72 research outputs found
Developing Model-Based Design Evaluation for Pipelined A/D Converters
This paper deals with a prospective approach of modeling, design evaluation and error determination applied to pipelined A/D converter architecture. In contrast with conventional ADC modeling algorithms targeted to extract the maximum ADC non-linearity error, the innovative approach presented allows to decompose magnitudes of individual error sources from a measured or simulated response of an ADC device. Design Evaluation methodology was successfully applied to Nyquist rate cyclic converters in our works [13]. Now, we extend its principles to pipelined architecture. This qualitative decomposition can significantly contribute to the ADC calibration procedure performed on the production line in term of integral and differential nonlinearity. This is backgrounded by the fact that the knowledge of ADC performance contributors provided by the proposed method helps to adjust the values of on-chip converter components so as to equalize (and possibly minimize) the total non-linearity error. In this paper, the design evaluation procedure is demonstrated on a system design example of pipelined A/D converter. Significant simulation results of each stage of the design evaluation process are given, starting from the INL performance extraction proceeded in a powerful Virtual Testing Environment implemented in Maple™ software and finishing by an error source simulation, modeling of pipelined ADC structure and determination of error source contribution, suitable for a generic process flow
Guidelines on the Switch Transistors Sizing Using the Symbolic Description for the Cross-Coupled Charge Pump
This paper presents a symbolic description of the design process of the switch transistors for the cross- coupled charge pump applications. Discrete-time analog circuits are usually designed by the numerical algorithms in the professional simulator software which can be an extremely time-consuming process in contrast to described analytical procedure. The significant part of the pumping losses is caused by the reverse current through the switch transistors due to continuous-time voltage change on the main capacitors. Design process is based on the analytical expression of the time response characteristics of the pump stage as an analog system with using BSIM model equations. The main benefit of the article is the analytical transistors sizing formula, so that the maximum voltage gain is achieved. The diode transistor is dimensioned for the pump requirements, as the maximal pump output ripple voltage, current, etc. The characteristics of the proposed circuit has been verified by simulation in ELDO Spice. Results are valid for N-stage charge pump and also applicable for other model equations as PSP, EKV
The Communication Library DIALOG for iFDAQ of the COMPASS Experiment
Modern experiments in high energy physics impose
great demands on the reliability, the efficiency, and the data rate
of Data Acquisition Systems (DAQ). This contribution focuses on
the development and deployment of the new communication library
DIALOG for the intelligent, FPGA-based Data Acquisition System
(iFDAQ) of the COMPASS experiment at CERN. The iFDAQ
utilizing a hardware event builder is designed to be able to readout
data at the maximum rate of the experiment. The DIALOG library is a
communication system both for distributed and mixed environments,
it provides a network transparent inter-process communication layer.
Using the high-performance and modern C++ framework Qt and its
Qt Network API, the DIALOG library presents an alternative to
the previously used DIM library. The DIALOG library was fully
incorporated to all processes in the iFDAQ during the run 2016.
From the software point of view, it might be considered as a
significant improvement of iFDAQ in comparison with the previous
run. To extend the possibilities of debugging, the online monitoring
of communication among processes via DIALOG GUI is a desirable
feature. In the paper, we present the DIALOG library from several
insights and discuss it in a detailed way. Moreover, the efficiency
measurement and comparison with the DIM library with respect to
the iFDAQ requirements is provided
Transverse-momentum-dependent Multiplicities of Charged Hadrons in Muon-Deuteron Deep Inelastic Scattering
A semi-inclusive measurement of charged hadron multiplicities in deep
inelastic muon scattering off an isoscalar target was performed using data
collected by the COMPASS Collaboration at CERN. The following kinematic domain
is covered by the data: photon virtuality (GeV/), invariant
mass of the hadronic system GeV/, Bjorken scaling variable in the
range , fraction of the virtual photon energy carried by the
hadron in the range , square of the hadron transverse momentum
with respect to the virtual photon direction in the range 0.02 (GeV/ (GeV/). The multiplicities are presented as a
function of in three-dimensional bins of , , and
compared to previous semi-inclusive measurements. We explore the
small- region, i.e. (GeV/), where
hadron transverse momenta are expected to arise from non-perturbative effects,
and also the domain of larger , where contributions from
higher-order perturbative QCD are expected to dominate. The multiplicities are
fitted using a single-exponential function at small to study
the dependence of the average transverse momentum on , and . The power-law behaviour of the
multiplicities at large is investigated using various
functional forms. The fits describe the data reasonably well over the full
measured range.Comment: 28 pages, 20 figure
Collins and Sivers transverse-spin asymmetries in inclusive muoproduction of mesons
The production of vector mesons in deep inelastic scattering is an
interesting yet scarsely explored channel to study the transverse spin
structure of the nucleon and the related phenomena. The COMPASS collaboration
has performed the first measurement of the Collins and Sivers asymmetries for
inclusively produced mesons. The analysis is based on the data set
collected in deep inelastic scattering in using a
beam impinging on a transversely polarized target. The
mesons are selected from oppositely charged hadron pairs, and the
asymmetries are extracted as a function of the Bjorken- variable, the
transverse momentum of the pair and the fraction of the energy carried by
the pair. Indications for positive Collins and Sivers asymmetries are observed
Spin Density Matrix Elements in Exclusive Meson Muoproduction
We report on a measurement of Spin Density Matrix Elements (SDMEs) in hard
exclusive meson muoproduction at COMPASS using 160~GeV/ polarised
and beams impinging on a liquid hydrogen target. The
measurement covers the kinematic range 5.0~GeV/ 17.0~GeV/,
1.0 (GeV/) 10.0 (GeV/) and 0.01 (GeV/) 0.5 (GeV/). Here, denotes the mass of the final
hadronic system, the virtuality of the exchanged photon, and
the transverse momentum of the meson with respect to the
virtual-photon direction. The measured non-zero SDMEs for the transitions of
transversely polarised virtual photons to longitudinally polarised vector
mesons () indicate a violation of -channel helicity
conservation. Additionally, we observe a dominant contribution of
natural-parity-exchange transitions and a very small contribution of
unnatural-parity-exchange transitions, which is compatible with zero within
experimental uncertainties. The results provide important input for modelling
Generalised Parton Distributions (GPDs). In particular, they may allow one to
evaluate in a model-dependent way the role of parton helicity-flip GPDs in
exclusive production
Corrigendum to "Transverse extension of partons in the proton probed in the sea-quark range by measuring the DVCS cross section" [Phys. Lett. B 793 (2019) 188]
n/
Triangle Singularity as the Origin of the a1(1420)
The COMPASS Collaboration experiment recently discovered a new isovector resonancelike signal with axial-vector quantum numbers, the a(1)(1420), decaying to f(0)(980)(pi). With a mass too close to and a width smaller than the axial-vector ground state a(1)(1260), it was immediately interpreted as a new light exotic meson, similar to the X, Y, Z states in the hidden-charm sector. We show that a resonancelike signal fully matching the experimental data is produced by the decay of the a(1) (1260) resonance into K* (-> K pi) (K) over bar and subsequent rescattering through a triangle singularity into the coupled f(0)(980)p channel. The amplitude for this process is calculated using a new approach based on dispersion relations. The triangle-singularity model is fitted to the partial-wave data of the COMPASS experiment. Despite having fewer parameters, this fit shows a slightly better quality than the one using a resonance hypothesis and thus eliminates the need for an additional resonance in order to describe the data. We thereby demonstrate for the first time in the lightmeson sector that a resonancelike structure in the experimental data can be described by rescattering through a triangle singularity, providing evidence for a genuine three-body effect
Double production in pion-nucleon scattering at COMPASS
We present the study of the production of double mesons using
COMPASS data collected with a 190 GeV/ beam scattering off NH,
Al and W targets. Kinematic distributions of the collected double
events are analysed, and the double production cross section is
estimated for each of the COMPASS targets. The results are compared to
predictions from single- and double-parton scattering models as well as the
pion intrinsic charm and the tetraquark exotic resonance hypotheses. It is
demonstrated that the single parton scattering production mechanism gives the
dominant contribution that is sufficient to describe the data. An upper limit
on the double intrinsic charm content of pion is evaluated. No significant
signatures that could be associated with exotic tetraquarks are found in the
double mass spectrum.Comment: 12 pages, 4 figure
Light isovector resonances in π-p →π-π-π+p at 190 GeV/c
We have performed the most comprehensive resonance-model fit of π-π-π+ states using the results of our previously published partial-wave analysis (PWA) of a large data set of diffractive-dissociation events from the reaction π-+p→π-π-π++precoil with a 190 GeV/c pion beam. The PWA results, which were obtained in 100 bins of three-pion mass, 0.5<2.5 GeV/c2, and simultaneously in 11 bins of the reduced four-momentum transfer squared, 0.1<1.0 (GeV/c)2, are subjected to a resonance-model fit using Breit-Wigner amplitudes to simultaneously describe a subset of 14 selected waves using 11 isovector light-meson states with JPC=0-+, 1++, 2++, 2-+, 4++, and spin-exotic 1-+ quantum numbers. The model contains the well-known resonances π(1800), a1(1260), a2(1320), π2(1670), π2(1880), and a4(2040). In addition, it includes the disputed π1(1600), the excited states a1(1640), a2(1700), and π2(2005), as well as the resonancelike a1(1420). We measure the resonance parameters mass and width of these objects by combining the information from the PWA results obtained in the 11 t′ bins. We extract the relative branching fractions of the ρ(770)π and f2(1270)π decays of a2(1320) and a4(2040), where the former one is measured for the first time. In a novel approach, we extract the t′ dependence of the intensity of the resonances and of their phases. The t′ dependence of the intensities of most resonances differs distinctly from the t′ dependence of the nonresonant components. For the first time, we determine the t′ dependence of the phases of the production amplitudes and confirm that the production mechanism of the Pomeron exchange is common to all resonances. We have performed extensive systematic studies on the model dependence and correlations of the measured physical parameters
- …