characterize the glitches and compare glitch rates with statistical expectations under laboratory conditions. Test results provide strong evidence that the dominant family of glitches observed in flight are due to cosmic ray absorption by the silicon die substrate on which the HFI detectors reside. Glitch energy is propagated to the thermistor by ballistic phonons, while there is also a thermal diffusion contribution. The implications of these results for future satellite missions, especially those in the far-infrared to sub-millimetre and millimetre regions of the electromagnetic spectrum, are discussed.Comment: 11 pages, 13 figure

Design and construction of a Cherenkov imager for charge measurement of nuclear cosmic rays

A proximity focusing Cherenkov imager called CHERCAM, has been built for the charge measurement of nuclear cosmic rays with the CREAM instrument. It consists of a silica aerogel radiator plane across from a detector plane equipped with 1,600 1" diameter photomultipliers. The two planes are separated by a ring expansion gap. The Cherenkov light yield is proportional to the charge squared of the incident particle. The expected relative light collection accuracy is in the few percents range. It leads to an expected single element separation over the range of nuclear charge Z of main interest 1 < Z < 26. CHERCAM is designed to fly with the CREAM balloon experiment. The design of the instrument and the implemented technical solutions allowing its safe operation in high altitude conditions (radiations, low pressure, cold) are presented.Comment: 24 pages, 19 figure

Pattern and process in Amazon tree turnover, 1976-2001

Previous work has shown that tree turnover, tree biomass and large liana densities have increased in mature tropical forest plots in the late twentieth century. These results point to a concerted shift in forest ecological processes that may already be having significant impacts on terrestrial carbon stocks, fluxes and biodiversity. However, the findings have proved controversial, partly because a rather limited number of permanent plots have been monitored for rather short periods. The aim of this paper is to characterize regional-scale patterns of 'tree turnover' (the rate with which trees die and recruit into a population) by using improved datasets now available for Amazonia that span the past 25 years. Specifically, we assess whether concerted changes in turnover are occurring, and if so whether they are general throughout the Amazon or restricted to one region or environmental zone. In addition, we ask whether they are driven by changes in recruitment, mortality or both. We find that: (i) trees 10 cm or more in diameter recruit and die twice as fast on the richer soils of southern and western Amazonia than on the poorer soils of eastern and central Amazonia; (ii) turnover rates have increased throughout Amazonia over the past two decades; (iii) mortality and recruitment rates have both increased significantly in every region and environmental zone, with the exception of mortality in eastern Amazonia; (iv) recruitment rates have consistently exceeded mortality rates; (v) absolute increases in recruitment and mortality rates are greatest in western Amazonian sites; and (vi) mortality appears to be lagging recruitment at regional scales. These spatial patterns and temporal trends are not caused by obvious artefacts in the data or the analyses. The trends cannot be directly driven by a mortality driver (such as increased drought or fragmentation-related death) because the biomass in these forests has simultaneously increased. Our findings therefore indicate that long-acting and widespread environmental changes are stimulating the growth and productivity of Amazon forests

Impact of foot-and-mouth disease on mastitis and culling on a large-scale dairy farm in Kenya

Foot and mouth disease (FMD) is a highly transmissible viral infection of cloven hooved animals associated with severe economic losses when introduced into FMD-free countries. Information on the impact of the disease in FMDV-endemic countries is poorly characterised yet essential for the prioritisation of scarce resources for disease control programmes. A FMD (virus serotype SAT2) outbreak on a large-scale dairy farm in Nakuru County, Kenya provided an opportunity to evaluate the impact of FMD on clinical mastitis and culling rate. A cohort approach followed animals over a 12-month period after the commencement of the outbreak. For culling, all animals were included; for mastitis, those over 18 months of age. FMD was recorded in 400/644 cattle over a 29-day period. During the follow-up period 76 animals were culled or died whilst in the over 18 month old cohort 63 developed clinical mastitis. Hazard ratios (HR) were generated using Cox regression accounting for non-proportional hazards by inclusion of time-varying effects. Univariable analysis showed FMD cases were culled sooner but there was no effect on clinical mastitis. After adjusting for possible confounders and inclusion of time-varying effects there was weak evidence to support an effect of FMD on culling (HR = 1.7, 95% confidence intervals [CI] 0.88-3.1, P = 0.12). For mastitis, there was stronger evidence of an increased rate in the first month after the onset of the outbreak (HR = 2.9, 95%CI 0.97-8.9, P = 0.057)

Improved annotation of 3' untranslated regions and complex loci by combination of strand-specific direct RNA sequencing, RNA-seq and ESTs

The reference annotations made for a genome sequence provide the framework for all subsequent analyses of the genome. Correct annotation is particularly important when interpreting the results of RNA-seq experiments where short sequence reads are mapped against the genome and assigned to genes according to the annotation. Inconsistencies in annotations between the reference and the experimental system can lead to incorrect interpretation of the effect on RNA expression of an experimental treatment or mutation in the system under study. Until recently, the genome-wide annotation of 3-prime untranslated regions received less attention than coding regions and the delineation of intron/exon boundaries. In this paper, data produced for samples in Human, Chicken and A. thaliana by the novel single-molecule, strand-specific, Direct RNA Sequencing technology from Helicos Biosciences which locates 3-prime polyadenylation sites to within +/- 2 nt, were combined with archival EST and RNA-Seq data. Nine examples are illustrated where this combination of data allowed: (1) gene and 3-prime UTR re-annotation (including extension of one 3-prime UTR by 5.9 kb); (2) disentangling of gene expression in complex regions; (3) clearer interpretation of small RNA expression and (4) identification of novel genes. While the specific examples displayed here may become obsolete as genome sequences and their annotations are refined, the principles laid out in this paper will be of general use both to those annotating genomes and those seeking to interpret existing publically available annotations in the context of their own experimental dataComment: 44 pages, 9 figure

Inheritance of an Epigenetic Mark: The CpG DNA Methyltransferase 1 Is Required for De Novo Establishment of a Complex Pattern of Non-CpG Methylation

Site-specific methylation of cytosines is a key epigenetic mark of vertebrate DNA. While a majority of the methylated residues are in the symmetrical (meC)pG:Gp(meC) configuration, a smaller, but significant fraction is found in the CpA, CpT and CpC asymmetric (non-CpG) dinucleotides. CpG methylation is reproducibly maintained by the activity of the DNA methyltransferase 1 (Dnmt1) on the newly replicated hemimethylated substrates (meC)pG:GpC. On the other hand, establishment and hereditary maintenance of non-CpG methylation patterns have not been analyzed in detail. We previously reported the occurrence of site- and allele-specific methylation at both CpG and non-CpG sites. Here we characterize a hereditary complex of non-CpG methylation, with the transgenerational maintenance of three distinct profiles in a constant ratio, associated with extensive CpG methylation. These observations raised the question of the signal leading to the maintenance of the pattern of asymmetric methylation. The complete non-CpG pattern was reinstated at each generation in spite of the fact that the majority of the sperm genomes contained either none or only one methylated non-CpG site. This observation led us to the hypothesis that the stable CpG patterns might act as blueprints for the maintenance of non-CpG DNA methylation. As predicted, non-CpG DNA methylation profiles were abrogated in a mutant lacking Dnmt1, the enzymes responsible for CpG methylation, but not in mutants defective for either Dnmt3a or Dnmt2

The Tilburg double blind randomised controlled trial comparing inguinal hernia repair according to Lichtenstein and the transinguinal preperitoneal technique

<p>Abstract</p> <p>Background</p> <p>Anterior open treatment of the inguinal hernia with a tension free mesh has reduced the incidence of recurrence and direct postoperative pain. The Lichtenstein procedure rules nowadays as reference technique for hernia treatment. Not recurrences but chronic pain is the main postoperative complication in inguinal hernia repair after Lichtenstein's technique. Preliminary experiences with a soft mesh placed in the preperitoneal space showed good results and less chronic pain.</p> <p>Methods</p> <p>The TULIP is a double-blind randomised controlled trial in which 300 patients will be randomly allocated to anterior inguinal hernia repair according to Lichtenstein or the transinguinal preperitoneal technique with soft mesh. All unilateral primary inguinal hernia patients eligible for operation who meet inclusion criteria will be invited to participate in this trial. The primary endpoint will be direct postoperative- and chronic pain. Secondary endpoints are operation time, postoperative complications, hospital stay, costs, return to daily activities (e.g. work) and recurrence. Both groups will be evaluated.</p> <p>Success rate of hernia repair and complications will be measured as safeguard for quality.</p> <p>To demonstrate that inguinal hernia repair according to the transinguinal preperitoneal (TIPP) technique reduces postoperative pain to <10%, with α = 0,05 and power 80%, a total sample size of 300 patients was calculated.</p> <p>Discussion</p> <p>The TULIP trial is aimed to show a reduction in postoperative chronic pain after anterior hernia repair according to the transinguinal preperitoneal (TIPP) technique, compared to Lichtenstein.</p> <p>In our hypothesis the TIPP technique reduces chronic pain compared to Lichtenstein.</p> <p>Trial registration</p> <p>ISRCTN 93798494</p

Выращивание из поликристаллического кремния солнечного качества квазимонокристаллических (mono-like) слитков методом направленной кристаллизации

In the frame of permanent objective to increase solar cell efficiency and to decrease production cost the monolike ingot process was designed which combine multicrystalline (mc) productivity and monocrystalline structure performances. As a raw material the mc-Solar Grade silicon (SoG-Si) was used because it is less expensive than the Si purified by gas chemical route (Siemens process or equivalent), Usage of the mc-SoG-Si for growing silicon ingots by monolike process should contribute to the ingot and wafer manufacturing cost decrease. SoG silicon using would be developed all the more fast since it enables to produce high efficiency solar cells. It is why the monolike process have been tested and optimized for Kazakhstan mc-SoG silicon. The objective of this work was study of the higher level content impurities influences on the crystal defect generation (mainly dislocations) of the monocrystalline structure. Visual monocrystalline structure, minority carrier lifetime mapping, and photoluminescence techniques were used to study the monolike ingots obtained from Kazakhstan’s mc-SoG silicon.В целях повышения эффективности солнечных элементов и снижение затрат на производство разработан процесс получения слитков кремния, по так называемой mono-like-технологии. Mono-like-процесс предназначен для получения монокристаллических слитков при использовании технологии производства мультикристаллического кремния (МК-Si). При этом в качестве сырья используют поликристаллический кремний (ПК-Si) «солнечного» качества (solar grade — SoG), технология получения которого является менее затратной, чем очистка кремния газохимическим процессом (Сименс-процесс или его эквивалент). Использование ПК-Si SoG для выращивания слитков по mono-like технологии должно способствовать снижению затрат на получение слитков и пластин. Новые технологии производства солнечных элементов, использующие ПК-Si SoG, разрабатываются быстрыми темпами, так как это позволяет производить при меньших затратах солнечные элементы с достаточно высоким КПД. Именно поэтому mono-like-процесс апробирован и оптимизирован для казахстанского ПК-Si SoG. Изучено влияние более высокой концентрации примесей в ПК-Si SoG на образование кристаллических дефектов (главным образом дислокаций) в монокристаллических структурах. Для исследования свойств mono-like слитка, полученного в промышленных масштабах из казахстанского ПК-Si SoG, использованы визуализация монокристаллической структуры, картирование времени жизни неосновных носителей заряда и фотолюминесценция