252 research outputs found
Performance Test of Infrasound Sensor in Low-temperature Environment ─ Potential for Application in Antarctic Observation ─
For infrasound monitoring in Antarctica, there is a need for infrasound sensors with low power consumption and high resistance to low-temperature environments. A new-type infrasound sensor (TYPE7744N/5002A) manufactured by ACO Co., Ltd. (Japan) with the cooperation of the Earthquake Research Institute, the University of Tokyo, achieves less than half the power consumption of existing models. To evaluate the applicability of the new sensor to Antarctic observation, we conducted a low-temperature (-30℃) test for four types of sensors, including the new one. We compared the results to
those from a room temperature (21℃) test and examined changes in amplitude-phase characteristics based on a reference sensor (Model60Vx2, Chaparral Physics), proven in use in polar regions. There were no problems in the operation of the new sensor during the 30 days of the test. Spectral power ratio to the reference sensor changed up to 19% compared to the room temperature test, suggesting that the sensitivity fluctuates with temperature. Phase characteristics were not significantly affected by low temperatures. Future trials are desired to evaluate the long-term stability of the new sensor, e.g., by conducting experimental overwintering observations at Syowa Station
Observation of and confirmation of its large branching fraction
The baryonic decay is observed, and the
corresponding branching fraction is measured to be
, where the first uncertainty is statistical
and second systematic. The data sample used in this analysis was collected with
the BESIII detector operating at the BEPCII double-ring collider with
a center-of-mass energy of 4.178~GeV and an integrated luminosity of
3.19~fb. The result confirms the previous measurement by the CLEO
Collaboration and is of greatly improved precision, which may deepen our
understanding of the dynamical enhancement of the W-annihilation topology in
the charmed meson decays
Evidence of a resonant structure in the cross section between 4.05 and 4.60 GeV
The cross section of the process for
center-of-mass energies from 4.05 to 4.60~GeV is measured precisely using data
samples collected with the BESIII detector operating at the BEPCII storage
ring.
Two enhancements are clearly visible in the cross section around 4.23 and
4.40~GeV.
Using several models to describe the dressed cross section yields stable
parameters for the first enhancement, which has a mass of 4228.6 \pm 4.1 \pm
6.3 \un{MeV}/c^2 and a width of 77.0 \pm 6.8 \pm 6.3 \un{MeV}, where the
first uncertainties are statistical and the second ones are systematic.
Our resonant mass is consistent with previous observations of the
state and the theoretical prediction of a molecule.
This result is the first observation of associated with an
open-charm final state.
Fits with three resonance functions with additional , ,
, , or a new resonance, do not show significant
contributions from either of these resonances. The second enhancement is not
from a single known resonance. It could contain contributions from
and other resonances, and a detailed amplitude analysis is required to better
understand this enhancement
Observation and study of the decay
We report the observation and study of the decay
using events
collected with the BESIII detector. Its branching fraction, including all
possible intermediate states, is measured to be
. We also report evidence for a structure,
denoted as , in the mass spectrum in the GeV/
region. Using two decay modes of the meson ( and
), a simultaneous fit to the mass spectra is
performed. Assuming the quantum numbers of the to be , its
significance is found to be 4.4, with a mass and width of MeV/ and MeV, respectively, and a
product branching fraction
. Alternatively, assuming , the
significance is 3.8, with a mass and width of MeV/ and MeV, respectively, and a product
branching fraction
. The angular distribution of
is studied and the two assumptions of the
cannot be clearly distinguished due to the limited statistics. In all
measurements the first uncertainties are statistical and the second systematic.Comment: 10 pages, 6 figures and 4 table
Observation of and Improved Measurements of
Using a data sample corresponding to an integrated luminosity of
2.93~fb recorded by the BESIII detector at a center-of-mass energy of
GeV, we present an analysis of the decays and . By performing a partial wave
analysis, the -wave contribution to
is observed to be % with a statistical significance greater
than 10, besides the dominant -wave contribution. This is the first
observation of the -wave contribution. We measure the branching fractions
, , and . An upper limit
of is set at the 90% confidence level. We also obtain the hadronic
form factor ratios of at assuming the
single-pole dominance parameterization:
,
Evidence for the decays of and
We study the hadronic decays of to the final states
and , using an annihilation
data sample of 567 pb taken at a center-of-mass energy of 4.6 GeV with
the BESIII detector at the BEPCII collider. We find evidence for the decays
and with
statistical significance of and , respectively.
Normalizing to the reference decays and
, we obtain the ratios of the branching fractions
and to be and , respectively. The upper limits at the 90\% confidence level are
set to be and . Using BESIII measurements of the
branching fractions of the reference decays, we determine
() and
(). Here, the first uncertainties are statistical and the second
systematic. The obtained branching fraction of is
consistent with the previous measurement, and the branching fraction of
is measured for the first
time.Comment: Accepted by Chin. Phys. C : Chin. Phys. C 43, 083002, (2019
B cell–intrinsic signaling through IL-21 receptor and STAT3 is required for establishing long-lived antibody responses in humans
Engagement of cytokine receptors by specific ligands activate Janus kinase–signal transducer and activator of transcription (STAT) signaling pathways. The exact roles of STATs in human lymphocyte behavior remain incompletely defined. Interleukin (IL)-21 activates STAT1 and STAT3 and has emerged as a potent regulator of B cell differentiation. We have studied patients with inactivating mutations in STAT1 or STAT3 to dissect their contribution to B cell function in vivo and in response to IL-21 in vitro. STAT3 mutations dramatically reduced the number of functional, antigen (Ag)-specific memory B cells and abolished the ability of IL-21 to induce naive B cells to differentiate into plasma cells (PCs). This resulted from impaired activation of the molecular machinery required for PC generation. In contrast, STAT1 deficiency had no effect on memory B cell formation in vivo or IL-21–induced immunoglobulin secretion in vitro. Thus, STAT3 plays a critical role in generating effector B cells from naive precursors in humans. STAT3-activating cytokines such as IL-21 thus underpin Ag-specific humoral immune responses and provide a mechanism for the functional antibody deficit in STAT3-deficient patients
Determination of the pseudoscalar decay constant via
Using a data sample collected at an
center-of-mass energy of GeV with the BESIII detector, we
measure the branching fraction of the leptonic decay to
be . Combining our branching fraction with the masses of the
and and the lifetime of the , we determine
.
Using the quark mixing matrix element determined from a
global standard model fit, we evaluate the decay constant
\,MeV. Alternatively,
using the value of calculated by lattice quantum chromodynamics, we
find . These values
of , , and
are each the most precise results to date
Measurements of the branching fractions of the singly Cabibbo-suppressed decays D0→ωη, η(')π0 and η(')η
By analyzing a data sample of 2.93 fb−1 collected at ffiffi
s p ¼ 3.773 GeV with the BESIII detector operated
at the BEPCII storage rings, we measure the branching fractions BðD0 → ωηÞ¼ð2.15 0.17stat
0.15sysÞ × 10−3, BðD0 → ηπ0Þ¼ð0.58 0.05stat 0.05sysÞ × 10−3, BðD0 → η0
π0Þ¼ð0.93 0.11stat
0.09sysÞ × 10−3, BðD0 → ηηÞ¼ð2.20 0.07stat 0.06sysÞ × 10−3 and BðD0 → η0
ηÞ¼ð0.94 0.25stat
0.11sysÞ × 10−3. We note that BðD0 → ωηÞ is measured for the first time and that BðD0 → ηηÞ is measured
with much improved precision
- …