36 research outputs found
Data-driven Modeling of Building Consumption Profile for Optimal Flexibility: Application to Energy Intensive Industry
International audienceDespite the vast research on the flexibility of buildings consumption, current literature is more about predicting the impacts of energy flexibility than fo-cusing on its modeling. In this paper, a methodology is provided to go from data-driven modeling of the load consumption to an optimization problem with a Mixed-Integer Linear Programming (MILP) formulation. Illustrated on an Energy Intensive Industries (EII) with an economic point of view, the methodology is suitable for any consumption site, allowing optimal energy planning studies at the district scale. Thus, it facilitates the definition of flexibility strategies to exploit the complementary of uses of the districts
Submillimeter and Far-InfraRed Experiment (SAFIRE): A PI class instrument for SOFIA
SAFIRE is a versatile imaging Fabry-Perot spectrograph covering 145 to 655
microns, with spectral resolving powers ranging over 5-10,000. Selected as a
"PI" instrument for the airborne Stratospheric Observatory for Infrared
Astronomy (SOFIA), SAFIRE will apply two-dimensional pop-up bolometer arrays to
provide background-limited imaging spectrometry. Superconducting transition
edge bolometers and SQUID multiplexers are being developed for these detectors.
SAFIRE is expected to be a "First Light" instrument, useable during the initial
SOFIA operations. Although a PI instrument rather than a "Facility Class"
science instrument, it will be highly integrated with the standard SOFIA
planning, observation, and data analysis tools.Comment: 11 page
Signaling of Human Frizzled Receptors to the Mating Pathway in Yeast
Frizzled receptors have seven membrane-spanning helices and are considered as atypical G protein-coupled receptors (GPCRs). The mating response of the yeast Saccharomyces cerevisiae is mediated by a GPCR signaling system and this model organism has been used extensively in the past to study mammalian GPCR function. We show here that human Frizzled receptors (Fz1 and Fz2) can be properly targeted to the yeast plasma membrane, and that they stimulate the yeast mating pathway in the absence of added Wnt ligands, as evidenced by cell cycle arrest in G1 and reporter gene expression dependent on the mating pathway-activated FUS1 gene. Introducing intracellular portions of Frizzled receptors into the Ste2p backbone resulted in the generation of constitutively active receptor chimeras that retained mating factor responsiveness. Introducing intracellular portions of Ste2p into the Frizzled receptor backbone was found to strongly enhance mating pathway activation as compared to the native Frizzleds, likely by facilitating interaction with the yeast Gα protein Gpa1p. Furthermore, we show reversibility of the highly penetrant G1-phase arrests exerted by the receptor chimeras by deletion of the mating pathway effector FAR1. Our data demonstrate that Frizzled receptors can functionally replace mating factor receptors in yeast and offer an experimental system to study modulators of Frizzled receptors
The Athena X-ray Integral Field Unit (X-IFU)
The X-ray Integral Field Unit (X-IFU) is the high resolution X-ray spectrometer of the ESA Athena X-ray observatory. Over a field of view of 5' equivalent diameter, it will deliver X-ray spectra from 0.2 to 12 keV with a spectral resolution of 2.5 eV up to 7 keV on similar to 5 '' pixels. The X-IFU is based on a large format array of super-conducting molybdenum-gold Transition Edge Sensors cooled at similar to 90 mK, each coupled with an absorber made of gold and bismuth with a pitch of 249 mu m. A cryogenic anti-coincidence detector located underneath the prime TES array enables the non X-ray background to be reduced. A bath temperature of similar to 50 mK is obtained by a series of mechanical coolers combining 15K Pulse Tubes, 4K and 2K Joule-Thomson coolers which pre-cool a sub Kelvin cooler made of a He-3 sorption cooler coupled with an Adiabatic Demagnetization Refrigerator. Frequency domain multiplexing enables to read out 40 pixels in one single channel. A photon interacting with an absorber leads to a current pulse, amplified by the readout electronics and whose shape is reconstructed on board to recover its energy with high accuracy. The defocusing capability offered by the Athena movable mirror assembly enables the X-IFU to observe the brightest X-ray sources of the sky (up to Crab-like intensities) by spreading the telescope point spread function over hundreds of pixels. Thus the X-IFU delivers low pile-up, high throughput (> 50%), and typically 10 eV spectral resolution at 1 Crab intensities, i.e. a factor of 10 or more better than Silicon based X-ray detectors. In this paper, the current X-IFU baseline is presented, together with an assessment of its anticipated performance in terms of spectral resolution, background, and count rate capability. The X-IFU baseline configuration will be subject to a preliminary requirement review that is scheduled at the end of 2018. The X-IFU will be provided by an international consortium led by France, the Netherlands and Italy, with further ESA member state contributions from Belgium, Czech Republic, Finland, Germany, Ireland, Poland, Spain, Switzerland and contributions from Japan and the United States.Peer reviewe
Detection chain and electronic readout of the QUBIC instrument
The Q and U Bolometric Interferometer for Cosmology (QUBIC) Technical Demonstrator (TD) aiming to shows the feasibility of the combination of interferometry and bolometric detection. The electronic readout system is based on an array of 128 NbSi Transition Edge Sensors cooled at 350mK readout with 128 SQUIDs at 1K controlled and amplified by an Application Specific Integrated Circuit at 40K. This readout design allows a 128:1 Time Domain Multiplexing. We report the design and the performance of the detection chain in this paper. The technological demonstrator unwent a campaign of test in the lab. Evaluation of the QUBIC bolometers and readout electronics includes the measurement of I-V curves, time constant and the Noise Equivalent Power. Currently the mean Noise Equivalent Power is ~ 2 x 10⁻¹⁶ W/√Hz
Detection chain and electronic readout of the QUBIC instrument
The Q and U Bolometric Interferometer for Cosmology (QUBIC) Technical Demonstrator (TD) aiming to shows the feasibility of the combination of interferometry and bolometric detection. The electronic readout system is based on an array of 128 NbSi Transition Edge Sensors cooled at 350mK readout with 128 SQUIDs at 1K controlled and amplified by an Application Specific Integrated Circuit at 40K. This readout design allows a 128:1 Time Domain Multiplexing. We report the design and the performance of the detection chain in this paper. The technological demonstrator unwent a campaign of test in the lab. Evaluation of the QUBIC bolometers and readout electronics includes the measurement of I-V curves, time constant and the Noise Equivalent Power. Currently the mean Noise Equivalent Power is ~ 2 x 10⁻¹⁶ W/√Hz
Low incidence of SARS-CoV-2, risk factors of mortality and the course of illness in the French national cohort of dialysis patients
Extracorporeal Membrane Oxygenation for Severe Acute Respiratory Distress Syndrome associated with COVID-19: An Emulated Target Trial Analysis.
RATIONALE: Whether COVID patients may benefit from extracorporeal membrane oxygenation (ECMO) compared with conventional invasive mechanical ventilation (IMV) remains unknown. OBJECTIVES: To estimate the effect of ECMO on 90-Day mortality vs IMV only Methods: Among 4,244 critically ill adult patients with COVID-19 included in a multicenter cohort study, we emulated a target trial comparing the treatment strategies of initiating ECMO vs. no ECMO within 7 days of IMV in patients with severe acute respiratory distress syndrome (PaO2/FiO2 <80 or PaCO2 ≥60 mmHg). We controlled for confounding using a multivariable Cox model based on predefined variables. MAIN RESULTS: 1,235 patients met the full eligibility criteria for the emulated trial, among whom 164 patients initiated ECMO. The ECMO strategy had a higher survival probability at Day-7 from the onset of eligibility criteria (87% vs 83%, risk difference: 4%, 95% CI 0;9%) which decreased during follow-up (survival at Day-90: 63% vs 65%, risk difference: -2%, 95% CI -10;5%). However, ECMO was associated with higher survival when performed in high-volume ECMO centers or in regions where a specific ECMO network organization was set up to handle high demand, and when initiated within the first 4 days of MV and in profoundly hypoxemic patients. CONCLUSIONS: In an emulated trial based on a nationwide COVID-19 cohort, we found differential survival over time of an ECMO compared with a no-ECMO strategy. However, ECMO was consistently associated with better outcomes when performed in high-volume centers and in regions with ECMO capacities specifically organized to handle high demand. This article is open access and distributed under the terms of the Creative Commons Attribution Non-Commercial No Derivatives License 4.0 (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Automatic modeling of mammalian olfactory receptors and docking of odorants
We present a procedure that (i) automates the homology modeling of mammalian olfactory receptors (ORs) based on the first six three-dimensional (3D) structures of G protein- coupled receptors (GPCRs) available and (ii) performs the docking of odorants on these models, using the concept of colony energy to score the complexes. ORs exhibit low-sequence similarities with other GPCRs and current alignment methods often fail to provide a reliable alignment. Here, we use a fold recognition technique to obtain a robust initial alignment. The procedure is then applied to a human OR we had previously functionally characterized. The results, supported by receptor mutagenesis and functional assays, suggest that antagonists dock in the upper part of the binding pocket whereas agonists dock in the narrow lower part. We propose that the potency of agonists in activating receptors depends on their ability to establish tight interactions with the floor of the binding pocket. We developed a web site that allows the user to upload a GPCR sequence, choose a ligand in a library and obtain the 3D structure of the free receptor and ligand receptor complex (http://genome.jouy.inra.fr/GPCRautomodel)
Optimisation multi-acteurs appliquée à la valorisation de chaleur fatale d’unacteur industriel flexible
International audienceCet article présente un outil de modélisation et d’optimisation d’échanges d’énergie à l'échelle d’unquartier permettant de valoriser la flexibilité des acteurs appliqué à un cas d’étude. Cet outil permet de modéliserdes échanges à l’échelle macroscopique pour des projets multi-acteurs. Ecrit en langage Python, il utilise uneoptimisation MILP (Mixed-Integer Linear Programming). Le cas d’étude présenté dans cet article est situé sur laPresqu’île de Grenoble. Il s’agit du projet Valocal. Ce projet a pour but de valoriser la chaleur fatale du LaboratoireNational de Champs Magnétiques Intenses (LNCMI) en la réinjectant dans le réseau de chauffage urbain de laville. Cet article présente la modélisation des acteurs du projet – principalement l’opérateur du réseau de chaleur -dans le but de jouer sur les flexibilités des deux acteurs en fonction du taux de valorisation de la chaleur fatale, duprix de la calorie, ou encore des émissions CO2