90 research outputs found
How does iron interact with sporopollenin exine capsules? An X-ray absorption study including microfocus XANES and XRF imaging
Sporopollenin exine capsules (SECs) derived from plant spores and pollen grains have been proposed as adsorption, remediation and drug delivery agents. Despite many studies there is scant structural data available. This X-ray absorption investigation represents the first direct structural data on the interaction of metals with SECs and allows elucidation of their structure–property relationships. Fe K-edge XANES and EXAFS data have shown that the iron local environment in SECs (derived from Lycopodium clavatum) reacted with aqueous ferric chloride solutions is similar to that of ferrihydrite (FeOOH) and by implication ferritin. Fe Kα XRF micro-focus experiments show that there is a poor correlation between the iron distribution and the underlying SEC structure indicating that the SEC is coated in the FeOOH material. In contrast, the Fe Kα XRF micro-focus experiments on SECs reacted with aqueous ferrous chloride solutions show that there is a very high correlation between the iron distribution and the SEC structure, indicating a much more specific form of interaction of the iron with the SEC surface functional groups. Fe K-edge XANES and EXAFS data show that the FeII can be easily oxidised to give a structure similar to, but not identical to that in the FeIII case, and that even if anaerobic conditions are used there is still partial oxidation to FeIII
Vivianite-parasymplesite solid solution: A sink for arsenic in ferruginous environments?
Vivianite, a hydrated ferrous phosphate [FeII3(PO4)2 · 8 H2O] that forms in oxygen-poor, but Fe2+-rich conditions is important in nutrient cycling in anoxic environments. In natural vivianites, isomorphic substitution of divalent cations for structural Fe(II) are typical. However, anion substitution is rare; in particular, arsenate (AsVO43−) substitution has never been documented in natural vivianites. Only partial substitution has been reported in synthetic analogues, and parasymplesite [FeII3(AsO4)2 · 8 H2O], the arsenic end member of the vivianite mineral group, is found in hydrothermal deposits. In this study, we detail structural changes in synthesised As-vivianites (FeII3[(PO4)1−x(AsO4)x]2 · 8 H2O) with systematically increased degrees of As(V) substitution (0.22 ≤ x ≤ 0.95). As(V) was successfully incorporated into the vivianite crystal structure, creating a homogenous, solid solution between AsVO43− and PO43−. Like both end members, the intermediate As-vivianites crystallised in the monoclinic system (C2/m space group), and retained the platelet crystal habit of As-free vivianite, even at the highest As(V) substitution. This uniform incorporation of As(V), and its replacement of PO43−, provides a potentially stable sink for arsenic in anoxic soils and sediments, and may have implications in ferruginous early Earth oceans
Computational study of structural and elastic properties of random AlGaInN alloys
In this work we present a detailed computational study of structural and
elastic properties of cubic AlGaInN alloys in the framework of Keating valence
force field model, for which we perform accurate parametrization based on state
of the art DFT calculations. When analyzing structural properties, we focus on
concentration dependence of lattice constant, as well as on the distribution of
the nearest and the next nearest neighbour distances. Where possible, we
compare our results with experiment and calculations performed within other
computational schemes. We also present a detailed study of elastic constants
for AlGaInN alloy over the whole concentration range. Moreover, we include
there accurate quadratic parametrization for the dependence of the alloy
elastic constants on the composition. Finally, we examine the sensitivity of
obtained results to computational procedures commonly employed in the Keating
model for studies of alloys
Redox interactions of Tc(VII), U(VI), and Np(V) with microbially reduced biotite and chlorite
Do ‘passive’ medical titanium surfaces deteriorate in service in the absence of wear?
Globally, more than 1000 tonnes of titanium (Ti) is implanted into patients in the form of biomedical devices on an annual basis. Ti is perceived to be ‘biocompatible’ owing to the presence of a robust passive oxide film (approx. 4 nm thick) at the metal surface. However, surface deterioration can lead to the release of Ti ions, and particles can arise as the result of wear and/or corrosion processes. This surface deterioration can result in peri-implant inflammation, leading to the premature loss of the implanted device or the requirement for surgical revision. Soft tissues surrounding commercially pure cranial anchorage devices (bone-anchored hearing aid) were investigated using synchrotron X-ray micro-fluorescence spectroscopy and X-ray absorption near edge structure. Here, we present the first experimental evidence that minimal load-bearing Ti implants, which are not subjected to macroscopic wear processes, can release Ti debris into the surrounding soft tissue. As such debris has been shown to be pro-inflammatory, we propose that such distributions of Ti are likely to effect to the service life of the device
Processing–structure–property relations of chemically bonded phosphate ceramic composites
ABSTRACT: Mechanical properties and microstructures of a chemically bonded phosphate ceramic (CBPC)
and its composite with 1⋅0 wt% graphite nanoplatelets (GNPs) reinforcement have been investigated. Microstructure was identified by using optical and scanning electron microscopes, X-ray tomography, and X-ray diffraction. In addition, weight loss of the resin at room temperature was studied. The microstructure characterization shows that CBPC is itself a composite with several crystalline (wollastonite and brushite) and
amorphous phases. SEM and micro tomography show a homogeneous distribution of crystalline phases. Bending and compression strength of the CBPC was improved by reducing bubbles via preparation in vacuum
Automated analysis of XANES: A feasibility study of Au reference compounds
With the advent of high-throughput and imaging core level spectroscopies (including X-ray absorption spectroscopy, XAS, as well as electron energy loss spectroscopy, EELS), automated data processing, visualisation and analytics will become a necessity. As a first step towards these objectives we examined the possibilities and limitations of a simple automated XANES peak fitting procedure written in MATLAB, for the parametrisation of XANES features, including ionisation potentials as well as the energies and intensities of electronic transitions. Using a series of Au L3-edge XANES reference spectra we show that most of the relevant information can be captured through a small number of rules applied to constrain the fits. Uncertainty in this strategy arises mostly when the ionisation potential (IP) overlaps with weak electronic transitions or features in the continuum beyond the IP, which can result in ambiguity through multiple equally good fits
First-order valence transition: Neutron diffraction, inelastic neutron scattering, and x-ray absorption investigations on the double perovskite Ba2PrRu0.9Ir0.1O6
Bulk studies have revealed a first-order valence phase transition in
BaPrRuIrO (), which is absent in the
parent compounds with (Pr) and (Pr), which exhibit
antiferromagnetic order with transition temperatures and 72
K, respectively. In the present study, we have used magnetization, heat
capacity, neutron diffraction, inelastic neutron scattering and x-ray
absorption measurements to investigate the nature of the Pr ion in .
The magnetic susceptibility and heat capacity of show a clear sign of
the first order valence phase transition below 175 K, where the Pr valence
changes from 3+ to 4+. Neutron diffraction analysis reveals that
crystallizes in a monoclinic structure with space group at 300 K, but
below 175 K two phases coexist, the monoclinic having the Pr ion in a 3+
valence state and a cubic one () having the Pr ion in a 4+
valence state. Clear evidence of an antiferromagnetic ordering of the Pr and Ru
moments is found in the monoclinic phase of the compound below 110 K
in the neutron diffraction measurements. Meanwhile the cubic phase remains
paramagnetic down to 2 K, a temperature below which heat capacity and
susceptibility measurements reveal a ferromagnetic ordering. High energy
inelastic neutron scattering data reveal well-defined high-energy magnetic
excitations near 264 meV at temperatures below the valence transition. The high
energy excitations are assigned to the Pr ions in the cubic phase and
the low energy excitations to the Pr ions in the monoclinic phase.
Further direct evidence of the Pr valence transition has been obtained from the
x-ray absorption spectroscopy.Comment: 10 pages and 10 figure
Cytotoxic activity of tumor necrosis factor is inhibited by amiloride derivatives without involvement of the Na+/H+ antiporter
AbstractCytotoxicity of tumor necrosis factor (TNF) on L929s cells was efficiently blocked by several amiloride analogs but not by amiloride itself. This protection did not require RNA or protein synthesis. Na+/H+ antiporter-negative L-M(TK−) cells (LAP) could be killed by TNF, showing that the Na+/H+ exchanger is not required for TNF-cytotoxicity. Similar protection against TNF-mediated cell lysis by amiloride derivatives was found for LAP and L929s cells, excluding a blockade of the Na+/H+ antiporter as the cause of the protection against TNF by these agents
Characterisation of carapace composition in developing and adult ostracods (Skogsbergia lerneri) and its potential for biomaterials
The protective carapace of Skogsbergia lerneri, a marine ostracod, is scratch-resistant and transparent. The compositional and structural organisation of the carapace that underlies these properties is unknown. In this study, we aimed to quantify and determine the distribution of chemical elements and chitin within the carapace of adult ostracods, as well as at different stages of ostracod development, to gain insight into its composition. Elemental analyses included X-ray absorption near-edge structure, X-ray fluorescence and X-ray diffraction. Nonlinear microscopy and spectral imaging were performed to determine chitin distribution within the carapace. High levels of calcium (20.3%) and substantial levels of magnesium (1.89%) were identified throughout development. Amorphous calcium carbonate (ACC) was detected in carapaces of all developmental stages, with the polymorph, aragonite, identified in A-1 and adult carapaces. Novel chitin-derived second harmonic generation signals (430/5 nm) were detected. Quantification of relative chitin content within the developing and adult carapaces identified negligible differences in chitin content between developmental stages and adult carapaces, except for the lower chitin contribution in A-2 (66.8 ± 7.6%) compared to A-5 (85.5 ± 10%) (p = 0.03). Skogsbergia lerneri carapace calcium carbonate composition was distinct to other myodocopid ostracods. These calcium polymorphs and ACC are described in other biological transparent materials, and with the consistent chitin distribution throughout S. lerneri development, may imply a biological adaptation to preserve carapace physical properties. Realisation of S. lerneri carapace synthesis and structural organisation will enable exploitation to manufacture biomaterials and biomimetics with huge potential in industrial and military applications
- …