Nanoscale quantum dot infrared sensors with photonic crystal cavity

We report high performance infrared sensors that are based on intersubband transitions in nanoscale self-assembled quantum dots combined with a microcavity resonator made with a high-index-contrast two-dimensional photonic crystal. The addition of the photonic crystal cavity increases the photocurrent, conversion efficiency, and the signal to noise ratio (represented by the specific detectivity D*) by more than an order of magnitude. The conversion efficiency of the detector at Vb=–2.6 V increased from 7.5% for the control sample to 95% in the PhC detector. In principle, these photonic crystal resonators are technology agnostic and can be directly integrated into the manufacturing of present day infrared sensors using existing lithographic tools in the fabrication facility

Further support for the alignment of cattle along magnetic field lines: reply to Hert et al.

Hert et al. (J Comp Physiol A, 2011) challenged one part of the study by Begall et al. (PNAS 105:13451–13455, 2008) claiming that they could not replicate the finding of preferential magnetic alignment of cattle recorded in aerial images of Google Earth. However, Hert and co-authors used a different statistical approach and applied the statistics on a sample partly unsuitable to examine magnetic alignment. About 50% of their data represent noise (resolution of the images is too poor to enable unambiguous measurement of the direction of body axes, pastures are on slopes, near settlements or high voltage power-lines, etc.). Moreover, the authors have selected for their analysis only ~ 40% of cattle that were present on the pastures analyzed. Here, we reanalyze all usable data and show that cattle significantly align their body axes in North–South direction on pastures analyzed by Hert and co-authors. This finding thus supports our previous study. In addition, we show by using aerial Google Earth images with good resolution, that the magnetic alignment is more pronounced in resting than in standing cattle

The Quadrupole Magnets for the LHC Injection Transfer Lines

Two injection transfer lines, each about 2.8 km long, are being built to transfer protons at 450 GeV from the Super Proton Synchrotron (SPS) to the Large Hadron Collider (LHC). A total of 180 quadrupole magnets are required; they are produced in the framework of the contribution of the Russian Federation to the construction of the LHC. The classical quadrupoles, built from laminated steel cores and copper coils, have a core length of 1.4 m, an inscribed diameter of 32 mm and a strength of 53.5 T/m at a current of 530 A. The total weight of one magnet is 1.1 ton. For obtaining the required field quality at the small inscribed diameter, great care in the stamping of the laminations and the assembly of quadrants is necessary. Special instruments have been developed to measure, with a precision of some mm, the variations of the pole gaps over the full length of the magnet and correlate them to the obtained field distribution. The design has been developed in a collaboration between BINP and CERN. Fabrication and the magnetic measurements are done at BINP and should be finished at the end of the year 2000

Steel septum magnets for the LHC beam injection and extraction

The Large Hadron Collider (LHC) will be a superconducting accelerator and collider to be installed in the existing underground LEP ring tunnel at CERN. It will provide proton-proton collisions with a centre of mass energy of 14 TeV. The proton beams coming from the SPS will be injected into the LHC at 450 GeV by vertically deflecting kicker magnets and horizontally deflecting steel septum magnets (MSI). The proton beams will be dumped from the LHC with the help of two extraction systems comprising horizontally deflecting kicker magnets and vertically deflecting steel septum magnets (MSD). The MSI and MSD septa are laminated iron-dominated magnets using an all welded construction. The yokes are constructed from two different half cores, called coil core and septum core. The septum cores comprise circular holes for the circulating beams. This avoids the need for careful alignment of the usually wedge-shaped septum blades used in classical Lambertson magnets. The MSI and MSD septum magnets were designed and built in a collaboration between IHEP (Protvino) and CERN (Geneva). This paper presents the magnet design, the experience gathered during the preseries construction, and gives the results of detailed magnetic measurements of the MSIB and MSDC preseries magnets

Flexible quasi-three-dimensional terahertz electric metamaterials,

Abstract: We fabricate quasi-three-dimensional terahertz electric metamaterials by stacking multiple single-layer planar metamaterials fabricated on thin, flexible polyimide substrates. Terahertz time-domain spectroscopy is used to characterize their transmission properties, with which we obtain the frequency dependent complex effective dielectric functions. Increasing the number of layers reduces the resonant transmission minimum, while the extracted effective dielectric functions are independent on the number of layers. The results reveal that the real portions of the dielectric functions only show positive values, however, decreasing the thickness of the polyimide substrates, and thereby the spacing between the adjacent split-ring resonator layers, enables negative electric response

Production properties of K*(892) vector mesons and their spin alignment as measured in the NOMAD experiment

First measurements of K*(892) mesons production properties and their spin alignment in nu_mu charged current (CC) and neutral current (NC) interactions are presented. The analysis of the full data sample of the NOMAD experiment is performed in different kinematic regions. For K*+ and K*- mesons produced in nu_mu CC interactions and decaying into K0 pi+/- we have found the following yields per event: (2.6 +/- 0.2 (stat.) +/- 0.2 (syst.))% and (1.6 +/- 0.1 (stat.) +/- 0.1 (syst.))% respectively, while for the K*+ and K*- mesons produced in nu NC interactions the corresponding yields per event are: (2.5 +/- 0.3 (stat.) +/- 0.3 (syst.))% and (1.0 +/- 0.3 (stat.) +/- 0.2 (syst.))%. The results obtained for the rho00 parameter, 0.40 +/- 0.06 (stat) +/- 0.03 (syst) and 0.28 +/- 0.07 (stat) +/- 0.03 (syst) for K*+ and K*- produced in nu_mu CC interactions, are compared to theoretical predictions tuned on LEP measurements in e+e- annihilation at the Z0 pole. For K*+ mesons produced in nu NC interactions the measured rho00 parameter is 0.66 +/- 0.10 (stat) +/- 0.05 (syst).Comment: 20 p

A Precise Measurement of the Muon Neutrino-Nucleon Inclusive Charged Current Cross-Section off an Isoscalar Target in the Energy Range 2.5 < E_\nu < 40 GeV by NOMAD

We present a measurement of the muon neutrino-nucleon inclusive charged current cross-section, off an isoscalar target, in the neutrino energy range $2.5 \leq E_\nu \leq 40$ GeV. The significance of this measurement is its precision, $\pm 4$% in $2.5 \leq E_\nu \leq 10$ GeV, and $\pm 2.6$% in $10 \leq E_\nu \leq 40$ GeV regions, where significant uncertainties in previous experiments still exist, and its importance to the current and proposed long baseline neutrino oscillation experiments.Comment: 14 pages, 3 figures, submitted to Phys.Lett.

Search for the exotic Θ+\Theta^+ resonance in the NOMAD experiment

A search for exotic Theta baryon via Theta -> proton +Ks decay mode in the NOMAD muon neutrino DIS data is reported. The special background generation procedure was developed. The proton identification criteria are tuned to maximize the sensitivity to the Theta signal as a function of xF which allows to study the Theta production mechanism. We do not observe any evidence for the Theta state in the NOMAD data. We provide an upper limit on Theta production rate at 90% CL as 2.13 per 1000 of neutrino interactions.Comment: Accepted to European Physics Journal

A Measurement of Coherent Neutral Pion Production in Neutrino Neutral Current Interactions in NOMAD

We present a study of exclusive neutral pion production in neutrino-nucleus Neutral Current interactions using data from the NOMAD experiment at the CERN SPS. The data correspond to $1.44 \times 10^6$ muon-neutrino Charged Current interactions in the energy range $2.5 \leq E_{\nu} \leq 300$ GeV. Neutrino events with only one visible $\pi^0$ in the final state are expected to result from two Neutral Current processes: coherent $\pi^0$ production, {\boldmath $\nu + {\cal A} \to \nu + {\cal A} + \pi^0$} and single $\pi^0$ production in neutrino-nucleon scattering. The signature of coherent $\pi^0$ production is an emergent $\pi^0$ almost collinear with the incident neutrino while $\pi^0$'s produced in neutrino-nucleon deep inelastic scattering have larger transverse momenta. In this analysis all relevant backgrounds to the coherent $\pi^0$ production signal are measured using data themselves. Having determined the backgrounds, and using the Rein-Sehgal model for the coherent $\pi^0$ production to compute the detection efficiency, we obtain {\boldmath $4630 \pm 522 (stat) \pm 426 (syst)$} corrected coherent-$\pi^0$ events with $E_{\pi^0} \geq 0.5$ GeV. We measure {\boldmath $\sigma (\nu {\cal A} \to \nu {\cal A} \pi^0) = [ 72.6 \pm 8.1(stat) \pm 6.9(syst) ] \times 10^{-40} cm^2/nucleus$}. This is the most precise measurement of the coherent $\pi^0$ production to date.Comment: 23 pages, 9 figures, accepted for publication in Phys. Lett.