ESR, ENDOR and TRIPLE resonance studies of the primary donor radical cation P960+ in the photosynthetic bacterium Rhodopseudomonas viridis

The light-induced radical cation of the primary electron donor P960+• in photosynthetic reaction centers from Rhodopseudomonas viridis has been investigated by ESR, ENDOR and TRIPLE techniques. Both the comparison with the cation radical of monomeric bacteriochlorophyll b (BChl b) and with molecular-orbital calculations performed on P960+• using the results of an X-ray structure analysis, consistently show an asymmetric distribution of the unpaired electron over the two BChl b molecules which constitute P960+•. The possible relevance of this result for the primary electron transfer step in the reaction center is briefly discussed

Changes on surface morphology of corn starch blend films

This study aims at evaluating the influence of enzymatic degradation solution on the surface morphology and thermal properties of a poly(ethylene-vinyl alcohol) copolymer-corn starch thermoplastic blend (SEVA-C), as a function of immersion time. To perform this study, three different batches were assessed using SEVA-C samples of different thicknesses and a fixed weight of 1.6 g, immersed in alpha-amylase (50 u/L) up to 90 days at 37 degrees C. TGA, contact angle measurements, scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques were used. Three degradation mechanisms are considered in these systems: namely, mass loss due to plasticizer leaching (glycerol), starch enzymatic cleavage, and synthetic polymer fractions degradation. Enzymatic hydrolysis of the starch fraction and subsequent leaching from the internal bulk structure led to an increase in surface porosity, pore size, roughness, and to the development of small pits throughout the surface, as observed by SEM and AFM

Synthesis of Hydrophilic and Amphiphilic Acryl Sucrose Monomers and Their Copolymerisation with Styrene, Methylmethacrylate and α- and β-Pinenes

Herein, we report the synthesis of monomethacryloyl sucrose esters, and their successful free radical homo- and co-polymerisation with styrene, methylmethacrylate, α-and β-pinene. The chemical, physical, structural and surface chemical properties of these polymers, containing a hydrophobic olefin backbone and hydrophilic sugar moieties as side chains, have been investigated. Biodegradation tests of the copolymer samples by a microbial fungal culture (Aspergillus niger) method showed good biodegradability. The chemical structure and surface chemistry of the synthesized homo- and co-polymers demonstrate their potential technological relevance as amphiphilic and biodegradable polymers

Nano-fibrous scaffolding architecture selectively enhances protein adsorption contributing to cell attachment

Tissue engineering aims at resolving problems such as donor shortage and immune rejection faced by transplantation. Scaffolds (artificial extracellular matrices) have critical roles in tissue engineering. Recently, we developed nano-fibrous poly( L -lactic acid) scaffolds under the hypothesis that synthetic nano-fibrous scaffolding, mimicking the structure of natural collagen fibers, could create a more favorable microenvironment for cells. This is the first report that the nano-fibrous architecture built in three-dimensional scaffolds improved the features of protein adsorption, which mediates cell interactions with scaffolds. Scaffolds with nano-fibrous pore walls adsorbed four times more serum proteins than scaffolds with solid pore walls. More interestingly, the nano-fibrous architecture selectively enhanced protein adsorption including fibronectin and vitronectin, even though both scaffolds were made from the same poly( L -lactic acid) material. Furthermore, nano-fibrous scaffolds also allowed >1.7 times of osteoblastic cell attachment than scaffolds with solid pore walls. These results demonstrate that the biomimetic nano-fibrous architecture serves as superior scaffolding for tissue engineering. © 2003 Wiley Periodicals, Inc. J Biomed Mater Res 67A: 531–537, 2003Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/34430/1/10098_ftp.pd

Enzymatic degradation of starch thermoplastic blends using samples of different thickness

The material studied was a thermoplastic blend of corn starch with a poly(ethylene-vinyl alcohol) copolymer, SEVA-C. The influence of both the material’s exposed surface and enzyme concentration on degradation kinetics was studied. As α-amylase is present in the blood plasma, experiments were performed, varying the material thickness and the α-amylase between 50 and 100 units/l, at 37°C, lasting up to 90 days. Four different batches using SEVA-C and starch samples of different thickness were performed. The positive correlation between degradation rate and the exposed material surface was confirmed, since thin films with larger exposed surfaces were degraded faster than thick square plates having the same total mass. The degradation extent depends on the total amount of amorphous starch present in the formulation rather than on the amount of enzyme used and the minimum thickness to ensure maximum degradation was estimated to be close to 0.25 mm

Human-based fibrillar nanocomposite hydrogels as bioinstructive matrices to tune stem cell behavior

The extracellular matrix (ECM)-biomimetic fibrillar structure of platelet lysate (PL) gels along with its enriched milieu of biomolecules has drawn significant interest in regenerative medicine applications. However, PL-based gels have poor structural stability which severely limits its performance as a bioinstructive biomaterial. Here, rod-shaped cellulose nanocrystals (CNC) are used as a novel approach to modulate the physical and biochemical microenvironment of PL gels enabling their effective use as injectable human-based cell scaffolds with a level of biomimicry that is difficult to recreate with synthetic biomaterials. The incorporation of CNC (0 to 0.61 wt.%) into the PL fibrillar network during the coagulation cascade leads to decreased fiber branching, increased interfiber porosity (from 66 to 83%) and modulate fiber (from 1.4 ± 0.7 to 27 ± 12 kPa) and bulk hydrogel (from 18 ± 4 to 1256 ± 82 Pa) mechanical properties. As result of these physicochemical alterations, nanocomposite PL hydrogels resist to the typical extensive clot retraction (from 76 ± 1 to 24 ± 3 at Day 7) and show favored retention of PL bioactive molecules. The feedback of these cues on the fate of human adipose-derived stem cells is evaluated, showing how it can be explored to modulate the commitment of encapsulated stem cells toward different genetic phenotypes without the need for additional external biological stimuli. These fibrillar nanocomposite hydrogels allow therefore to explore the outstanding biological properties of human-based PL as an efficient engineered ECM which can be tailored to trigger specific regenerative pathways in minimal invasive strategies.The authors thank the Hospital da Prelada (Porto, Portugal) for providing adipose tissue samples. The authors acknowledge the financial support from project Recognize (UTAP-ICDT/CTM-BIO/0023/2014), project NORTE-01-0145FEDER-000021 supported by the Norte Portugal Regional Operational Programme (NORTE 2020), under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund (ERDF), the European Union Framework Programme for Research and Innovation HORIZON 2020, under the TEAMING Grant agreement No. 739572 – The Discoveries CTR EU, Forecast 668983, Marie Skłodowska-Curie grant agreement No. 706996 (PrinTendon) and CHEM2NATURE 692333; FCT/MCTES (Fundação para a Ciência e a Tecnologia/ Ministério da Ciência, Tecnologia, e Ensino Superior) and the Fundo Social Europeu através do Programa Operacional do Capital Humano (FSE/POCH) in the framework of PhD grant PD/59/2013 – PD/BD/113807/2015 for BBM, Post-Doc grant SFRH/BPD/112459/2015 for R.D.info:eu-repo/semantics/publishedVersio