Expectancies, Socioeconomic Status, and Self-Rated Health: Use of the Simplified TOMCATS Questionnaire

Background: Coping has traditionally been measured with inventories containing many items meant to identify specific coping strategies. An alternative is to develop a shorter inventory that focusses on coping expectancies which may determine the extent to which an individual attempts to cope actively. Purpose: This paper explores the usefulness and validity of a simplified seven-item questionnaire (Theoretically Originated Measure of the Cognitive Activation Theory of Stress, TOMCATS) for response outcome expectancies defined either as positive (“coping”), negative (“hopelessness”), or none (“helplessness”). The definitions are based on the Cognitive Activation Theory of Stress (CATS; Ursin and Eriksen, Psychoneuroendocrinology, 29(5):567–92, 2004). The questionnaire was tested in two different samples. First, the questionnaire was compared with a traditional test of coping and then tested for validity in relation to socioeconomic differences in self-reported health. Methods: The first study was a comparison of the brief TOMCATS with a short version of the Utrecht Coping List (UCL; Eriksen et al., Scand J Psychol, 38(3):175–82, 1997). Both questionnaires were tested in a population of 1,704 Norwegian municipality workers. The second study was a cross-sectional analysis of TOMCATS, subjective and objective socioeconomic status, and health in a representative sample of the Swedish working population in 2003– 2005 (N011,441). Results: In the first study, the coping item in the TOMCATS questionnaire showed an expected significant positive correlation with the UCL factors of instrumental masteryoriented coping and negative correlations with passive and depressive scores. There were also the expected correlations for the helplessness and hopelessness scores, but there was no clear distinction between helplessness and hopelessness in the way they correlated with the UCL. In the second study, the coping item in TOMCATS and the three-item helplessness scores showed clear and monotonous gradients over a subjective socioeconomic status (SES) ladder. Positive response outcome expectancy (“coping”) was related to high subjective SES and no expectancy (“helplessness”) to low subjective SES. In a model including age and sex, TOMCATS scores explained more variance (r200.16) in self-reported health than both subjective (r200.08) and objective SES (r200.02). Conclusion: The brief TOMCATS questionnaire showed acceptable and significant correlations with a traditional coping questionnaire and is sensitive enough to register systematic differences in response outcome expectancies across the socioeconomic ladder. The results furthermore confirm that psychological and learning factors contribute to the socioeconomic gradient in health.publishedVersio

Characterization of Susceptibility Artifacts in MR-thermometry PRFS-based during Laser Interstitial Thermal Therapy

Magnetic Resonance Thermometry (MRT) is demonstrating huge abilities to guide laser interstitial thermal therapy (LITT) in several organs, such as the brain. Among the methods to perform MRT, Proton Resonance Frequency (PRF) shift holds significant benefits, like tissue independence. Despite its potential, PRF shift-based MRT holds significant challenges affecting the accuracy of reconstructed temperature maps. In particular, susceptibility artifacts due to gas-bubble formation are an important source of error in temperature maps in MRT-guided LITT. This work presents the characterization of the susceptibility artifacts in MRT-guided LITT and the measurement of its size. LITT was performed in gelatin-based phantoms, at 5 W, 2 W, 1 W, and 0.5 W under MRI guidance with a 1.5 T clinical MRI scanner. Temperature images were obtained with a 3D EPI (Echo planar imaging) prototype sequence. Areas of temperature errors were defined as zones of negative temperature variation <-2 degrees C. Moreover, we have analyzed the artifact shape in sagittal, axial and coronal planes. The analysis demonstrates a double-lobe shape for the susceptibility artifact mainly distributed in the sagittal plane. Also, the higher laser power caused a bigger artifact area. Temperature errors of similar to 80 degrees C proved the necessity to avoid susceptibility artifact generation during MRT-guided LITT. The analysis of the influence of the laser power on the artifact has suggested that using low laser power (0.5 W) helps avoid this measurement error

Characterization of susceptibility artifacts in magnetic resonance thermometry images during laser interstitial thermal therapy: dimension analysis and temperature error estimation

Objective: Laser interstitial thermal therapy (LITT) is a minimally invasive procedure used to treat a lesion through light irradiation and consequent temperature increase. Magnetic Resonance Thermometry Imaging (MRTI) provides a multidimensional measurement of the temperature inside the target thus enabling accurate monitoring of the zone of damage during the procedure. In proton resonance frequency shift-based thermometry, artifacts in the images may strongly interfere with the estimated temperature maps. In our work, after noticing the formation of the dipolar-behavior artifact linkable to magnetic susceptibility changes during in vivo LITT, an investigation of susceptibility artifacts in tissue-mimicking phantoms was implemented. Approach: The artifact was characterized: (i) by measuring the area and total volume of error regions and their evolution during the treatment; and (ii) by comparison with temperature reference provided by three temperature sensing needles. Lastly, a strategy to avoid artifacts formation was devised by using the temperature-sensing needles to implement a temperature-controlled LITT. Main results: The artifact appearance was associated with gas bubble formation and with unwanted treatment effects producing magnetic susceptibility changes when 2 W laser power was set. The analysis of the artifact's dimension demonstrated that in the sagittal plane the dipolar-shape artifact may consistently spread following the temperature trend until reaching a volume 8 times bigger than the ablated one. Also, the artifact shape is quite symmetric with respect to the laser tip. An absolute temperature error showing a negative Gaussian profile in the area of susceptibility artifact with values up to 64.4 °C was estimated. Conversely, a maximum error of 2.8 °C is measured in the area not-affected by artifacts and far from the applicator tip. Finally, by regulating laser power, susceptibility artifacts formation was avoided, and appreciable thermal damage was induced. Significance: Such findings may help in improving the MRTI-based guidance of thermal therapies

Machine Learning for Determining Interactions between Air Pollutants and Environmental Parameters in Three Cities of Iran

Air pollution, as one of the most significant environmental challenges, has adversely affected the global economy, human health, and ecosystems. Consequently, comprehensive research is being conducted to provide solutions to air quality management. Recently, it has been demonstrated that environmental parameters, including temperature, relative humidity, wind speed, air pressure, and vegetation, interact with air pollutants, such as particulate matter (PM), NO2, SO2, O3, and CO, contributing to frameworks for forecasting air quality. The objective of the present study is to explore these interactions in three Iranian metropolises of Tehran, Tabriz, and Shiraz from 2015 to 2019 and develop a machine learning-based model to predict daily air pollution. Three distinct assessment criteria were used to assess the proposed XGBoost model, including R squared (R2), Root Mean Squared Error (RMSE), and Mean Absolute Error (MAE). Preliminary results showed that although air pollutants were significantly associated with meteorological factors and vegetation, the formulated model had low accuracy in predicting (R2PM2.5 = 0.36, R2PM10 = 0.27, R2NO2 = 0.46, R2SO2 = 0.41, R2O3 = 0.52, and R2CO = 0.38). Accordingly, future studies should consider more variables, including emission data from manufactories and traffic, as well as sunlight and wind direction. It is also suggested that strategies be applied to minimize the lack of observational data by considering second-and third-order interactions between parameters, increasing the number of simultaneous air pollution and meteorological monitoring stations, as well as hybrid machine learning models based on proximal and satellite data

Does acute passive stretching increase muscle length in children with cerebral palsy?

This article has been made available through the Brunel Open Access Publishing Fund. Copyright @ The Authors. This article is distributed under the terms of the Creative Commons Attribution Noncommercial License which permits any noncommercial use, distribution, and reproduction in anymedium, provided the original author(s) and the source are credited.Background: Children with spastic cerebral palsy experience increased muscle stiffness and reduced muscle length, which may prevent elongation of the muscle during stretch. Stretching performed either by the clinician, or children themselves is used as a treatment modality to increase/maintain joint range of motion. It is not clear whether the associated increases in muscle–tendon unit length are due to increases in muscle or tendon length. The purpose was to determine whether alterations in ankle range of motion in response to acute stretching were accompanied by increases in muscle length, and whether any effects would be dependent upon stretch technique. Methods: Eight children (6–14 y) with cerebral palsy received a passive dorsiflexion stretch for 5 × 20 s to each leg, which was applied by a physiotherapist or the children themselves. Maximum dorsiflexion angle, medial gastrocnemius muscle and fascicle lengths, and Achilles tendon length were calculated at a reference angle of 10° plantarflexion, and at maximum dorsiflexion in the pre- and post-stretch trials. Findings: All variables were significantly greater during pre- and post-stretch trials compared to the resting angle, and were independent of stretch technique. There was an approximate 10° increase in maximum dorsiflexion post-stretch, and this was accounted for by elongation of both muscle (0.8 cm) and tendon (1.0 cm). Muscle fascicle length increased significantly (0.6 cm) from pre- to post-stretch. Interpretation: The results provide evidence that commonly used stretching techniques can increase overall muscle, and fascicle lengths immediately post-stretch in children with cerebral palsy

Analysis of cavitation artifacts in Magnetic Resonance Imaging Thermometry during laser ablation monitoring

: Magnetic Resonance Thermometry Imaging (MRTI) holds great potential in laser ablation (LA) monitoring. It provides the real-time multidimensional visualization of the treatment effect inside the body, thus enabling accurate intraoperative prediction of the thermal damage induced. Despite its great potential., thermal maps obtained with MRTI may be affected by numerous artifacts. Among the sources of error producing artifacts in the images., the cavitation phenomena which could occur in the tissue during LA induces dipole-structured artifacts. In this work., an analysis of the cavitation artifacts occurring during LA in a gelatin phantom in terms of symmetry in space and symmetry of temperature values was performed. Results of 2 Wand 4 W laser power were compared finding higher symmetry for the 2 W case in terms of both dimensions of artifact-lobes and difference in temperature values extracted in specular pixels in the image. This preliminary investigation of artifact features may provide a step forward in the identification of the best strategy to correct and avoid artifact occurrence during thermal therapy monitoring. Clinical Relevance- This work presents an analysis of cavitation artifacts in MRTI from LA which must be corrected to avoid error in the prediction of thermal damage during LA monitoring

Employers' views on the promotion of workplace health and wellbeing: A qualitative study

Background: The evidence surrounding the value of workplace health promotion in positively influencing employees' health and wellbeing via changes to their health behaviours is growing. The aim of the study was to explore employers' views on the promotion of workplace health and wellbeing and the factors affecting these views. Methods: Using a qualitative phenomenological approach, 10 focus groups were conducted with employers selected from a range of industries and geographical locations within Western Australia. The total sample size was 79. Results: Three factors were identified: employers' conceptualization of workplace health and wellbeing; employers' descriptions of (un)healthy workers and perceptions surrounding the importance of healthy workers; and employers' beliefs around the role the workplace should play in influencing health. Conclusions: Progress may be viable in promoting health and wellbeing if a multifaceted approach is employed taking into account the complex factors influencing employers' views. This could include an education campaign providing information about what constitutes health and wellbeing beyond the scope of occupational health and safety paradigms along with information on the benefits of workplace health and wellbeing aligned with perceptions relating to healthy and unhealthy workers

Can group-based reassuring information alter low back pain behavior? A cluster-randomized controlled trial?

Background Low back pain (LBP) is common in the population and multifactorial in nature, often involving negative consequences. Reassuring information to improve coping is recommended for reducing the negative consequences of LBP. Adding a simple non-threatening explanation for the pain (temporary muscular dysfunction) has been successful at altering beliefs and behavior when delivered with other intervention elements. This study investigates the isolated effect of this specific information on future occupational behavior outcomes when delivered to the workforce. Design A cluster-randomized controlled trial. Methods Publically employed workers (n=505) from 11 Danish municipality centers were randomized at center-level (cluster) to either intervention (two 1-hour group-based talks at the workplace) or control. The talks provided reassuring information together with a simple non-threatening explanation for LBP - the ‘functional-disturbance’-model. Data collections took place monthly over a 1-year period using text message tracking (SMS). Primary outcomes were self-reported days of cutting down usual activities and work participation. Secondary outcomes were self-reported back beliefs, work ability, number of healthcare visits, bothersomeness, restricted activity, use of pain medication, and sadness/depression. Results There was no between-group difference in the development of LBP during follow-up. Cumulative logistic regression analyses showed no between-group difference on days of cutting down activities, but increased odds for more days of work participation in the intervention group (OR=1.83 95% CI: 1.08-3.12). Furthermore, the intervention group was more likely to report: higher work ability, reduced visits to healthcare professionals, lower bothersomeness, lower levels of sadness/depression, and positive back beliefs. Conclusion Reassuring information involving a simple non-threatening explanation for LBP significantly increased the odds for days of work participation and higher work ability among workers who went on to experience LBP during the 12-month follow-up. Our results confirm the potential for public-health education for LBP, and add to the discussion of simple versus multidisciplinary interventions