Numerical simulations of three-dimensional drop collisions

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/77346/1/AIAA-13136-185.pd

Numerical Simulations of Drop Collisions

Three-dimensional simulations of the off-axis collisions of two drops are presented. The full Navier-Stokes equations are solved by a Front-Tracking/Finite-Difference method that allows a fully deformable fluid interface and the inclusion of surface tension. The drops are accelerated towards each other by a body force that is turned off before the drops collide. Depending on whether the interface between the drops is ruptured or not, the drops either bounce or coalesce. For drops that coalesce, the impact parameter, which measures how far the drops are off the symmetry line, determines the eventual outcome of the collision. For low impact parameters, the drops coalesce permanently, but for higher impact parameters, a grazing collision, where the drops coalesce and then stretch apart again is observed. The results are in agreement with experimental observations

Numerical simulations of drop collisions

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/76145/1/AIAA-1994-835-900.pd

Head‐on collision of drops—A numerical investigation

The head‐on collision of equal sized drops is studied by full numerical simulations. The Navier–Stokes equations are solved for the fluid motion both inside and outside the drops using a front tracking/finite difference technique. The drops are accelerated toward each other by a body force that is turned off before the drops collide. When the drops collide, the fluid between them is pushed outward leaving a thin layer bounded by the drop surface. This layer gets progressively thinner as the drops continue to deform, and in several of our calculations we artificially remove this double layer at prescribed times, thus modeling rupture. If no rupture takes place, the drops always rebound, but if the film is ruptured the drops may coalesce permanently or coalesce temporarily and then split again. Although the numerically predicted boundaries between permanent and temporary coalescence are found to be consistent with experimental observations, the exact location of these boundaries in parameter space is found to depend on the time of rupture. © 1996 American Institute of Physics.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/71337/2/PHFLE6-8-1-29-1.pd

Methodology for artificial microswimming using magnetic actuation

We propose a methodology for swimming at low-Reynolds-number flows based on ciliary motion of a microswimmer using magnetic actuation of artificial cilia.By solving the coupled magnetic-elastic-hydrodynamic problem, we demonstrate nonreciprocal effective and recovery strokes for cilia that nicely mimic natural cilia beating. Cilia drag forces, microswimmer net displacement, velocity, and efficiency are calculated, and we show the model can swim using a prespecified magnetic actuation. The proposed methodology can be used for devising biomedical microdevices that swim in viscous flows inside the human body

Computations of drop collision and coalescence

Computations of drops collision and coalescence are presented. The computations are made possible by a recently developed finite difference/front tracking technique that allows direct solutions of the Navier-Stokes equations for a multi-fluid system with complex, unsteady internal boundaries. This method has been used to examine the boundaries between the various collision modes for drops of equal size and two examples, one of a 'reflective' collision and another of a 'grazing' collision is shown. From drops of unequal size, coalescence can result in considerable mixing between the fluid from the small and the large drop. This problem is discussed and one example showed. In many cases it is necessary to account also for heat transfer along with the fluid mechanics. We show two preliminary results where we are using extensions of the method to simulate such a problem. One example shows pattern formation among many drops moving due to thermal migration, the other shows unstable evolution of a solidification front

Associations between inter-limb asymmetries in jump and change of direction speed tests and physical performance in adolescent female soccer players

The association between asymmetries in jump and change of direction (COD) with physical performance in several sports show inconclusive results. The purposes of this study were to: (1) measure inter-limb asymmetries in three distinct groups in adolescent female soccer players and, (2) to determine the association between inter-limb asymmetries and physical performance in different age groups. Fifty-four players were distributed in three age groups: U-18, U-16 and U-14. All of them performed a series of jumps, sprints and change of direction speed tests. Asymmetries were assessed as the percentage difference between limbs, with the equation: 100/Max value (right and left) * in value (right and left) * −1 + 100. Mean inter-limb asymmetries were 2.91%, 4.82% and 11.6% for 180° COD, single leg hop and single leg countermovement jump tests respectively, but higher percentages of asymmetries were observed in many players individually. U-18 and U-16 showed significant differences on 180° left COD compared to U-14. Effect size (ES): 0.80 and 0.74, respectively; U-18 presented differences on single left leg hop test compared to U-14, ES: −0.72; U-16 also showed differences on 40 m speed compared to U-14, ES 0.87 (All p 0.05). Jumping and COD physical tests show asymmetries in adolescent female soccer players, but these asymmetries do not interfere with physical performance. The largest asymmetry was observed in the single leg countermovement jump, and no asymmetries between groups were found. Due to the high variability in the direction of asymmetries, it is recommended to consider players’ individual asymmetries for designing specific training programs

A systematic review of velocity and accelerometer thresholds in soccer

Background: Velocity and acceleration have been highlighted as the most critical variables in soccer. However, there is a consensus gap in defining different levels of effort. Aim: The purpose of this systematic review is to identify if it is a consensus in those articles that proposed a threshold to establish (i) movement intensity at different velocities using tracking systems and (ii) accelerations using inertial measure ment units, classifying the justification methods. Method: A systematic review of Cochrane Library, EBSCO, PubMed, Scielo, Scopus, SPORTDiscus, and Web of Science databases was performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Results: Of the 1983 studies initially identified, 39 were thoroughly reviewed, and their outcome measures were extracted and analyzed. Conclusion: The 40-m maximal linear sprint and physical fitness tests are the most commonly used methods to generate speed and acceleration thresholds in soccer. However, there is substantial heterogeneity in locomotor test procedures and workload zones established from these performance data. Studies diverged when considering the use of individualized thresholds. The low sampling rate (≤ 10 Hz) in the publications calculating acceleration and deceleration demands should also be interpreted cautiously. The present study collected evidence to help professionals process and interpret external load data. More interventional work is needed to confirm the value of fitness-based individualizations.9E1A-F9DD-3EB8 | Filipe Manuel ClementeN/

In-Season Internal Load and Wellness Variations in Professional Women Soccer Players: Comparisons between Playing Positions and Status

The internal intensity monitoring in soccer has been used more in recent years in men’s football; however, in women’s soccer, the existing literature is still scarce. The aims of this study were threefold: (a) to describe the weekly variations of training monotony, training strain and acute: chronic workload ratio through session Rated Perceived Exertion (s-RPE); (b) to describe weekly variations of Hooper Index [stress, fatigue, Delayed Onset Muscle Soreness (DOMS) and sleep]; and (c) to compare those variations between playing positions and player status. Nineteen players (24.1 ± 2.7 years) from a Portuguese BPI League professional team participated in this study. All variables were collected in a 10-week in-season period with three training sessions and one match per week during the 2019/20 season. Considering the overall team, the results showed that there were some associations between Hooper Index categories and s-RPE like stress or fatigue (0.693, p < 0.01), stress or DOMS (0.593, p < 0.01), stress or s-RPE (−0.516, p < 0.05) and fatigue or DOMS (0.688, p < 0.01). There were no differences between all parameters in playing positions or player status. In conclusion, the study revealed that higher levels of fatigue and DOMS occur concurrently with better nights of sleep. Moreover, any in-season variations concerning internal load and perceived wellness seems independent of position or status in outfield players. The data also showed that the higher the players’ reported stress, the lower the observed s-RPE, thus possibly indicating a mutual interference of experienced stress levels on the assimilation of training intensity by elite women soccer players.Portuguese Foundation for Science and Technology, I.P., Grant/Award Number UIDP/04748/2020FCT–Fundação para a Ciência e Tecnologia (UID04045/2020)Fundação para a Ciência e Tecnologia/ Ministério da Ciência, Tecnologia e Ensino Superior through national funds and when applicable co-funded EU funds under the project UIDB/50008/202

Fluid-structure interaction simulation of prosthetic aortic valves : comparison between immersed boundary and arbitrary Lagrangian-Eulerian techniques for the mesh representation

In recent years the role of FSI (fluid-structure interaction) simulations in the analysis of the fluid-mechanics of heart valves is becoming more and more important, being able to capture the interaction between the blood and both the surrounding biological tissues and the valve itself. When setting up an FSI simulation, several choices have to be made to select the most suitable approach for the case of interest: in particular, to simulate flexible leaflet cardiac valves, the type of discretization of the fluid domain is crucial, which can be described with an ALE (Arbitrary Lagrangian-Eulerian) or an Eulerian formulation. The majority of the reported 3D heart valve FSI simulations are performed with the Eulerian formulation, allowing for large deformations of the domains without compromising the quality of the fluid grid. Nevertheless, it is known that the ALE-FSI approach guarantees more accurate results at the interface between the solid and the fluid. The goal of this paper is to describe the same aortic valve model in the two cases, comparing the performances of an ALE-based FSI solution and an Eulerian-based FSI approach. After a first simplified 2D case, the aortic geometry was considered in a full 3D set-up. The model was kept as similar as possible in the two settings, to better compare the simulations' outcomes. Although for the 2D case the differences were unsubstantial, in our experience the performance of a full 3D ALE-FSI simulation was significantly limited by the technical problems and requirements inherent to the ALE formulation, mainly related to the mesh motion and deformation of the fluid domain. As a secondary outcome of this work, it is important to point out that the choice of the solver also influenced the reliability of the final results