Comparative study of the electronic structures of the In and Sn/In2O3 (111) interfaces

The electronic structure of the transparent semiconductor In2O3 has been studied by angle resolved photoemission spectroscopy upon deposition of metallic indium and also tin on the surface of the semiconductor. By deposition of metallic indium on In2O3 (111) single crystals, we detected the formation of a free-electron like band of effective mass (0.38+-0.05) m0. At low coverages, metallic In shifts the Fermi level of In2O3 to higher energies and a new electronic state forms at the metal/semiconductor interface. This state of two-dimensional character (2D-electron gas) is completely responsible for the electrical conduction in In2O3 (111) at the surface region and has a band dispersion, which does not correspond to the previously found surface accumulation layers in this material. Despite the similarity of the electronic properties of In and Sn, a larger downward banding was observed by Sn coverage, which was not accompanied by the appearance of the surface state.Comment: 5 pages, 3 figure

Interface bonding of a ferromagnetic/semiconductor junction : a photoemission study of Fe/ZnSe(001)

We have probed the interface of a ferromagnetic/semiconductor (FM/SC) heterojunction by a combined high resolution photoemission spectroscopy and x-ray photoelectron diffraction study. Fe/ZnSe(001) is considered as an example of a very low reactivity interface system and it expected to constitute large Tunnel Magnetoresistance devices. We focus on the interface atomic environment, on the microscopic processes of the interface formation and on the iron valence-band. We show that the Fe contact with ZnSe induces a chemical conversion of the ZnSe outermost atomic layers. The main driving force that induces this rearrangement is the requirement for a stable Fe-Se bonding at the interface and a Se monolayer that floats at the Fe growth front. The released Zn atoms are incorporated in substitution in the Fe lattice position. This formation process is independent of the ZnSe surface termination (Zn or Se). The Fe valence-band evolution indicates that the d-states at the Fermi level show up even at submonolayer Fe coverage but that the Fe bulk character is only recovered above 10 monolayers. Indeed, the Fe 1-band states, theoretically predicted to dominate the tunneling conductance of Fe/ZnSe/Fe junctions, are strongly modified at the FM/SC interface.Comment: 23 pages, 5 figures, submitted to Physical review

Sensory profile of Italian Espresso brewed Arabica Specialty Coffee under three roasting profiles with chemical and safety insight on roasted beans

Specialty coffee (SC) has been showing an increasing interest from the consumers which appreciate its traceability and the peculiar flavours from each single origin. Additionally, the processes to which coffee fruits underwent to get green coffee characterise the beans in terms of macromolecules acting as substrates during the roasting. This work evaluates via sensory analysed eight SC, roasted at light, medium, and dark level, submitted to Italian espresso extraction, to assess how different roasting levels exalt the expected cup profile obtained by the suppliers via cupping in origin countries. Finally, roasted beans were characterised for physico-chemical features (pH, titratable acidity, caffeine, melanoidins, polyphenols and acrylamide). Sensory analysis demonstrated that the intermediate roasting level and espresso extraction match better attributes from in-origin cupping. Melanoidins (mmol g−1 coffee d.b.) was able to discriminate among roasting levels (light 0.12 ± 0.01; medium 0.13 ± 0.003; dark 0.14 ± 0.01; α = 0.05). Acrylamide analyses ensured compliance with the food safety standards (light 301.9 ± 37.2 ppb; medium 126.1±19ppb; dark 107.9 ± 22.5ppb). Physico-chemical features were able to cluster samples from different origins within the same roasting level (α = 0.05). Results showed correlations (α = 0.01) between sensory analysis and physico-chemical values: direct for caffeine and astringency, reverse for perceived acidity in relation to astringency, roasted, dried fruits and nutty notes

Character of valence-band states in the Kondo surface alloys CeAgx/Ag(111) and CePt5/Pt(111)

The crystal and electronic structures of the CePt5 and CeAgx surface alloys have been investigated by means of low-energy electron diffraction and angle-resolved photoelectron spectroscopy. From measurements performed near the 4d-4f absorption edge we were able to infer the weight of the 4f-electron spectral function with respect to the single-particle density of states. While the typical Kondo features at the Fermi energy (Kondo resonance and spin-orbit partner) in the CePt5 surface alloy were observed, only the f0 ionization structure and the spin-orbit partner were present in the CeAgx case. From our experiments, and by comparison to model calculations, we were able to estimate the Kondo temperature in the two systems and investigate parameters contributing to the hybridization strength

Multi-phonon Resonant Raman Scattering Predicted in LaMnO3 from the Franck-Condon Process via Self-Trapped Excitons

Resonant behavior of the Raman process is predicted when the laser frequency is close to the orbital excitation energy of LaMnO3 at 2 eV. The incident photon creates a vibrationally excited self-trapped ``orbiton'' state from the orbitally-ordered Jahn-Teller (JT) ground state. Trapping occurs by local oxygen rearrangement. Then the Franck-Condon mechanism activates multiphonon Raman scattering. The amplitude of the $n$-phonon process is first order in the electron-phonon coupling $g$. The resonance occurs {\it via} a dipole forbidden $d$ to $d$ transition. We previously suggested that this transition (also seen in optical reflectivity) becomes allowed because of asymmetric oxygen fluctuations. Here we calculate the magnitude of the corresponding matrix element using local spin-density functional theory. This calculation agrees to better than a factor of two with our previous value extracted from experiment. This allows us to calculate the absolute value of the Raman tensor for multiphonon scattering. Observation of this effect would be a direct confirmation of the importance of the JT electron-phonon term and the presence of self-trapped orbital excitons, or ``orbitons''.Comment: 8 pages and 3 embedded figures. The earlier short version is now replaced by a more complete paper with a slightly different title. This version includes a caculation by density-functional theory of the dipole matrix element for exciting the self-trapped orbital exciton which activates the multiphonon Raman signal

Brain death and postmortem organ donation: Report of a questionnaire from the CENTER-TBI study

Background: We aimed to investigate the extent of the agreement on practices around brain death and postmortem organ donation. Methods: Investigators from 67 Collaborative European NeuroTrauma Effectiveness Research in Traumatic Brain Injury (CENTER-TBI) study centers completed several questionnaires (response rate: 99%). Results: Regarding practices around brain death, we found agreement on the clinical evaluation (prerequisites and neurological assessment) for brain death determination (BDD) in 100% of the centers. However, ancillary tests were required for BDD in 64% of the centers. BDD for nondonor patients was deemed mandatory in 18% of the centers before withdrawing life-sustaining measures (LSM). Also, practices around postmortem organ donation varied. Organ donation after circulatory arrest was forbidden in 45% of the centers. When withdrawal of LSM was contemplated, in 67% of centers the patients with a ventricular drain in situ had this removed, either sometimes or all of the time. Conclusions: This study showed both agreement and some regional differences regarding practices around brain death and postmortem organ donation. We hope our results help quantify and understand potential differences, and provide impetus for current dialogs toward further harmonization of practices around brain death and postmortem organ donation

How do 66 European institutional review boards approve one protocol for an international prospective observational study on traumatic brain injury? Experiences from the CENTER-TBI study

Background The European Union (EU) aims to optimize patient protection and efficiency of health-care research by harmonizing procedures across Member States. Nonetheless, further improvements are required to increase multicenter research efficiency. We investigated IRB procedures in a large prospective European multicenter study on traumatic brain injury (TBI), aiming to inform and stimulate initiatives to improve efficiency. Methods We reviewed relevant documents regarding IRB submission and IRB approval from European neurotrauma centers participating in the Collaborative European NeuroTrauma Effectiveness Research in Traumatic Brain Injury (CENTER-TBI). Documents included detailed information on IRB procedures and the duration from IRB submission until approval(s). They were translated and analyzed to determine the level of harmonization of IRB procedures within Europe. Results From 18 countries, 66 centers provided the requested documents. The primary IRB review was conducted centrally (N = 11, 61%) or locally (N = 7, 39%) and primary IRB approval was obtained after one (N = 8, 44%), two (N = 6, 33%) or three (N = 4, 23%) review rounds with a median duration of respectively 50 and 98 days until primary IRB approval. Additional IRB approval was required in 55% of countries and could increase duration to 535 days. Total duration from submission until required IRB approval was obtained was 114 days (IQR 75-224) and appeared to be shorter after submission to local IRBs compared to central IRBs (50 vs. 138 days, p = 0.0074). Conclusion We found variation in IRB procedures between and within European countries. There were differences in submission and approval requirements, number of review rounds and total duration. Research collaborations could benefit from the implementation of more uniform legislation and regulation while acknowledging local cultural habits and moral values between countries.Peer reviewe