Experimental tests of slender reinforced concrete columns under combined axial load and lateral force

The use of high strength concrete (HSC) in columns has become more frequent since a substantial reduction of the cross-section is obtained, meaning that slenderness increases for the same axial load and length, producing higher second order effects. However, the experimental tests in the literature of reinforced concrete columns subjected to axial load and lateral force focus on shear span ratios, according to Eurocode 2 (2004), clause 5.6.3., (M/(V·h)) lower than 6.5. This gap in the literature limits technological development for the construction of these structural elements. This paper presents 44 experimental tests on reinforced concrete columns subjected to constant axial load and monotonic lateral force. The aim of this is to gain greater knowledge of the types of elements which will also be of use in calibrating the numerical models and validating the simplified methods. The test parameters are strength of concrete (normal- and high-strength concrete), shear span ratio, axial load level and longitudinal and transversal reinforcement ratios. The strength and deformation of the columns were studied, and an analysis of the simplified methods from Eurocode 2 (2004) and ACI-318 (2008) concluded that both are very conservative. © 2011 Elsevier Ltd.The authors wish to express their sincere gratitude to the Spanish Ministry of Science and Innovation for the help provided through project BIA2009-10207 and to the European Union for the financial support from Feder funds.Barrera Puerto, A.; Bonet Senach, JL.; Romero, ML.; Miguel Sosa, P. (2011). Experimental tests of slender reinforced concrete columns under combined axial load and lateral force. Engineering Structures. 33(12):3676-3689. https://doi.org/10.1016/j.engstruct.2011.08.003S36763689331

Effective flexural stiffness of slender reinforced concrete columns under axial forces and biaxial bending

Most of the design codes (ACI-318-2008 and Euro Code-2-2004) propose the moment magnifier method in order to take into account the second order effect to design slender reinforced concrete columns. The accuracy of this method depends on the effective flexural stiffness of the column. This paper proposes a new equation to obtain the effective stiffness EI of slender reinforced concrete columns. The expression is valid for any shape of cross-section, subjected to combined axial loads and biaxial bending, both for short-time and sustained loads, normal and high strength concretes, but it is only suitable for columns with equal effective buckling lengths in the two principal bending planes. The new equation extends the proposed EI equation in the "Biaxial bending moment magnifier method" by Bonet et al. (2004) [6], which is valid only for rectangular sections. The method was compared with 613 experimental tests from the literature and a good degree of accuracy was obtained. It was also compared with the design codes ACI-318 (08) and EC-2 (2004) improving the precision. The method is capable to verify and design with sufficient accuracy slender reinforced concrete columns in practical engineering design applications. © 2010 Elsevier Ltd.The authors wish to express their sincere gratitude to the Spanish "Ministerio de Ciencia e Innovacion" for help provided through projects BIA2008-03734 and BIA2009-10207 and to the European Community with the Feder funds.Bonet Senach, JL.; Romero, ML.; Miguel Sosa, P. (2011). Effective flexural stiffness of slender reinforced concrete columns under axial forces and biaxial bending. Engineering Structures. 33:881-893. doi:10.1016/j.engstruct.2010.12.009S8818933

Rotational Surfaces in L3\mathbb{L}^3 and Solutions in the Nonlinear Sigma Model

The Gauss map of non-degenerate surfaces in the three-dimensional Minkowski space are viewed as dynamical fields of the two-dimensional O(2,1) Nonlinear Sigma Model. In this setting, the moduli space of solutions with rotational symmetry is completely determined. Essentially, the solutions are warped products of orbits of the 1-dimensional groups of isometries and elastic curves in either a de Sitter plane, a hyperbolic plane or an anti de Sitter plane. The main tools are the equivalence of the two-dimensional O(2,1) Nonlinear Sigma Model and the Willmore problem, and the description of the surfaces with rotational symmetry. A complete classification of such surfaces is obtained in this paper. Indeed, a huge new family of Lorentzian rotational surfaces with a space-like axis is presented. The description of this new class of surfaces is based on a technique of surgery and a gluing process, which is illustrated by an algorithm.Comment: PACS: 11.10.Lm; 11.10.Ef; 11.15.-q; 11.30.-j; 02.30.-f; 02.40.-k. 45 pages, 11 figure

Examining the independent and joint effects of molecular genetic liability and environmental exposures in schizophrenia: results from the EUGEI study

Schizophrenia is a heritable complex phenotype associated with a background risk involving multiple common genetic variants of small effect and a multitude of environmental exposures. Early twin and family studies using proxy‐genetic liability measures suggest gene‐environment interaction in the etiology of schizophrenia spectrum disorders, but the molecular evidence is scarce. Here, by analyzing the main and joint associations of polygenic risk score for schizophrenia (PRS‐SCZ) and environmental exposures in 1,699 patients with a diagnosis of schizophrenia spectrum disorders and 1,542 unrelated controls with no lifetime history of a diagnosis of those disorders, we provide further evidence for gene‐environment interaction in schizophrenia. Evidence was found for additive interaction of molecular genetic risk state for schizophrenia (binary mode of PRS‐SCZ above 75% of the control distribution) with the presence of lifetime regular cannabis use and exposure to early‐life adversities (sexual abuse, emotional abuse, emotional neglect, and bullying), but not with the presence of hearing impairment, season of birth (winter birth), and exposure to physical abuse or physical neglect in childhood. The sensitivity analyses replacing the a priori PRS‐SCZ at 75% with alternative cut‐points (50% and 25%) confirmed the additive interaction. Our results suggest that the etiopathogenesis of schizophrenia involves genetic underpinnings that act by making individuals more sensitive to the effects of some environmental exposures

Dental Health and Mortality in People With End-Stage Kidney Disease Treated With Hemodialysis: A Multinational Cohort Study

Background Dental disease is more extensive in adults with chronic kidney disease, but whether dental health and behaviors are associated with survival in the setting of hemodialysis is unknown. Study Design Prospective multinational cohort. Setting & Participants 4,205 adults treated with long-term hemodialysis, 2010 to 2012 (Oral Diseases in Hemodialysis [ORAL-D] Study). Predictors Dental health as assessed by a standardized dental examination using World Health Organization guidelines and personal oral care, including edentulousness; decayed, missing, and filled teeth index; teeth brushing and flossing; and dental health consultation. Outcomes All-cause and cardiovascular mortality at 12 months after dental assessment. Measurements Multivariable-adjusted Cox proportional hazards regression models fitted with shared frailty to account for clustering of mortality risk within countries. Results During a mean follow-up of 22.1 months, 942 deaths occurred, including 477 cardiovascular deaths. Edentulousness (adjusted HR, 1.29; 95% CI, 1.10-1.51) and decayed, missing, or filled teeth score ≥ 14 (adjusted HR, 1.70; 95% CI, 1.33-2.17) were associated with early all-cause mortality, while dental flossing, using mouthwash, brushing teeth daily, spending at least 2 minutes on oral hygiene daily, changing a toothbrush at least every 3 months, and visiting a dentist within the past 6 months (adjusted HRs of 0.52 [95% CI, 0.32-0.85], 0.79 [95% CI, 0.64-0.97], 0.76 [95% CI, 0.58-0.99], 0.84 [95% CI, 0.71-0.99], 0.79 [95% CI, 0.65-0.95], and 0.79 [95% CI, 0.65-0.96], respectively) were associated with better survival. Results for cardiovascular mortality were similar. Limitations Convenience sample of clinics. Conclusions In adults treated with hemodialysis, poorer dental health was associated with early death, whereas preventive dental health practices were associated with longer survival

Examining facial emotion recognition as an intermediate phenotype for psychosis: findings from the EUGEI study

Background Social cognition impairments, such as facial emotion recognition (FER), have been acknowledged since the earliest description of schizophrenia. Here, we tested FER as an intermediate phenotype for psychosis using two approaches that are indicators of genetic risk for schizophrenia: the proxy-genetic risk approach (family design) and the polygenic risk score for schizophrenia (PRS-SCZ). Methods The sample comprised 2039 individuals with schizophrenia, 2141 siblings, and 2049 healthy controls (HC). The Degraded Facial Affect Recognition Task (DFAR) was applied to measure the FER accuracy. Schizotypal traits in siblings and HC were assessed using the Structured Interview for Schizotypy-Revised (SIS-R). The PRS-SCZ was trained using the Psychiatric Genomics Consortium results. Regression models were applied to test the association of DFAR with psychosis risk, SIS-R, and PRS-SCZ. Results The DFAR-total scores were lower in individuals with schizophrenia than in siblings (RR = 0.97 [95% CI 0.97, 0.97]), who scored lower than HC (RR = 0.99 [95% CI 0.99–1.00]). The DFAR-total scores were negatively associated with SIS-R total scores in siblings (B = −2.04 [95% CI −3.72, −0.36]) and HC (B = −2.93 [95% CI −5.50, −0.36]). Different patterns of association were observed for individual emotions. No significant associations were found between DFAR scores and PRS-SCZ. Conclusions Our findings based on a proxy genetic risk approach suggest that FER deficits may represent an intermediate phenotype for schizophrenia. However, a significant association between FER and PRS-SCZ was not found. In the future, genetic mechanisms underlying FER phenotypes should be investigated trans-diagnostically

A replication study of JTC bias, genetic liability for psychosis and delusional ideation

Background This study attempted to replicate whether a bias in probabilistic reasoning, or ‘jumping to conclusions’(JTC) bias is associated with being a sibling of a patient with schizophrenia spectrum disorder; and if so, whether this association is contingent on subthreshold delusional ideation. Methods Data were derived from the EUGEI project, a 25-centre, 15-country effort to study psychosis spectrum disorder. The current analyses included 1261 patients with schizophrenia spectrum disorder, 1282 siblings of patients and 1525 healthy comparison subjects, recruited in Spain (five centres), Turkey (three centres) and Serbia (one centre). The beads task was used to assess JTC bias. Lifetime experience of delusional ideation and hallucinatory experiences was assessed using the Community Assessment of Psychic Experiences. General cognitive abilities were taken into account in the analyses. Results JTC bias was positively associated not only with patient status but also with sibling status [adjusted relative risk (aRR) ratio : 4.23 CI 95% 3.46–5.17 for siblings and aRR: 5.07 CI 95% 4.13–6.23 for patients]. The association between JTC bias and sibling status was stronger in those with higher levels of delusional ideation (aRR interaction in siblings: 3.77 CI 95% 1.67–8.51, and in patients: 2.15 CI 95% 0.94–4.92). The association between JTC bias and sibling status was not stronger in those with higher levels of hallucinatory experiences. Conclusions These findings replicate earlier findings that JTC bias is associated with familial liability for psychosis and that this is contingent on the degree of delusional ideation but not hallucination

A replication study of JTC bias, genetic liability for psychosis and delusional ideation

Background This study attempted to replicate whether a bias in probabilistic reasoning, or ‘jumping to conclusions’(JTC) bias is associated with being a sibling of a patient with schizophrenia spectrum disorder; and if so, whether this association is contingent on subthreshold delusional ideation. Methods Data were derived from the EUGEI project, a 25-centre, 15-country effort to study psychosis spectrum disorder. The current analyses included 1261 patients with schizophrenia spectrum disorder, 1282 siblings of patients and 1525 healthy comparison subjects, recruited in Spain (five centres), Turkey (three centres) and Serbia (one centre). The beads task was used to assess JTC bias. Lifetime experience of delusional ideation and hallucinatory experiences was assessed using the Community Assessment of Psychic Experiences. General cognitive abilities were taken into account in the analyses. Results JTC bias was positively associated not only with patient status but also with sibling status [adjusted relative risk (aRR) ratio : 4.23 CI 95% 3.46–5.17 for siblings and aRR: 5.07 CI 95% 4.13–6.23 for patients]. The association between JTC bias and sibling status was stronger in those with higher levels of delusional ideation (aRR interaction in siblings: 3.77 CI 95% 1.67–8.51, and in patients: 2.15 CI 95% 0.94–4.92). The association between JTC bias and sibling status was not stronger in those with higher levels of hallucinatory experiences. Conclusions These findings replicate earlier findings that JTC bias is associated with familial liability for psychosis and that this is contingent on the degree of delusional ideation but not hallucination