Generation of pressures over 40 GPa using Kawai-type multi-anvil press with tungsten carbide anvils

We have generated over 40 GPa pressures, namely, 43 and 44 GPa, at ambient temperature and 2000 K, respectively, using Kawai-type multi-anvil presses (KMAP) with tungsten carbide anvils for the first time. These high-pressure generations were achieved by combining the following pressure-generation techniques: (1) precisely aligned guide block systems, (2) high hardness of tungsten carbide, (3) tapering of second-stage anvil faces, (4) materials with high bulk modulus in a high-pressure cell, and (5) high heating efficiency

Seismic detection of the martian core by InSight

A plethora of geophysical, geo- chemical, and geodynamical observations indicate that the terrestrial planets have differentiated into silicate crusts and mantles that surround a dense core. The latter consists primarily of Fe and some lighter alloying elements (e.g., S, Si, C, O, and H) [1]¿. The Martian meteorites show evidence of chalcophile element depletion, suggesting that the otherwise Fe-Ni- rich core likely contains a sulfide component, which influences physical state

Resonances and Lander Modes Observed by InSight on Mars (1–9 Hz)

The National Aeronautics and Space Administration’s (NASAs) Interior exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) lander successfully touched down on Mars in November 2018, and, for the first time, a seismometer was deployed on the surface of the planet. The seismic recordings reveal diurnal and seasonal changes of the broadband noise level that are consistent with variations of the local atmospheric conditions. The seismic data include a variety of spectral peaks, which are interpreted as wind-excited,mechanical resonances of the lander, resonances of the subsurface, or artifacts produced in themeasurement system. Understanding the origin of these signals is critical for the detection and characterization of marsquakes as well as for studies investigating the ambient noise. We identify the major spectral peaks up to 9 Hz, corresponding to the frequency range the most relevant to observed marsquakes. We track the variations in frequency, amplitude, and polarization of these peaks over the duration of the mission so far. The majority of these peaks can readily be classified as measurement artifacts or lander resonances (lander modes), of which the latter have a temperature-dependent peak frequency and a wind-sensitive amplitude. Of particular interest is a prominent resonance at 2.4 Hz, which is used to discriminate between seismic events and local noise and is possibly produced by a subsurface structure. In contrast to the lander modes, the 2.4 Hz resonance has distinctly different features: (1) a broad and stable spectral shape, slightly shifted on each component; (2) predominantly vertical energy; (3) temperature-independent peak frequency; (4) comparatively weak amplification by local winds, though there is a slow change in the diurnal and seasonal amplitude; and (5) excitation during all seismic events that excite this frequency band. Based on these observations, we suggest that the 2.4 Hz resonance is the only mode below 9 Hz that could be related to a local ground structureThe authors acknowledge National Aeronautics and Space Administration (NASA), The National Centre for Space Studies of France (CNES), their partner agencies and institutions (UK Space Agency [UKSA], Swiss Space Office [SSO], Deutsches Zentrum für Luft- und Raumfahrt [DLR], Jet Propulsion Laboratory [JPL], Institut du Physique du Globe de Paris Centre National de la Recherche Scientifique [IPGP-CNRS], Eidgenössische Technische Hochschule Zürich [ETHZ], Imperial College London [IC], Max-Planck Institut for Solar System Research [MPS-MPG]), and the flight operations team at JPL, SEIS on Mars Operation Center (SISMOC), Mars SEIS Package Data Service (MSDS), Incorporated Research Institutions for Seismology Data Management Center (IRIS-DMC), and Planetary Data System (PDS) for providing Standard for the Exchange of Earthquake Data (SEED) Seismic Experiment for Interior Structure (SEIS) data. We acknowledge funding from (1) Swiss State Secretariat for Education, Research, and Innovation (SEFRI project “MarsQuake Service-Preparatory Phase”), (2) ETH Research grant ETH-06 17-02, and (3) ETH+02 19-1: Planet MARS. The Swiss contribution in implementation of the SEIS electronics was made possible through funding from the federal Swiss Space Office (SSO), the contractual and technical support of the European Space Agency – Programme de Développement d'Expériences scientifiques (ESA-PRODEX) office. The French authors acknowledge the French Space Agency CNES and French National Agency for Research (ANR) (ANR-14-CE36-0012-02 and ANR‐19-CE31-0008-08) for support in the Science analysis. This is Interior exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) contribution 202.Peer reviewe

Pre-mission InSights on the Interior of Mars

Abstract The Interior exploration using Seismic Investigations, Geodesy, and Heat Trans- port (InSight) Mission will focus on Mars’ interior structure and evolution. The basic structure of crust, mantle, and core form soon after accretion. Understanding the early differentiation process on Mars and how it relates to bulk composition is key to improving our understanding of this process on rocky bodies in our solar system, as well as in other solar systems. Current knowledge of differentiation derives largely from the layers observed via seismology on the Moon. However, the Moon’s much smaller diameter make it a poor analog with respect to interior pressure and phase changes. In this paper we review the current knowledge of the thickness of the crust, the diameter and state of the core, seismic attenuation, heat flow, and interior composition. InSight will conduct the first seismic and heat flow measurements of Mars, as well as more precise geodesy. These data reduce uncertainty in crustal thickness, core size and state, heat flow, seismic activity and meteorite impact rates by a factor of 3–10× relative to previous estimates. Based on modeling of seismic wave propagation, we can further constrain interior temperature, composition, and the location of phase changes. By combining heat flow and a well constrained value of crustal thickness, we can estimate the distribution of heat producing elements between the crust and mantle. All of these quantities are key inputs to models of interior convection and thermal evolution that predict the processes that control subsurface temperature, rates of volcanism, plume distribution and stability, and convective state. Collectively these factors offer strong controls on the overall evolution of the geology and habitability of Mars

Psychosocial impact of undergoing prostate cancer screening for men with BRCA1 or BRCA2 mutations.

OBJECTIVES: To report the baseline results of a longitudinal psychosocial study that forms part of the IMPACT study, a multi-national investigation of targeted prostate cancer (PCa) screening among men with a known pathogenic germline mutation in the BRCA1 or BRCA2 genes. PARTICPANTS AND METHODS: Men enrolled in the IMPACT study were invited to complete a questionnaire at collaborating sites prior to each annual screening visit. The questionnaire included sociodemographic characteristics and the following measures: the Hospital Anxiety and Depression Scale (HADS), Impact of Event Scale (IES), 36-item short-form health survey (SF-36), Memorial Anxiety Scale for Prostate Cancer, Cancer Worry Scale-Revised, risk perception and knowledge. The results of the baseline questionnaire are presented. RESULTS: A total of 432 men completed questionnaires: 98 and 160 had mutations in BRCA1 and BRCA2 genes, respectively, and 174 were controls (familial mutation negative). Participants' perception of PCa risk was influenced by genetic status. Knowledge levels were high and unrelated to genetic status. Mean scores for the HADS and SF-36 were within reported general population norms and mean IES scores were within normal range. IES mean intrusion and avoidance scores were significantly higher in BRCA1/BRCA2 carriers than in controls and were higher in men with increased PCa risk perception. At the multivariate level, risk perception contributed more significantly to variance in IES scores than genetic status. CONCLUSION: This is the first study to report the psychosocial profile of men with BRCA1/BRCA2 mutations undergoing PCa screening. No clinically concerning levels of general or cancer-specific distress or poor quality of life were detected in the cohort as a whole. A small subset of participants reported higher levels of distress, suggesting the need for healthcare professionals offering PCa screening to identify these risk factors and offer additional information and support to men seeking PCa screening

Constraints on the shallow elastic and anelastic structure of Mars from InSight seismic data

Mars’s seismic activity and noise have been monitored since January 2019 by the seismometer of the InSight (Interior Exploration using Seismic Investigations, Geodesy and Heat Transport) lander. At night, Mars is extremely quiet; seismic noise is about 500 times lower than Earth’s microseismic noise at periods between 4 s and 30 s. The recorded seismic noise increases during the day due to ground deformations induced by convective atmospheric vortices and ground-transferred wind-generated lander noise. Here we constrain properties of the crust beneath InSight, using signals from atmospheric vortices and from the hammering of InSight’s Heat Flow and Physical Properties (HP3) instrument, as well as the three largest Marsquakes detected as of September 2019. From receiver function analysis, we infer that the uppermost 8–11 km of the crust is highly altered and/ or fractured. We measure the crustal diffusivity and intrinsic attenuation using multiscattering analysis and find that seismic attenuation is about three times larger than on the Moon, which suggests that the crust contains small amounts of volatiles