10,363 research outputs found
Kolmogorov-Smirnov method for the determination of signal time-shifts
A new method for the determination of electric signal time-shifts is
introduced. As the Kolmogorov-Smirnov test, it is based on the comparison of
the cumulative distribution functions of the reference signal with the test
signal. This method is very fast and thus well suited for on-line applications.
It is robust to noise and its performances in terms of precision are excellent
for time-shifts ranging from a fraction to several sample durations.
PACS. 29.40.Gx (Tracking and position-sensitive detectors), 29.30.Kv (X- and
-ray spectroscopy), 07.50.Qx (Signal processing electronics)Comment: 8 pages, 7 figure
Fast analytical methods for the correction of signal random time-shifts and application to segmented HPGe detectors
Detection systems rely more and more on on-line or off-line comparison of
detected signals with basis signals in order to determine the characteristics
of the impinging particles. Unfortunately, these comparisons are very sensitive
to the random time shifts that may alter the signal delivered by the detectors.
We present two fast algebraic methods to determine the value of the time shift
and to enhance the reliability of the comparison to the basis signals.Comment: 13 pages, 8 figure
Normal metal tunnel junction-based superconducting quantum interference proximity transistor: the N-SQUIPT
We report the fabrication and characterization of an alternative design for a
superconducting quantum interference proximity transistor (SQUIPT) based on a
normal metal (N) probe. The absence of direct Josephson coupling between the
proximized metal nanowire and the N probe allows us to observe the full
modulation of the wire density of states around zero voltage and current
\textit{via} the application of an external magnetic field. This results into a
drastic suppression of power dissipation which can be as low as a few W. In this context the interferometer allows an improvement of up to
four orders of magnitude with respect to earlier SQUIPT designs, and makes it
ideal for extra-low power cryogenic applications. In addition, the N-SQUIPT has
been recently predicted to be the enabling candidate for the implementation of
coherent caloritronic devices based on proximity effect.Comment: 5 pages, 4 color figure
Creep motion of a model frictional system
We report on the dynamics of a model frictional system submitted to minute
external perturbations. The system consists of a chain of sliders connected
through elastic springs that rest on an incline. By introducing cyclic
expansions and contractions of the springs we observe a reptation of the chain.
We account for the average reptation velocity theoretically. The velocity of
small systems exhibits a series of plateaus as a function of the incline angle.
Due to elastic e ects, there exists a critical amplitude below which the
reptation is expected to cease. However, rather than a full stop of the creep,
we observe in numerical simulations a transition between a continuous-creep and
an irregular-creep regime when the critical amplitude is approached. The latter
transition is reminiscent of the transition between the continuous and the
irregular compaction of granular matter submitted to periodic temperature
changes
Quasiparticles in the Pseudogap Phase of Underdoped Cuprate
Recent angle resolved photoemission \cite{yang-nature-08} and scanning
tunneling microscopy \cite{kohsaka-nature-08} measurements on underdoped
cuprates have yielded new spectroscopic information on quasiparticles in the
pseudogap phase. New features of the normal state such as particle-hole
asymmetry, maxima in the energy dispersion and accompanying drops in the
spectral weight of quasiparticles agree with the ansatz of Yang \textit{et al.}
for the single particle propagator in the pseudogap phase. The coherent
quasiparticle dispersion and reduced asymmetry in the tunneling density of
states in the superconducting state can also be described by this propagator.Comment: updated version, 6 pages, 7 figures, 1 table, EPL 86 (2009) 37002
(https://www.epletters.net
The Interaction between the Forkhead Thyroid Transcription Factor TTF-2 and the Constitutive Factor CTF/NF-1 Is Required for Efficient Hormonal Regulation of the Thyroperoxidase Gene Transcription
The forkhead thyroid-specific transcription factor TTF-2 is the main mediator of thyrotropin and insulin regulation of thyroperoxidase (TPO) gene expression. This function depends on multimerization and specific orientation of its DNA-binding site, suggesting that TTF-2 is part of a complex interaction network within the TPO promoter. This was confirmed by transfection experiments and by protein-DNA interaction studies, which demonstrated that CTF/NF1 proteins bind 10 base pairs upstream of the TTF-2- binding site to enhance its action in hormone-induced expression of the TPO gene. GST pull-down assays showed that TTF-2 physically interacts with CTF/NF1 proteins. In addition, we demonstrate that increasing the distance between both transcription factors binding sites by base pair insertion results in loss of promoter activity and in a drastic decrease on the ability of the promoter to respond to the hormones. CTF/NF1 is a family of transcription factors that contributes to constitutive and cell-type specific gene expression. Originally identified as factors implicated in the replication of adenovirus, this group of proteins (CTF/NF1-A, -B, -C, and - X) is now known to be involved in the regulation of several genes. In contrast to other reports regarding the involvement of these proteins in inducible gene expression, we show here that members of this family of transcription factors are regulated by hormones. With the use of specific CTF/NF1 DNA probes and antibodies we demonstrate that CTF/NF1-C is a thyrotropin-, cAMP-, and insulin-inducible protein. Thus CTF/NF1 proteins do not only mediate hormone-induced gene expression cooperating with TTF-2, but are themselves hormonally regulated. All these findings are clearly of important value in understanding the mechanisms governing the transcription regulation of RNA polymerase II promoters, which often contain binding sites for multiple transcription factors
Prélèvement et échantillonnage dans les petits bassins-versants ruraux
Cet article traite de la représentativité des prélèvements d'eau effectués dans le cadre de suivis de bassins versants ou de rivières.Les réflexions proposées sont en premier lieu basées sur des expérimentations de laboratoire et de terrain destinées à comparer divers systèmes et modalités de prélèvements. Les résultats obtenus montrent en particulier que les prélèvements de matières en suspension de dimensions > 100 µm sont peu fiables alors que ce type de particules présente, dans certain cas, une contribution non négligeable aux flux de phosphore total.Les suivis réalisés en divers points représentatifs de petits bassins expérimentaux fournissent des éléments de discussion complémentaires sur le choix des sites des prélèvements et sur les pas de temps de ceux-ci. Nous montrons entre autre, toute l'importance de saisir le début des crues dans les bassins à forte pollution ponctuelle et de considérer des suivis des périodes suffisamment longues pour intégrer les divers fonctionnements hydrochimiques du bassin versant étudié.Water and suspended matter sampling in hydrographic networks is studied through various sampling systems and procedures, and through devices used in fields and in laboratories (fig. 1).Large size particles tend to be underestimated whatever the sampling procedure (manual or automatic) (fig. 2, 3). On the other hand, the sampling for soluble elements and small site particles (less man 50 µm) is very reliable. This is observed in suspended matter concentrations, eg < 2 g.l-1.The largest particles of suspended matter sometimes contribute to nutrient transfer, e.g. phosphorous. This however depends upon the presence of soil microaggregates and nutrient geochemistry. Moreover, natural hydrological variations give rise to another problem for sampling, especially for suspended matter (fig. 7, 9, 10, table 2).Comparatively the variation due to preservation of water is of secondary importance (fig. 11).However, thanks to results from monitoring in experimental watersheds, it is possible to find the best sampling station and the hast time to carry out sampling (fig. 12, 13; fable 3).Duration of survey and intervals between each sample depend, of course, upon the objectives of the study, but also upon watershed characteristics. Considering these characteristics, we propose an example of sampling stategy in the text (table 6, fig. 5)
Recommended from our members
Serving GODAE Data and Products to the Ocean Community
The Global Ocean Data Assimilation Experiment (GODAE [http://
www.godae.org]) has spanned a decade of rapid technological development. The ever-increasing volume and diversity of oceanographic data produced by in situ instruments, remote-sensing platforms, and computer simulations have driven
the development of a number of innovative technologies that are essential for connecting scientists with the data that they need. This paper gives an overview of the technologies that have been developed and applied in the course of GODAE, which now provide users of oceanographic data with the capability to discover, evaluate, visualize, download, and analyze data from all over the world. The key to this
capability is the ability to reduce the inherent complexity of oceanographic data by providing a consistent, harmonized view of the various data products. The challenges of data serving have been addressed over the last 10 years through the cooperative skills and energies of many individuals
An international prospective general population-based study of respiratory work disability
Background: Previous cross-sectional studies have shown that job change due to breathing problems at the workplace (respiratory work disability) is common among adults of working age. That research indicated that occupational exposure to gases, dust and fumes was associated with job change due to breathing problems, although causal inferences have been tempered by the cross-sectional nature of previously available data. There is a need for general population-based prospective studies to assess the incidence of respiratory work disability and to delineate better the roles of potential predictors of respiratory work disability.Methods: A prospective general population cohort study was performed in 25 centres in 11 European countries and one centre in the USA. A longitudinal analysis was undertaken of the European Community Respiratory Health Survey including all participants employed at any point since the baseline survey, 6659 subjects randomly sampled and 779 subjects comprising all subjects reporting physician-diagnosed asthma. The main outcome measure was new-onset respiratory work disability, defined as a reported job change during follow-up attributed to breathing problems. Exposure to dusts (biological or mineral), gases or fumes during follow-up was recorded using a job-exposure matrix. Cox proportional hazard regression modelling was used to analyse such exposure as a predictor of time until job change due to breathing problems.Results: The incidence rate of respiratory work disability was 1.2/1000 person-years of observation in the random sample (95% CI 1.0 to 1.5) and 5.7/1000 person-years in the asthma cohort (95% CI 4.1 to 7.8). In the random population sample, as well as in the asthma cohort, high occupational exposure to biological dust, mineral dust or gases or fumes predicted increased risk of respiratory work disability. In the random sample, sex was not associated with increased risk of work disability while, in the asthma cohort, female sex was associated with an increased disability risk (hazard ratio 2.8, 95% CI 1.3 to 5.9).Conclusions: Respiratory work disability is common overall. It is associated with workplace exposures that could be controlled through preventive measures
Unusual Spread of a Penicillin-Susceptible Methicillin-Resistant Staphylococcus aureus Clone in a Geographic Area of Low Incidence
We describe the unusual spread of a penicillin-susceptible methicillin-resistant Staphylococcus aureus (MRSA) clone in hospitals in western Switzerland, where the incidence of MRSA is usually low. During a 2-year period, this clone had been responsible for several outbreaks and had been isolated from >156 persons in 21 institutions. Molecular typing by pulsed-field gel electrophoresis (PFGE) demonstrated that all of these isolates belonged to the same clone. In 1 of the outbreaks, involving 30 cases, the clone was responsible for at least 17 secondary cases. In contrast, during the period of the latter outbreak, 9 other patients harboring different MRSA strains, as assessed by PFGE, were hospitalized in the same wards, but no secondary cases occurred. These observations suggest that this clone, compared with other MRSA strains, had some intrinsic factor(s) that contributed to its ability to disseminate and could thus be considered epidemi
- …