Detecting the role of land use / land cover on river bank processes (Study area: Talar River, Iran)

fp

A comparative study between codes of spectrum for a single degree of freedom (sdof) system in two different hazardous regions.

Since in structure and earthquake engineering design of structures using response spectrum method (RSM) is very important, this study has been performed for a single degree of freedom (SDOF) system. Firstly the concept and the way of construction of response spectrum has been briefly explained. Then the records of some strong earthquakes in USA and Iran as two hazardous regions have been plotted, after that selected response spectrums (RS) of each country has been compared with each other and finally with standard response code of its own country. It was concluded:1) For a given ground motion the response of a SDOF system only depends on its natural vibration period (T) and damping ratio(ζ).2) When the effective damping ratio of a structure increases, its dynamic responses will decrease which demands the use of higher value of damping ratio in the structure. Also the FORTRAN computer programme for solving the Duhamel's Integral has been improved in this paper

GIS multi-criteria analysis by orderedweighted averaging (OWA): Toward an integrated citrus management strategy

This study proposes a site location assessment model for citrus cropland using multi-criteria evaluation (MCE) and the combination of a set of factors for suitability mapping and delineating the suitable areas for citrus production in Ramsar, Iran. It defines an incorporated method for the suitability mapping of the most appropriate sites for citrus cultivars with an emphasis on the multi-criteria decision analysis (MCDA) process. The combination of geographic information system (GIS) and a modified version of the analytic hierarchy process (AHP) based on the ordered weighted averaging (OWA) technique is also emphasized. The OWA is based on two principles, namely: the weights of relative criterion significance and the order weights. Therefore, the participatory technique was employed to outline the set of standards and the important criterion. The results derived from the GIS-OWA technique indicate that the cultivation of citrus is feasible only in limited areas, which make up 6.7% of the total area near the Caspian Sea. This investigation has shown that the GIS-OWA model can be integrated into MCDA to select the optimal site for citrus production. The present research highlights how multi-criteria in GIS can play a considerable role in decision making for evaluating the suitability of selected sites for citrus production

Capability Enhancing of CO₂ Laser Cutting for PMMA Sheet Using Statistical Modeling and Optimization

Laser cutting is a widely used manufacturing process, and the quality of the resulting cuts plays a crucial role in its success. This research employed the Design of Experiments (DOE) to investigate the impact of input process parameters on kerf quality during the laser cutting of 5 mm polymethyl methacrylate (PMMA) sheets. Response surface methodology (RSM) was utilized to model the relationship between the input parameters and the kerf quality, with regression equations developed for each response using the Design Expert software. A statistical analysis revealed the significant effects of high laser power, cutting speed, and focal plane position on kerf quality. Optimization, guided by the desirability function, identified optimal parameter combinations that offered the most favorable tradeoff among various responses. Optimal conditions were found to involve a high laser power, a cutting speed ranging from 4 to 7 mm/s, and a focal plane position at the center. Experiments indicated the suitability of the models for practical applications. An overlay plot analysis revealed a weak negative correlation between the laser power and the cutting speed, while the focal plane’s position could be adjusted independently

Correlation between infill percentages, layer width, and mechanical properties in fused deposition modelling of poly-lactic acid 3D printing

The field of additive manufacturing (AM) has seen a transformation in the production of intricate and complex parts for various applications. Fused Deposition Modelling (FDM), among AM techniques, has garnered significant attention, particularly in fields like fibre-reinforced composites (FRC). In this study, the world of FDM-printed Polylactic Acid (PLA) components is explored, with a focus on how mechanical properties are influenced by infill percentages and layer widths. Through the utilisation of Response Surface Methodology (RSM), the optimisation of FDM-PLA 3D printing for a wide range of biomaterial applications is achieved, along with the unveiling of the potential for remarkable improvements in mechanical performance. Notably, a remarkable 91% reduction in surface roughness for PLA composites was achieved, accompanied by an impressive 25.6% and 34.1% enhancement in the tensile strength and Young’s modulus of fibre-reinforced PLA composites, respectively. This work, positioned at the crossroads of FDM, lays the groundwork for substantial advancements in the realm of additive manufacturing.Peer ReviewedPostprint (published version

Effects of urbanization on river morphology of the Talar River, Mazandarn Province, Iran

In the present study, we investigate the effects of urbanization growth on river morphology in the downstream part of Talar River, east of Mazandaran Province, Iran. Morphological and morphometric parameters in 10 equal sub-reaches were defined along a 11.5 km reach of the Talar River after land cover maps were produced for 1955, 1968, 1994, 2005 and 2013. Land cover types changed extremely during the study period. Residential lands were found to have increased in area by about 1631%, while forest land and riparian vegetation decreased in by approximately 99.9 and 96.2%, respectively. The results of morphometric and morphological factors showed that average channel width (W) for all 11.5 km of the study river decreased by 84% during the study period, while the flow length increased by about 2.14%

Contrasting the mechanical and metallurgical properties of laser welded and gas tungsten arc welded S500MC steel

S500MC steel is a grade of high-strength low-alloy steel (HSLA) which is widely used in the automotive industry and for agricultural machinery and equipment. Considering properties of this alloy, selection of the welding process and parameters becomes essential to ensure that HSLA assemblies meet specific service requirements. In this work, mechanical and metallurgical properties of S500MC steel produced by autogenous laser beam welding (LBW) and automatic gas tungsten arc welding (GTAW) were compared. Tensile testing, metallography, hardness testing, and fractographic analysis were performed on the welded specimens, revealing that the heat input by these welding processes caused significant microstructural changes within the joints. In LBW samples, the heat input about 10 times lower than that in GTAW produced a finer microstructure, narrower fusion zone width, and smaller heat-affected zone. All fractures of the GTAW specimens occurred in the base metal, while all fractures of the LBW specimens occurred in the weld zone, both regardless of the heat input. GTAW joints exhibited higher mechanical properties (even higher than those obtained in the base metal) as compared to LBW joints

Express yourself? Ease to express one’s identity mediates the relationship between national belonging and mental health

A number of studies have reported a positive relationship between levels of national identification and well-being. Although this link is clear, the relationship is likely influenced by a number of other variables. In the current study, we examine two such variables: age and the ease with which people feel they can express their identity in the national context. Participants were drawn from three waves (2008–12) of the biannual New Zealand General Social Survey (NZGSS). The NZGSS consists of a number of questions related to well-being. The current study utilised the questions related to one’s sense of belonging to New Zealand, ease to express one’s identity in New Zealand, and mental health. When controlling for physical health, standard of living, and several demographic control variables, there was a clear relationship between one’s sense of belonging to New Zealand and mental health. Further, this relationship was stronger for older than younger participants. Finally, the ease with which participants felt they could express their identity in New Zealand partially mediated the relationship. Future research should elucidate which specific aspects of their identity people feel is constrained in the national context.A number of studies have reported a positive relationship between levels of national identification and well-being. Although this link is clear, the relationship is likely influenced by a number of other variables. In the current study, we examine two such variables: age and the ease with which people feel they can express their identity in the national context. Participants were drawn from three waves (2008-12) of the biannual New Zealand General Social Survey (NZGSS). The NZGSS consists of a number of questions related to well-being. The current study utilised the questions related to one's sense of belonging to New Zealand, ease to express one?s identity in New Zealand, and mental health. When controlling for physical health, standard of living, and several demographic control variables, there was a clear relationship between one?s sense of belonging to New Zealand and mental health. Further, this relationship was stronger for older than younger participants. Finally, the ease with which participants felt they could express their identity in New Zealand partially mediated the relationship. Future research should elucidate which specific aspects of their identity people feel is constrained in the national context.Publisher PDFPeer reviewe

Global, regional, and national comparative risk assessment of 79 behavioural, environmental and occupational, and metabolic risks or clusters of risks, 1990-2015: a systematic analysis for the Global Burden of Disease Study 2015

SummaryBackground The Global Burden of Diseases, Injuries, and Risk Factors Study 2015 provides an up-to-date synthesis of the evidence for risk factor exposure and the attributable burden of disease. By providing national and subnational assessments spanning the past 25 years, this study can inform debates on the importance of addressing risks in context. Methods We used the comparative risk assessment framework developed for previous iterations of the Global Burden of Disease Study to estimate attributable deaths, disability-adjusted life-years (DALYs), and trends in exposure by age group, sex, year, and geography for 79 behavioural, environmental and occupational, and metabolic risks or clusters of risks from 1990 to 2015. This study included 388 risk-outcome pairs that met World Cancer Research Fund-defined criteria for convincing or probable evidence. We extracted relative risk and exposure estimates from randomised controlled trials, cohorts, pooled cohorts, household surveys, census data, satellite data, and other sources. We used statistical models to pool data, adjust for bias, and incorporate covariates. We developed a metric that allows comparisons of exposure across risk factors—the summary exposure value. Using the counterfactual scenario of theoretical minimum risk level, we estimated the portion of deaths and DALYs that could be attributed to a given risk. We decomposed trends in attributable burden into contributions from population growth, population age structure, risk exposure, and risk-deleted cause-specific DALY rates. We characterised risk exposure in relation to a Socio-demographic Index (SDI). Findings Between 1990 and 2015, global exposure to unsafe sanitation, household air pollution, childhood underweight, childhood stunting, and smoking each decreased by more than 25%. Global exposure for several occupational risks, high body-mass index (BMI), and drug use increased by more than 25% over the same period. All risks jointly evaluated in 2015 accounted for 57·8% (95% CI 56·6–58·8) of global deaths and 41·2% (39·8–42·8) of DALYs. In 2015, the ten largest contributors to global DALYs among Level 3 risks were high systolic blood pressure (211·8 million [192·7 million to 231·1 million] global DALYs), smoking (148·6 million [134·2 million to 163·1 million]), high fasting plasma glucose (143·1 million [125·1 million to 163·5 million]), high BMI (120·1 million [83·8 million to 158·4 million]), childhood undernutrition (113·3 million [103·9 million to 123·4 million]), ambient particulate matter (103·1 million [90·8 million to 115·1 million]), high total cholesterol (88·7 million [74·6 million to 105·7 million]), household air pollution (85·6 million [66·7 million to 106·1 million]), alcohol use (85·0 million [77·2 million to 93·0 million]), and diets high in sodium (83·0 million [49·3 million to 127·5 million]). From 1990 to 2015, attributable DALYs declined for micronutrient deficiencies, childhood undernutrition, unsafe sanitation and water, and household air pollution; reductions in risk-deleted DALY rates rather than reductions in exposure drove these declines. Rising exposure contributed to notable increases in attributable DALYs from high BMI, high fasting plasma glucose, occupational carcinogens, and drug use. Environmental risks and childhood undernutrition declined steadily with SDI; low physical activity, high BMI, and high fasting plasma glucose increased with SDI. In 119 countries, metabolic risks, such as high BMI and fasting plasma glucose, contributed the most attributable DALYs in 2015. Regionally, smoking still ranked among the leading five risk factors for attributable DALYs in 109 countries; childhood underweight and unsafe sex remained primary drivers of early death and disability in much of sub-Saharan Africa. Interpretation Declines in some key environmental risks have contributed to declines in critical infectious diseases. Some risks appear to be invariant to SDI. Increasing risks, including high BMI, high fasting plasma glucose, drug use, and some occupational exposures, contribute to rising burden from some conditions, but also provide opportunities for intervention. Some highly preventable risks, such as smoking, remain major causes of attributable DALYs, even as exposure is declining. Public policy makers need to pay attention to the risks that are increasingly major contributors to global burden. Funding Bill & Melinda Gates Foundation

Long and Short-term Metformin Consumption as a Potential Therapy to Prevent Complications of COVID-19

Purpose: The aim of the study is to evaluate the effect of metformin in complication improvement of hospitalized patients with COVID-19. Methods: This was a randomized clinical trial that involved 189 patients with confirmed COVID-19 infection. Patients in the intervention group received metformin-500 mg twice daily. Patients who received metformin before admission were excluded from the control group. Patients who were discharged before taking at least 2000 mg of metformin were excluded from the study. Primary outcomes were vital signs, need for ICU admission, need for intubation, and mortality. Results: Data showed that patients with diabetes with previous metformin in their regimen had lower percentages of ICU admission and death in comparison with patients without diabetes (11.3% vs. 26.1% (P=0.014) and 4.9% vs. 23.9% (P≤0.001), respectively). Admission time characteristics were the same for both groups except for diabetes and hyperlipidemia, which were significantly different between the two groups. Observations of naproxen consumption on endpoints, duration of hospitalization, and the levels of spO2 did not show any significant differences between the intervention and the control group. The adjusted OR for intubation in the intervention group versus the control group was 0.21 [95% CI, 0.04-0.99 (P=0.047)]. Conclusion: In this trial, metformin consumption had no effect on mortality and ICU admission rates in non-diabetic patients. However, metformin improved COVID-19 complications in diabetic patients who had been receiving metformin prior to COVID-19 infection, and it significantly lowered the intubation rates