Water Quality Deterioration of Machna River due to Sewage Disposal, Betul,Madhya Pradesh, India

In this study the Physico-chemical characteristics of Sewage waste water joining into Machna River at Betul were studied. The parameters pH, Total dissolved solids, Total suspended solids, Dissolved oxygen, BOD, COD, Nitrate, Chloride were assessed. The values of these parameters were found in excessive amounts as prescribed by World Health Organisation (WHO), which indicate towards the deterioration of water quality of water body after the joining of inlets into the river. The study emphasizes on the detrimental impact caused by the sewage water on Machna River. Key words: Water pollution, pH, Dissolved oxygen, Alkalinity, Hardnes

Paper-based sensors for rapid detection of virulence factor produced by Pseudomonas aeruginosa

Pyocyanin is a toxin produced by Pseudomonas aeruginosa. Here we describe a novel paper-based electrochemical sensor for pyocyanin detection, manufactured with a simple and inexpensive approach based on electrode printing on paper. The resulting sensors constitute an effective electrochemical method to quantify pyocyanin in bacterial cultures without the conventional time consuming pretreatment of the samples. The electrochemical properties of the paper-based sensors were evaluated by ferri/ferrocyanide as a redox mediator, and showed reliable sensing performance. The paper-based sensors readily allow for the determination of pyocyanin in bacterial cultures with high reproducibility, achieving a limit of detection of 95 nM and a sensitivity of 4.30 μA/μM in standard culture media. Compared to the similar commercial ceramic based sensors, it is a 2.3-fold enhanced performance. The simple in-house fabrication of sensors for pyocyanin quantification allows researchers to understand in vitro adaptation of P. aeruginosa infections via rapid screenings of bacterial cultures that otherwise are expensive and time-consuming

Feature-by-Feature – Evaluating De Novo Sequence Assembly

The whole-genome sequence assembly (WGSA) problem is among one of the most studied problems in computational biology. Despite the availability of a plethora of tools (i.e., assemblers), all claiming to have solved the WGSA problem, little has been done to systematically compare their accuracy and power. Traditional methods rely on standard metrics and read simulation: while on the one hand, metrics like N50 and number of contigs focus only on size without proportionately emphasizing the information about the correctness of the assembly, comparisons performed on simulated dataset, on the other hand, can be highly biased by the non-realistic assumptions in the underlying read generator. Recently the Feature Response Curve (FRC) method was proposed to assess the overall assembly quality and correctness: FRC transparently captures the trade-offs between contigs' quality against their sizes. Nevertheless, the relationship among the different features and their relative importance remains unknown. In particular, FRC cannot account for the correlation among the different features. We analyzed the correlation among different features in order to better describe their relationships and their importance in gauging assembly quality and correctness. In particular, using multivariate techniques like principal and independent component analysis we were able to estimate the “excess-dimensionality” of the feature space. Moreover, principal component analysis allowed us to show how poorly the acclaimed N50 metric describes the assembly quality. Applying independent component analysis we identified a subset of features that better describe the assemblers performances. We demonstrated that by focusing on a reduced set of highly informative features we can use the FRC curve to better describe and compare the performances of different assemblers. Moreover, as a by-product of our analysis, we discovered how often evaluation based on simulated data, obtained with state of the art simulators, lead to not-so-realistic results

Azimuthal anisotropy in Au+Au collisions at sqrtsNN = 200 GeV

The results from the STAR Collaboration on directed flow (v_1), elliptic flow (v_2), and the fourth harmonic (v_4) in the anisotropic azimuthal distribution of particles from Au+Au collisions at sqrtsNN = 200 GeV are summarized and compared with results from other experiments and theoretical models. Results for identified particles are presented and fit with a Blast Wave model. Different anisotropic flow analysis methods are compared and nonflow effects are extracted from the data. For v_2, scaling with the number of constituent quarks and parton coalescence is discussed. For v_4, scaling with v_2^2 and quark coalescence is discussed.Comment: 26 pages. As accepted by Phys. Rev. C. Text rearranged, figures modified, but data the same. However, in Fig. 35 the hydro calculations are corrected in this version. The data tables are available at http://www.star.bnl.gov/central/publications/ by searching for "flow" and then this pape

Prevalence, genetic diversity and antiretroviral drugs resistance-associated mutations among untreated HIV-1-infected pregnant women in Gabon, central Africa

BACKGROUND: In Africa, the wide genetic diversity of HIV has resulted in emergence of new strains, rapid spread of this virus in sub-Saharan populations and therefore spread of the HIV epidemic throughout the continent. METHODS: To determine the prevalence of antibodies to HIV among a high-risk population in Gabon, 1098 and 2916 samples were collected from pregnant women in 2005 and 2008, respectively. HIV genotypes were evaluated in 107 HIV-1-positive samples to determine the circulating subtypes of strains and their resistance to antiretroviral drugs (ARVs). RESULTS: The seroprevalences were 6.3% in 2005 and 6.0% in 2008. The main subtype was recombinant CRF02_AG (46.7%), followed by the subtypes A (19.6%), G (10.3%), F (4.7%), H (1.9%) and D (0.9%) and the complex recombinants CRF06_cpx (1.9%) and CRF11_cpx (1.9%); 12.1% of subtypes could not be characterized. Analysis of ARVs resistance to the protease and reverse transcriptase coding regions showed mutations associated with extensive subtype polymorphism. In the present study, the HIV strains showed reduced susceptibility to ARVs (2.8%), particularly to protease inhibitors (1.9%) and nucleoside reverse transcriptase inhibitors (0.9%). CONCLUSIONS: The evolving genetic diversity of HIV calls for continuous monitoring of its molecular epidemiology in Gabon and in other central African countries

Azimuthal anisotropy and correlations at large transverse momenta in p+pp+p and Au+Au collisions at sNN\sqrt{s_{_{NN}}}= 200 GeV

Results on high transverse momentum charged particle emission with respect to the reaction plane are presented for Au+Au collisions at $\sqrt{s_{_{NN}}}$= 200 GeV. Two- and four-particle correlations results are presented as well as a comparison of azimuthal correlations in Au+Au collisions to those in $p+p$ at the same energy. Elliptic anisotropy, $v_2$, is found to reach its maximum at $p_t \sim 3$ GeV/c, then decrease slowly and remain significant up to $p_t\approx 7$ -- 10 GeV/c. Stronger suppression is found in the back-to-back high-$p_t$ particle correlations for particles emitted out-of-plane compared to those emitted in-plane. The centrality dependence of $v_2$ at intermediate $p_t$ is compared to simple models based on jet quenching.Comment: 4 figures. Published version as PRL 93, 252301 (2004

Rapidity and Centrality Dependence of Proton and Anti-proton Production from Au+Au Collisions at sqrt(sNN) = 130GeV

We report on the rapidity and centrality dependence of proton and anti-proton transverse mass distributions from Au+Au collisions at sqrt(sNN) = 130GeV as measured by the STAR experiment at RHIC. Our results are from the rapidity and transverse momentum range of |y|<0.5 and 0.35 <p_t<1.00GeV/c. For both protons and anti-protons, transverse mass distributions become more convex from peripheral to central collisions demonstrating characteristics of collective expansion. The measured rapidity distributions and the mean transverse momenta versus rapidity are flat within |y|<0.5. Comparisons of our data with results from model calculations indicate that in order to obtain a consistent picture of the proton(anti-proton) yields and transverse mass distributions the possibility of pre-hadronic collective expansion may have to be taken into account.Comment: 4 pages, 3 figures, 1 table, submitted to PR

Effective Rheology of Bubbles Moving in a Capillary Tube

We calculate the average volumetric flux versus pressure drop of bubbles moving in a single capillary tube with varying diameter, finding a square-root relation from mapping the flow equations onto that of a driven overdamped pendulum. The calculation is based on a derivation of the equation of motion of a bubble train from considering the capillary forces and the entropy production associated with the viscous flow. We also calculate the configurational probability of the positions of the bubbles.Comment: 4 pages, 1 figur

Deciphering the Catalytic Machinery in 30S Ribosome Assembly GTPase YqeH

YqeH, a circularly permuted GTPase (cpGTPase), which is conserved across bacteria and eukaryotes including humans is important for the maturation of small (30S) ribosomal subunit in Bacillus subtilis. Recently, we have shown that it binds 30S in a GTP/GDP dependent fashion. However, the catalytic machinery employed to hydrolyze GTP is not recognized for any of the cpGTPases, including YqeH. This is because they possess a hydrophobic substitution in place of a catalytic glutamine (present in Ras-like GTPases). Such GTPases were categorized as HAS-GTPases and were proposed to follow a catalytic mechanism, different from the Ras-like proteins.MnmE, another HAS-GTPase, but not circularly permuted, utilizes a potassium ion and water mediated interactions to drive GTP hydrolysis. Though the G-domain of MnmE and YqeH share only approximately 25% sequence identity, the conservation of characteristic sequence motifs between them prompted us to probe GTP hydrolysis machinery in YqeH, by employing homology modeling in conjunction with biochemical experiments. Here, we show that YqeH too, uses a potassium ion to drive GTP hydrolysis and stabilize the transition state. However, unlike MnmE, it does not dimerize in the transition state, suggesting alternative ways to stabilize switches I and II. Furthermore, we identify a potential catalytic residue in Asp-57, whose recognition, in the absence of structural information, was non-trivial due to the circular permutation in YqeH. Interestingly, when compared with MnmE, helix alpha2 that presents Asp-57 is relocated towards the N-terminus in YqeH. An analysis of the YqeH homology model, suggests that despite such relocation, Asp-57 may facilitate water mediated catalysis, similarly as the catalytic Glu-282 of MnmE. Indeed, an abolished catalysis by D57I mutant supports this inference.An uncommon means to achieve GTP hydrolysis utilizing a K(+) ion has so far been demonstrated only for MnmE. Here, we show that YqeH also utilizes a similar mechanism. While the catalytic machinery is similar in both, mechanistic differences may arise based on the way they are deployed. It appears that K(+) driven mechanism emerges as an alternative theme to stabilize the transition state and hydrolyze GTP in a subset of GTPases, such as the HAS-GTPases

Performance of CMS muon reconstruction in pp collision events at sqrt(s) = 7 TeV

The performance of muon reconstruction, identification, and triggering in CMS has been studied using 40 inverse picobarns of data collected in pp collisions at sqrt(s) = 7 TeV at the LHC in 2010. A few benchmark sets of selection criteria covering a wide range of physics analysis needs have been examined. For all considered selections, the efficiency to reconstruct and identify a muon with a transverse momentum pT larger than a few GeV is above 95% over the whole region of pseudorapidity covered by the CMS muon system, abs(eta) < 2.4, while the probability to misidentify a hadron as a muon is well below 1%. The efficiency to trigger on single muons with pT above a few GeV is higher than 90% over the full eta range, and typically substantially better. The overall momentum scale is measured to a precision of 0.2% with muons from Z decays. The transverse momentum resolution varies from 1% to 6% depending on pseudorapidity for muons with pT below 100 GeV and, using cosmic rays, it is shown to be better than 10% in the central region up to pT = 1 TeV. Observed distributions of all quantities are well reproduced by the Monte Carlo simulation.Comment: Replaced with published version. Added journal reference and DO