El papel de la teología en la promoción de una universidad liberal y pluralista

El estudio considera la cuestión de la presencia viva de la teología cristiana en la universidad secular. Se observa esta presencia viva y eficaz a partir de la fundación de la institución universitaria durante el medioevo, su declive a lo largo de la modernidad, hasta la ausencia generalizada de la teología en la universidad en los momentos actuales. El autor retiene que la teología–reflexión basada en la autoridad de la revelación–por su nativa apertura hacia la fuente infinita de todo el ser y la verdad, que es Dios, posee una fuerza integradora singular para todas las disciplinas científicas y humanísticas. La práctica de la teología hace posible que las disciplinas universitarias, cada una desarrollada según su método propio, se relacionen y puedan dialogar entre sí con un pluralismo que excluye toda hiperespecialización, apariencia de pluralismo y la amenaza actual más dañina para la vida intelectual y universitaria. Además la encarnación del Verbo eterno en Jesús de Nazaret no es obstáculo para ello, pues la encarnación no constituye un límite para Dios, sino que significa la accesibilidad de su palabra infinita para la mente humana finita

The end-to-end testbed of the Optical Metrology System on-board LISA Pathfinder

LISA Pathfinder is a technology demonstration mission for the Laser Interferometer Space Antenna (LISA). The main experiment on-board LISA Pathfinder is the so-called LISA Technology Package (LTP) which has the aim to measure the differential acceleration between two free-falling test masses with an accuracy of 3x10^(-14) ms^(-2)/sqrt[Hz] between 1 mHz and 30 mHz. This measurement is performed interferometrically by the Optical Metrology System (OMS) on-board LISA Pathfinder. In this paper we present the development of an experimental end-to-end testbed of the entire OMS. It includes the interferometer and its sub-units, the interferometer back-end which is a phasemeter and the processing of the phasemeter output data. Furthermore, 3-axes piezo actuated mirrors are used instead of the free-falling test masses for the characterisation of the dynamic behaviour of the system and some parts of the Drag-free and Attitude Control System (DFACS) which controls the test masses and the satellite. The end-to-end testbed includes all parts of the LTP that can reasonably be tested on earth without free-falling test masses. At its present status it consists mainly of breadboard components. Some of those have already been replaced by Engineering Models of the LTP experiment. In the next steps, further Engineering Models and Flight Models will also be inserted in this testbed and tested against well characterised breadboard components. The presented testbed is an important reference for the unit tests and can also be used for validation of the on-board experiment during the mission

Thermal diagnostic of the Optical Window on board LISA Pathfinder

Vacuum conditions inside the LTP Gravitational Reference Sensor must comply with rather demanding requirements. The Optical Window (OW) is an interface which seals the vacuum enclosure and, at the same time, lets the laser beam go through for interferometric Metrology with the test masses. The OW is a plane-parallel plate clamped in a Titanium flange, and is considerably sensitive to thermal and stress fluctuations. It is critical for the required precision measurements, hence its temperature will be carefully monitored in flight. This paper reports on the results of a series of OW characterisation laboratory runs, intended to study its response to selected thermal signals, as well as their fit to numerical models, and the meaning of the latter. We find that a single pole ARMA transfer function provides a consistent approximation to the OW response to thermal excitations, and derive a relationship with the physical processes taking place in the OW. We also show how system noise reduction can be accomplished by means of that transfer function.Comment: 20 pages, 14 figures; accepted for publication in Class. Quantum Gra

Demographic limitation processes

20 páginas, 2 figuras, 1 tabla, 3 cuadros.-- Editor: Valladares, F.[ES]: Procesos de limitación demográfica. Este capítulo ofrece una revisión de los factores que afectan a la regeneración natural de la vegetación, considerando la serie de etapas demográficas que determinan la dinámica demográfica de una pobla- ción. Son muy escasos los estudios disponibles que analizan toda la serie de eventos concatenados entre la producción de flores y frutos y el establecimiento exitoso de una planta adulta reproductiva. También son escasos los trabajos que permiten establecer los efectos aplazados que tienen las interacciones con animales a lo largo del ciclo de regeneración. La aproximación que proponemos cuantifica las pérdidas de propágulos en cada etapa demográfica e identifica “cuellos de botella” del reclutamiento que pue- den colapsar la regeneración natural de una especie. Revisamos una serie de casos de estudio que ilustran diversos procesos de limitación demográfica. El uso de técnicas explícitamente demográficas es fundamental para comprender la evolución de las especies forestales Mediterráneas y para diseñar actuaciones de preservación de sus poblaciones y de su extraordinaria diversidad.[EN]: We review the main factors influencing recruitment limitation in Mediterranean woody species by considering the sequential stages that determine the demographic cycle. Very few studies examine the whole set of demographic stages, from flower production to the successful establishment of adult reproductive plants, and their influence on recruitment. There are also few studies exploring the delayed effects of animal interactions throughout the regeneration cycle, but the information on stage-specific effects is more detailed. We propose an approach that quantifies the propagule losses at each sequential demographic stage and identifies demographic bottlenecks that might collapse population growth. We review a series of case studies illustrating different limitation processes. The use of explicit demographic techniques is central to understand the evolution of Mediterranean woody species and to design sound, ecologically-based, conservation plans to preserve their extraordinary diversity.Juan Arroyo agradece la financiación otorgada a los proyectos 4474-91 (National Geographic Society), PB 91-0894, PB95-0551, 1FD97-0743-CO3-03, PB98-1144, BOS200307924-CO2-01 (MECD, MCyT). Los trabajos de Pedro Jordano han sido financiados con proyectos MECD y MCyT (1FD97-0743-CO3-01, PB 96-0857, BOS2000-1366-C02-01 y REN2003-00273), así como la Junta de Andalucía (PAI). Juan Luis García-Castaño estuvo financiado durante su período pre-doctoral con una beca FPU, AP96-27318040. El trabajo de Fernando Pulido ha sido parcialmente financiado por una beca FPI de la Junta de Extremadura y los proyectos regional IPR-0A050 y estatal BOS2002- 12222-E del Ministerio de Ciencia y Tecnología. Los trabajos de Patricio García-Fayos han sido financiados con proyectos MCyT (1FD97-0551), de la Generalitat Valenciana (02-046) y de la Institució Alfons el Magnánim (02-046)Peer reviewe

Burnout subtypes and their clinical implications: A theoretical proposal for specific therapeutic approaches

Abstract: Burnout is associated with a poor perception of health status, psychosomatic disorders and physical illness. The aim of this study is to construct a comprehensive theoretical proposal for a therapeutic intervention that is sensitive to the different clinical manifestations of this state. In order to do this, the frenetic, under-challenged and worn-out subtypes of burnout are presented in a systematic manner, together with the interventions that may provide suitable management for each subtype. Said clinical profiles may represent different stages in the progression of burnout, and have specific dysfunctional mechanisms that require a choice of adjusted intervention strategies according to the characteristics of each particular case. Finally, the degree of dedication to work and its clinical repercussions are put forward as a hypothesis to explain the progressive impairment caused by burnout, and as a target on which primary, secondary and tertiary prevention strategies could be founded.Resumen: Subtipos de burnout e implicaciones clínicas: Una propuesta teórica basada en abordajes terapéuticos específicos. El burnout se asocia con un peor estatus de salud percibida, trastornos psicosomáticos y enfermedades físicas. El objetivo del presente trabajo es articular una propuesta teórica comprehensiva de intervención terapéutica sensible a las diferen­tes manifestaciones clínicas de dicho estado. Para ello, se presentan de forma sistemática los subtipos de burnout frenético, sin-desafíos y desgastado, así como las intervenciones que pueden proporcionar un adecuado manejo de cada subtipo. Dichos perfiles clínicos parecen representar momentos diferentes en la progresión del burnout, con mecanismos disfuncionales especí­ficos, que obligan a optar por estrategias de intervención ajustadas a las características de cada caso en particular. Finalmente, se propone el grado de dedicación en el trabajo, y sus repercusiones clínicas, como hipótesis para explicar la progresiva erosión que supone el burnout, y como eje sobre el que fundamentar las estrategias de prevención primaria, secundaria y terciaria.Abstract: Burnout is associated with a poor perception of health status, psychosomatic disorders and physical illness. The aim of this study is to construct a comprehensive theoretical proposal for a therapeutic intervention that is sensitive to the different clinical manifestations of this state. In order to do this, the frenetic, under-challenged and worn-out subtypes of burnout are presented in a systematic manner, together with the interventions that may provide suitable management for each subtype. Said clinical profiles may represent different stages in the progression of burnout, and have specific dysfunctional mechanisms that require a choice of adjusted intervention strategies according to the characteristics of each particular case. Finally, the degree of dedication to work and its clinical repercussions are put forward as a hypothesis to explain the progressive impairment caused by burnout, and as a target on which primary, secondary and tertiary prevention strategies could be founded.Resumen: Subtipos de burnout e implicaciones clínicas: Una propuesta teórica basada en abordajes terapéuticos específicos. El burnout se asocia con un peor estatus de salud percibida, trastornos psicosomáticos y enfermedades físicas. El objetivo del presente trabajo es articular una propuesta teórica comprehensiva de intervención terapéutica sensible a las diferen­tes manifestaciones clínicas de dicho estado. Para ello, se presentan de forma sistemática los subtipos de burnout frenético, sin-desafíos y desgastado, así como las intervenciones que pueden proporcionar un adecuado manejo de cada subtipo. Dichos perfiles clínicos parecen representar momentos diferentes en la progresión del burnout, con mecanismos disfuncionales especí­ficos, que obligan a optar por estrategias de intervención ajustadas a las características de cada caso en particular. Finalmente, se propone el grado de dedicación en el trabajo, y sus repercusiones clínicas, como hipótesis para explicar la progresiva erosión que supone el burnout, y como eje sobre el que fundamentar las estrategias de prevención primaria, secundaria y terciaria

WEDM Manufacturing Method for Noncircular Gears, Using CAD/CAM Software

Noncircular gears are used in several technological applications in order to enhance the performance of different mechanical instruments (flow meters, bikes, internal combustion engines, etc.), in order to unify speed in assembly lines and in research. Noncircular gears are typically manufactured by shaving: milling each tooth or by generation. This requires controlling the geometric and kinematic variables in the process. In this research, a method to manufacture elliptical and oval gears using wire electro-discharge machining (WEDM) is presented. This is a continuous procedure, and its performance is not inferior to the previously mentioned methods. Mathematical models for manufacturing elliptical and oval gears are presented, simulations are carried out, and this method is implemented in a WEDM machine, obtaining two pairs of elliptical and oval gears. This method could be useful in the manufacturing of injection moulds or custom-made metallic gears. Finally, a discussion using bibliographic references is presented about the surface finish and the consequences of using WEDM in comparison to other shaving methods which do not involve a material phase change

Water harvesting for young trees using Peltier modules powered by photovoltaic solar energy

Young trees transplanted from nursery into open field require a minimum amount of soil moisture to successfully root in their new location, especially in dry-climate areas. One possibility is to obtain the required water from air moisture. This can be achieved by reducing the temperature of a surface below the air dew point temperature, inducing water vapor condensation on the surface. The temperature of a surface can be reduced by applying the thermoelectric effect, with Peltier modules powered by electricity. Here, we present a system that generates electricity with a solar photovoltaic module, stores it in a battery, and finally, uses the electricity at the moment in which air humidity and temperature are optimal to maximize water condensation while minimizing energy consumption. Also, a method to reduce the evaporation of the condensed water is proposed. The objective of the system is to sustain young plants in drier periods, rather than exclusively irrigating young plants to boost their growth

Building the genomic nation: ‘Homo Brasilis’ and the ‘Genoma Mexicano’ in comparative cultural perspective

This is the final version of the article. Available from SAGE Publications via the DOI in this record.This article explores the relationship between genetic research, nationalism and the construction of collective social identities in Latin America. It makes a comparative analysis of two research projects – the ‘Genoma Mexicano’ and the ‘Homo Brasilis’ – both of which sought to establish national and genetic profiles. Both have reproduced and strengthened the idea of their respective nations of focus, incorporating biological elements into debates on social identities. Also, both have placed the unifying figure of the mestizo/mestiço at the heart of national identity constructions, and in so doing have displaced alternative identity categories, such as those based on race. However, having been developed in different national contexts, these projects have had distinct scientific and social trajectories: in Mexico, the genomic mestizo is mobilized mainly in relation to health, while in Brazil the key arena is that of race. We show the importance of the nation as a frame for mobilizing genetic data in public policy debates, and demonstrate how race comes in and out of focus in different Latin American national contexts of genomic research, while never completely disappearing.This article arises out of two projects: ‘Race, genomics and mestizaje (mixture) in Latin America: a comparative approach’ funded by the ESRC (grant RES-062-23-1914) and ‘Public engagement with genomic research and race in Latin America’ funded by The Leverhulme Trust (grant RPG-044)

U-Pb zircon age of Ordovician magmatism in the Albera Massif (Eastern Pyrenees)

New geochronological data from the Albera Massif confirm the presence of an Early – Mid Ordovician igneous event (472 - 465Ma) recorded in the pre-Variscan rocks of the Pyrenees. This event resulted in the emplacement of a large granitic body in the lower part of the pre-Upper Ordovician metasedimentary succession and in the intrusion of a series of metric sized dykes in the middle and upper parts of it. The two types of igneous rocks were gneissified during subsequent Variscan deformation. The geochronological data confirm the occurrence of the gneiss as having derived from an Ordovician intrusive sheet, as in other Pyrenean massifs. The dykes are considered to be the subvolcanic equivalent of the intrusive sheet. The data also provide insight into the age of the metasedimentary series of the massif and enable us to correlate the dated rocks with other gneissic and subvolcanic bodies of the Variscan massifs of the Pyrenees and Iberia