Influence of particle size on the carbonation of stainless steel slag for CO2 storage

Abstract The main aims of this work were to assess the CO2 storage capacity of different particle size fractions of stainless steel slag subjected to accelerated carbonation under mild operating conditions, to study the influence on reaction kinetics of some of the main operating parameters (temperature, pressure and liquid to solid ratio) and to determine the effects of the process on slag mineralogy and leaching behavior. Maximum CO2 uptakes of 130 g CO2/kg residues were measured for the finest grain size and decreased with particle size owing to differences in reacting species availability and specific surface. Process kinetics proved relatively fast, achieving completion in around 2 hours with a CO2 pressure of 3 bar and an optimal liquid to solid ratio of 0.4; temperature was the parameter that most influenced CO2 uptake, due to its enhancement effect on silicates dissolution

Anaerobic Biodegradability of Commercial Bioplastic Products: Systematic Bibliographic Analysis and Critical Assessment of the Latest Advances

Bioplastics have entered everyday life as a potential sustainable substitute for commodity plastics. However, still further progress should be made to clarify their degradation behavior under controlled and uncontrolled conditions. The wide array of biopolymers and commercial blends available make predicting the biodegradation degree and kinetics quite a complex issue that requires specific knowledge of the multiple factors affecting the degradation process. This paper summarizes the main scientific literature on anaerobic digestion of biodegradable plastics through a general bibliographic analysis and a more detailed discussion of specific results from relevant experimental studies. The critical analysis of literature data initially included 275 scientific references, which were then screened for duplication/pertinence/relevance. The screened references were analyzed to derive some general features of the research profile, trends, and evolution in the field of anaerobic biodegradation of bioplastics. The second stage of the analysis involved extracting detailed results about bioplastic degradability under anaerobic conditions by screening analytical and performance data on biodegradation performance for different types of bioplastic products and different anaerobic biodegradation conditions, with a particular emphasis on the most recent data. A critical overview of existing biopolymers is presented, along with their properties and degradation mechanisms and the operating parameters influencing/enhancing the degradation process under anaerobic conditions

Comparison of different reaction routes for carbonation of APC residues

Abstract This paper analyses and compares the results of accelerated carbonation experiments for CO2 storage carried out on the air pollution control (APC) residues of a waste incineration plant, via both the dry and the wet route. The two routes achieved a similar maximum calcium conversion to carbonates (around 65%) corresponding to a potential CO2 storage capacity of 250 g/kg residues. For the dry route, maximum conversion was achieved in a few minutes at 400 ∘C under a 10% CO2 atmosphere, whereas for the wet route it was obtained in about 10 minutes under a 100% CO2 atmosphere, with a liquid to solid ratio of 0.2, at 30 ∘C and 3 bar, or without water addition at 50 ∘C. These results suggest that carbonation of APC residues, and possibly of other combustion residues, through either the dry or wet route, may be effectively applied for CO2 storage, at least in the niche market of waste incineration

Biohydrogen production from food waste: Influence of the inoculum-to-substrate ratio

In this study, the influence of the inoculum-to-substrate ratio (ISR) on dark fermentative hydrogen production from food waste (FW) was evaluated. ISR values ranging from 0.05 to 0.25 g VSinoculum/g VSsubstrate were investigated by performing batch tests at T = 39 °C and pH = 6.5, the latter being the optimal value identified based on a previous study. The ISR was found to affect the fermentation process, clearly showing that an adequate ISR is essential in order to optimise the process kinetics and the H2 yield. An ISR of 0.14 proved to optimum, leading to a maximum H2 yield of 88.8 L H2/kg VSFW and a maximum production rate of 10.8 L H2/kg VSFW∙h. The analysis of the fermentation products indicated that the observed highest H2 production mostly derived from the typical acetate/butyrate-type fermentation

Accelerated carbonation of steel slags using CO2 diluted sources: CO2 uptakes and energy requirements

This work presents the results of carbonation experiments performed on Basic Oxygen Furnace (BOF) steel slag samples employing gas mixtures containing 40 and 10% CO2 vol. simulating the gaseous effluents of gasification and combustion processes respectively, as well as 100% CO2 for comparison purposes. Two routes were tested, the slurry-phase (L/S = 5 l/kg, T = 100°C and Ptot = 10 bar) and the thin-film (L/S = 0.3–0.4 l kg, T = 50°C and Ptot = 7–10 bar) routes. For each one, the CO2 uptake achieved as a function of the reaction time was analyzed and on this basis, the energy requirements associated with each carbonation route and gas mixture composition were estimated considering to store the CO2 emissions of a medium size natural gas fired power plant (20 MW). For the slurry-phase route, maximum CO2 uptakes ranged from around 8% at 10% CO2, to 21.1% (BOF-a) and 29.2% (BOF-b) at 40% CO2 and 32.5% (BOF-a) and 40.3% (BOF-b) at 100% CO2. For the thin-film route, maximum uptakes of 13% (BOF-c) and 19.5% (BOF-d) at 40% CO2, and 17.8% (BOF-c) and 20.2% (BOF-d) at 100% were attained. The energy requirements of the two analyzed process routes appeared to depend chiefly on the CO2 uptake of the slag. For both process route, the minimum overall energy requirements were found for the tests with 40% CO2 flows (i.e., 1400−1600 MJ/tCO2 for the slurry-phase and 2220 – 2550 MJ/tCO2 for the thin-film route)

Two-Stage Process for Energy Valorization of Cheese Whey through Bio-Electrochemical Hydrogen Production Coupled with Microbial Fuel Cell

The present work investigates a two-stage process scheme for cheese whey valorization through energy recovery in different forms by means of bio-electrochemical systems. The first stage consisted of an integrated bio-electrochemical process for H2 and electricity production. This combined dark fermentation with an electrochemical system with the aim of overcoming the typical thermodynamic/biochemical limitations of fermentation and enhancing H2 recovery. The second treatment stage involved a single-chamber microbial fuel cell, featuring an innovative configuration consisting of four air cathodes with fly ash as the oxygen reduction catalyst. The bio-electrochemical process performed in the first stage achieved promising results, displaying a three-times higher H2 production yield compared to conventional dark fermentation. In addition, the experiments using the MFC in the second stage were found to successfully exploit the effluent from the first stage, with COD removal yields of 86% +/- 8% and energy recovery with a maximum current output of 1.6 mA and a maximum power density of 1.2 W/m3

Disposable Mater-Bi® bioplastic tableware: Characterization and assessment of anaerobic biodegradability

In this study commercial starch-based (Mater-Bi®) disposable bioplastic tableware items, which are among the most widely used commercial products available on the market, were selected for lab-scale anaerobic degradability tests. Since the knowledge of the biodegradation profile of bioplastic products is still incomplete, the study was aimed at investigating the maximum biodegradation potential of the materials under ideal anaerobic conditions, as well as the biodegradability degree as a function of treatment time. The experiments were carried out under mesophilic and thermophilic conditions at different food to microorganism ratios and test material sizes, and the specific biogas production and associated kinetics were evaluated. Biogas production was observed only under thermophilic conditions, with conversion yields in the range 602–898 mL/gTOC for the tested cups and 1207 ± 52.8 mL/gTOC for the knives. The degrees of biodegradation and disintegration were found to be strongly dependent on the product composition. Physical, chemical and morphological analyses were used to characterize the tested materials before and after the degradation and potential correlations among process parameters and bioplastic characteristics were derived

Organic waste biorefineries: looking towards implementation

The concept of biorefinery expands the possibilities to extract value from organic matter in form of either bespoke crops or organic waste. The viability of biorefinery schemes depends on the recovery of higher-value chemicals with potential for a wide distribution and an untapped marketability. The feasibility of biorefining organic waste is enhanced by the fact that the biorefinery will typically receive a waste management fee for accepting organic waste. The development and implementation of waste biorefinery concepts can open up a wide array of possibilities to shift waste management towards higher sustainability. However, barriers encompassing environmental, technical, economic, logistic, social and legislative aspects need to be overcome. For instance, waste biorefineries are likely to be complex systems due to the variability, heterogeneity and low purity of waste materials as opposed to dedicated biomasses. This article discusses the drivers that can make the biorefinery concept applicable to waste management and the possibilities for its development to full scale. Technological, strategic and market constraints affect the successful implementations of these systems. Fluctuations in waste characteristics, the level of contamination in the organic waste fraction, the proximity of the organic waste resource, the markets for the biorefinery products, the potential for integration with other industrial processes and disposal of final residues are all critical aspects requiring detailed analysis. Furthermore, interventions from policy makers are necessary to foster sustainable bio-based solutions for waste management

Specialty grand challenge: renaming our section to “Carbon Dioxide Removal”

Peer Reviewe

Sinterizzazione delle ceneri volanti da impianti di incenerimento di Rsu

Il manoscritto contiene i risultati ottenuti nel corso di una campagna sperimentale per la valutazione della applicabilità di un trattamento di sinterizzazione delle ceneri volanti provenienti dalla termovalorizzazione dei rifiuti urbani. Quale additivo del processo termico di sinterizzazione è stato impiegato polverino da carbone, in modo da ottenere uno schema di processo basato sul co-trattamento di più residui di origine industriale. I prodotti del trattamento sono stati caratterizzati in termini di comportamento ambientale e caratteristiche fisiche e meccaniche, con particolare riferimento alle proprietà che ne condizionano il reimpiego nei settori dell'ingegneria civile