An exploratory study to investigate the association between age, physical activity, femoral trochlear cartilage thickness and biomarkers of tissue metabolism in adult males

Purpose: To investigate the association between age, physical activity, femoral trochlear cartilage thickness and biomarkers of tissue metabolism in a cross-sectional sample of adult males. This study utilizes several emerging biomarkers that have been associated with early joint degenerative changes; serum COMP (cartilage oligomeric matrix protein), HA (hyaluronan) and lubricin. Methods: Eighty-one males (age: mean (range): 43(18–70) years; body mass index: 25.2 (21.0–30.6) kg/m2) volunteered. Resting serum COMP, HA and lubricin concentrations were determined via commercially available enzyme-linked immunosorbent assay (ELISA) and femoral trochlear cartilage thickness via supra-patellar ultrasound imaging. Physical activity levels were assessed using questionnaires. Statistical analyses were performed using correlation and regression analyses. Results: Age was correlated with lateral trochlear cartilage thickness (r = − 0.372; p 0.05). Conclusion: This study indicates that older age may be associated with thinner lateral trochlear cartilage and higher cartilage turnover. Being physically active may also be positive for lateral trochlear cartilage thickness. However, overall, both age and physical activity level only account for a small amount of the variability in cartilage thickness and serum biomarkers

Trauma systems in Norway: implementation of national recommendations three years down the line

publishedVersio

The space group classification of topological band insulators

Topological band insulators (TBIs) are bulk insulating materials which feature topologically protected metallic states on their boundary. The existing classification departs from time-reversal symmetry, but the role of the crystal lattice symmetries in the physics of these topological states remained elusive. Here we provide the classification of TBIs protected not only by time-reversal, but also by crystalline symmetries. We find three broad classes of topological states: (a) Gamma-states robust against general time-reversal invariant perturbations; (b) Translationally-active states protected from elastic scattering, but susceptible to topological crystalline disorder; (c) Valley topological insulators sensitive to the effects of non-topological and crystalline disorder. These three classes give rise to 18 different two-dimensional, and, at least 70 three-dimensional TBIs, opening up a route for the systematic search for new types of TBIs.Comment: Accepted in Nature Physic

An open access, integrated XAS data repository at Diamond Light Source

The analysis of reference materials is a fundamental part of the data analysis process, in particular for XAS experiments. The beamline users and more generally the XAS community can greatly benefit from the availability of a reliable and wide base of reference sample spectra, acquired in standard and well-characterized experimental conditions. On B18, the Core EXAFS beamline at the Diamond Light Source, in the past years we have collected a series of XAS data on well characterized compounds. This work constitutes the base for a reference sample database, available as a data analysis tool to the general XAS community. This data repository aims to complement the bare spectroscopic information with characterisation, preparation, provenance, analysis and bibliographic references, so improving the traceability of the deposited information. This integrated approach is the base of success and wide distribution of data repositories in other fields, and we hope it will provide on one side a precious facility for the training of students and researchers new to the technique, and at the same time encourage the discussion of best practices in the data analysis process. The database will be open to the contribution of experimental data from the user community, and will provide bibliographic reference information and access control

Evaluation of Linked Determinants Between Diabetes and Caries

Dental caries and diabetes mellitus, represent two chronic diseases of public health that present statistics of high prevalence worldwide. One of the main problems that affect these conditions is demography, since the least developed countries are those that have less access to public health services and are limited by the economic costs that represent the treatments. In this work is presented the univariate analysis, of a set of demographic determinants obtained from the National Health and Nutrition Examination Surveys (NHANES), in order to identify those that present the most significant information related to estimation of these diseases. According to the results, the age of the subjects is the main determinant describing the simultaneous presence of these diseases, obtaining an area under the curve (AUC) value ≥ 0.846, concluding that age can be used as tool for their preventive diagnosis

Experimental evaluation of the extractability of Fe-bound organic carbon in sediments as a function of carboxyl content

The majority of organic carbon (OC) burial in marine sediments occurs on continental shelves, of which an estimated 10–20% is associated with reactive iron (FeR). The association of OC with FeR (OC-FeR) is thought to facilitate preservation of organic matter (OM) in sediments and therefore represents an important carbon sink. The citrate-bicarbonate-dithionite (CBD) method is used to quantify OC-FeR in marine sediments by reductively dissolving FeR, thereby releasing bound OC. While the CBD method is widely used, it may be less efficient at measuring OC-FeR than currently thought, due to the incomplete reduction of FeR, resulting from the neutral pH conditions required to prevent OM hydrolysis. Additionally, the typical range of values reported for OC-FeR in marine sediments is narrow, despite variation in OM and FeR inputs, OM source types and chemical compositions. This suggests a limitation exists on the amount of OC that can become associated with FeR, and/or that the CBD method is limited in the OC-FeR that it is able to quantify. In assessing the efficiency of the CBD method, we aimed to understand whether methodological errors or (mis)interpretation of these extraction results may contribute to the apparent limitation on OC-FeR values. Here, we synthesised OC-FeR composites with a known FeR phase and known OM moieties, varying in carboxyl content, at neutral pH. These were spiked into OC-free marine sediment, and subject to a CBD extraction to investigate i) the efficiency of CBD for OC extraction; ii) the efficiency of CBD for FeR extraction; ii) how the OC moiety affects the physical parameters of associated FeR minerals; and iii) the impact of OM moiety on OC and Fe release. We show that the CBD method results in only partial dissolution of the most susceptible FeR phase (ferrihydrite) and therefore incomplete removal of bound OC. While as little as ~20% of Fe is released from OC-free ferrihydrite, structural disorder of the mineral phase increases with the inclusion of more OC, resulting in greater losses of up to 62% Fe for carboxyl rich OC-FeR complexes. In addition, our results show that the NaCl control step performed in the CBD method is capable of removing weakly bound OC from FeR, such that inclusion of this OC in the total OC-FeR fraction may increase marine sediments OC-FeR estimates by ~33%. Finally, we suggest that the structure of OC involved in OC-FeR binding can affect quantification of the OC-FeR pool. Our results have important implications for assessing the FeR bound OC fraction in marine sediments and the fate of this OC in the global carbon cycle

Technical note: Uncovering the influence of methodological variations on the extractability of iron-bound organic carbon

Association of organic carbon (OC) with reactive iron (FeR) represents an important mechanism by which OC is protected against remineralisation in soils and marine sediments. Recent studies indicate that the molecular structure of organic compounds and/or the identity of associated FeR phases exert a control on the ability of an OC–FeR complex to be extracted by the citrate–bicarbonate–dithionite (CBD) method. However, many variations of the CBD extraction are used, and these are often uncalibrated to each other, rendering comparisons of OC–FeR values extracted via the different methods impossible. Here, we created synthetic ferrihydrite samples coprecipitated with simple organic structures and subjected these to modifications of the most common CBD method. We altered some of the method parameters (reagent concentration, time of the extraction and sample preparation methods) and measured FeR recovery to determine which (if any) modifications affected the release of FeR from the synthetic sample. We provide an assessment of the reducing capacity of Na dithionite in the CBD method (the amount of Fe reduced by a fixed amount of dithionite) and find that the concentration of dithionite deployed can limit OC–FeR extractability for sediments with a high FeR content. Additionally, we show that extending the length of any CBD extraction offers no benefit in removing FeR. Moreover, we demonstrate that for synthetic OC–FeR samples dominated by ferrihydrite, freeze-drying samples can significantly reduce OC–FeR extractability; this appears to be less of an issue for natural marine sediments where natural ageing mechanisms may mimic the freeze-drying process for more stable Fe phases. While our study is not an all-inclusive method comparison and is not aimed at delivering the “perfect” extraction setup, our findings provide a collected summary of critical factors which influence the efficiency of the CBD extraction for OC–FeR. As such, we provide a platform from which OC–FeR values obtained under different methods can be interpreted and future studies of sediment carbon cycling can build upon

Publishing and sharing multi-dimensional image data with OMERO

Imaging data are used in the life and biomedical sciences to measure the molecular and structural composition and dynamics of cells, tissues, and organisms. Datasets range in size from megabytes to terabytes and usually contain a combination of binary pixel data and metadata that describe the acquisition process and any derived results. The OMERO image data management platform allows users to securely share image datasets according to specific permissions levels: data can be held privately, shared with a set of colleagues, or made available via a public URL. Users control access by assigning data to specific Groups with defined membership and access rights. OMERO’s Permission system supports simple data sharing in a lab, collaborative data analysis, and even teaching environments. OMERO software is open source and released by the OME Consortium at www.openmicroscopy.org

A topological Dirac insulator in a quantum spin Hall phase : Experimental observation of first strong topological insulator

When electrons are subject to a large external magnetic field, the conventional charge quantum Hall effect \cite{Klitzing,Tsui} dictates that an electronic excitation gap is generated in the sample bulk, but metallic conduction is permitted at the boundary. Recent theoretical models suggest that certain bulk insulators with large spin-orbit interactions may also naturally support conducting topological boundary states in the extreme quantum limit, which opens up the possibility for studying unusual quantum Hall-like phenomena in zero external magnetic field. Bulk Bi$_{1-x}$Sb$_x$ single crystals are expected to be prime candidates for one such unusual Hall phase of matter known as the topological insulator. The hallmark of a topological insulator is the existence of metallic surface states that are higher dimensional analogues of the edge states that characterize a spin Hall insulator. In addition to its interesting boundary states, the bulk of Bi$_{1-x}$Sb$_x$ is predicted to exhibit three-dimensional Dirac particles, another topic of heightened current interest. Here, using incident-photon-energy-modulated (IPEM-ARPES), we report the first direct observation of massive Dirac particles in the bulk of Bi$_{0.9}$Sb$_{0.1}$, locate the Kramers' points at the sample's boundary and provide a comprehensive mapping of the topological Dirac insulator's gapless surface modes. These findings taken together suggest that the observed surface state on the boundary of the bulk insulator is a realization of the much sought exotic "topological metal". They also suggest that this material has potential application in developing next-generation quantum computing devices.Comment: 16 pages, 3 Figures. Submitted to NATURE on 25th November(2007