Maximum performance of piezoelectric energy harvesters when coupled to interface circuits

This paper presents a complete optimization of a piezoelectric vibration energy harvesting system, including a piezoelectric transducer, a power conditioning circuit with full semiconductor device models, a battery and passive components. To the authors awareness, this is the first time and all of these elements have been integrated into one optimization. The optimization is done within a framework, which models the combined mechanical and electrical elements of a complete piezoelectric vibration energy harvesting system. To realize the optimization, an optimal electrical damping is achieved using a single-supply pre-biasing circuit with a buck converter to charge the battery. The model is implemented in MATLAB and verified in SPICE. The results of the full system model are used to find the mechanical and electrical system parameters required to maximize the power output. The model, therefore, yields the upper bound of the output power and the system effectiveness of complete piezoelectric energy harvesting systems and, hence, provides both a benchmark for assessing the effectiveness of existing harvesters and a framework to design the optimized harvesters. It is also shown that the increased acceleration does not always result in increased power generation as a larger damping force is required, forcing a geometry change of the harvester to avoid exceeding the piezoelectric breakdown voltage. Similarly, increasing available volume may not result in the increased power generation because of the difficulty of resonating the beam at certain frequencies whilst utilizing the entire volume. A maximum system effectiveness of 48% is shown to be achievable at 100 Hz for a 3.38-cm3 generator

Reference curves for a fitness battery developed for children ages 5-12 years in England

Purpose: Reference curves have already been created for a variety of different physical testing batteries across a number of countries. Due to results differing between countries for the same sex and age, it is important that reference curves are created specific for each country. Therefore, the aim of this study was to provide reference curves for five different fitness tests that assess the core components of health related fitness within children in England. Method: Following institutional ethics approval, parental informed consent and child assent was obtained for a total of 39,199 children aged between 5 and 12 years completed tests for explosive power, agility, hand eye coordination, lower body strength and upper body strength. To calculate reference values Generalised Additive Models for Location, Scale and Shape (GAMLSS) were used. Results: Reference curves and centiles show differences in performance levels of the fitness tests between sex and age groups. These reference curves and centiles provide age and sex comparisons to enable progress monitoring of children's physical fitness competence within England and comparisons to other countries. Conclusion: Girls are outperformed from a young age group and both upper and lower body strength decreases are seen at ages nine and ten. In physical activity and health related fitness interventions, both girls and boys in Key stage two should be targeted to maintain progression and lessen the gender divide

Modelling size-fractionated primary production in the Atlantic Ocean from remote sensing

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this recordMarine primary production influences the transfer of carbon dioxide between the ocean and atmosphere, and the availability of energy for the pelagic food web. Both the rate and the fate of organic carbon from primary production are dependent on phytoplankton size. A key aim of the Atlantic Meridional Transect (AMT) programme has been to quantify biological carbon cycling in the Atlantic Ocean and measurements of total primary production have been routinely made on AMT cruises, as well as additional measurements of size-fractionated primary production on some cruises. Measurements of total primary production collected on the AMT have been used to evaluate remote-sensing techniques capable of producing basin-scale estimates of primary production. Though models exist to estimate size-fractionated primary production from satellite data, these have not been well validated in the Atlantic Ocean, and have been parameterised using measurements of phytoplankton pigments rather than direct measurements of phytoplankton size structure. Here, we re-tune a remote-sensing primary production model to estimate production in three size fractions of phytoplankton (10 μm) in the Atlantic Ocean, using measurements of size-fractionated chlorophyll and size-fractionated photosynthesis-irradiance experiments conducted on AMT 22 and 23 using sequential filtration-based methods. The performance of the remote-sensing technique was evaluated using: (i) independent estimates of size-fractionated primary production collected on a number of AMT cruises using 14C on-deck incubation experiments and (ii) Monte Carlo simulations. Considering uncertainty in the satellite inputs and model parameters, we estimate an average model error of between 0.27 and 0.63 for log10-transformed size-fractionated production, with lower errors for the small size class (10 μm), and errors generally higher in oligotrophic waters. Application to satellite data in 2007 suggests the contribution of cells 2 μm to total primary production is approximately equal in the Atlantic Ocean.UK National Centre for Earth ObservationNatural Environment Research Council (NERC)Plymouth Marine Laborator

Fake supersymmetry versus Hamilton-Jacobi

We explain when the first-order Hamilton-Jacobi equations for black holes (and domain walls) in (gauged) supergravity, reduce to the usual first-order equations derived from a fake superpotential. This turns out to be equivalent to the vanishing of a newly found constant of motion and we illustrate this with various examples. We show that fake supersymmetry is a necessary condition for having physically sensible extremal black hole solutions. We furthermore observe that small black holes become scaling solutions near the horizon. When combined with fake supersymmetry, this leads to a precise extension of the attractor mechanism to small black holes: The attractor solution is such that the scalars move on specific curves, determined by the black hole charges, that are purely geodesic, although there is a non-zero potential.Comment: 20 pages, v2: Typos corrected, references adde

Production of Androgens by Microbial Transformation of Progesterone in Vitro: A Model for Androgen Production in Rivers Receiving Paper Mill Effluent

We have previously documented the presence of progesterone and androstenedione in the water column and bottom sediments of the Fenholloway River, Taylor County, Florida. This river receives paper mill effluent and contains masculinized female mosquitofish. We hypothesized that plant sterols (e.g., β-sitosterol) derived from the pulping of pine trees are transformed by bacteria into progesterone and subsequently into 17α-hydroxyprogesterone, androstenedione, and other androgens. In this study, we demonstrate that these same androgens can be produced in vitro from the bacterium Mycobacterium smegmatis. In a second part to this study, we reextracted and reanalyzed the sediment from the Fenholloway River and verified the presence of androstadienedione, a Δ1 steroid with androgen activity

Are we underestimating microplastic abundance in the marine environment? A comparison of microplastic capture with nets of different mesh-size

Microplastic debris is ubiquitous and yet sampling, classifying and enumerating this prolific pollutant in marine waters has proven challenging. Typically, waterborne microplastic sampling is undertaken using nets with a 333 μm mesh, which cannot account for smaller debris. In this study, we provide an estimate of the extent to which microplastic concentrations are underestimated with traditional sampling. Our efforts focus on coastal waters, where microplastics are predicted to have the greatest influence on marine life, on both sides of the North Atlantic Ocean. Microplastic debris was collected via surface trawls using 100, 333 and 500 μm nets. Our findings show that sampling using nets with a 100 μm mesh resulted in the collection of 2.5-fold and 10-fold greater microplastic concentrations compared with using 333 and 500 μm meshes respectively (P < 0.01). Based on the relationship between microplastic concentrations identified and extrapolation of our data using a power law, we estimate that microplastic concentrations could exceed 3700 microplastics m−3 if a net with a 1 μm mesh size is used. We further identified that use of finer nets resulted in the collection of significantly thinner and shorter microplastic fibres (P < 0.05). These results elucidate that estimates of marine microplastic concentrations could currently be underestimated

A Golf Programme for People with Severe and Enduring Mental Health Problems

This article reports a pioneering golf programme for people with severe and enduring mental health problems. Following a discussion of the problems and possibilities of golf as a form of physical activity for this group, we outline the structure, organisation, and ethos of the golf programme. Through an analysis of qualitative case study data collected during the programme, we discuss the response to the programme from service users and mental health professionals. We conclude by highlighting aspects of the programme which were critical to its success and offering suggestions for further initiatives in this area

Anarchy in the UK: Detailed genetic analysis of worker reproduction in a naturally occurring British anarchistic honeybee, Apis mellifera, colony using DNA microsatellites

Anarchistic behaviour is a very rare phenotype of honeybee colonies. In an anarchistic colony, many workers’ sons are reared in the presence of the queen. Anarchy has previously been described in only two Australian colonies. Here we report on a first detailed genetic analysis of a British anarchistic colony. Male pupae were present in great abundance above the queen excluder, which was clearly indicative of extensive worker reproduction and is the hallmark of anarchy. Seventeen microsatellite loci were used to analyse these male pupae, allowing us to address whether all the males were indeed workers’ sons, and how many worker patrilines and individual workers produced them. In the sample, 95 of 96 of the males were definitely workers’ sons. Given that ≈ 1% of workers’ sons were genetically indistinguishable from queen’s sons, this suggests that workers do not move any queen-laid eggs between the part of the colony where the queen is present to the area above the queen excluder which the queen cannot enter. The colony had 16 patrilines, with an effective number of patrilines of 9.85. The 75 males that could be assigned with certainty to a patriline came from 7 patrilines, with an effective number of 4.21. They were the offspring of at least 19 workers. This is in contrast to the two previously studied Australian naturally occurring anarchist colonies, in which most of the workers’ sons were offspring of one patriline. The high number of patrilines producing males leads to a low mean relatedness between laying workers and males of the colony. We discuss the importance of studying such colonies in the understanding of worker policing and its evolution

Removing exogenous information using pedigree data

Management of certain populations requires the preservation of its pure genetic background. When, for different reasons, undesired alleles are introduced, the original genetic conformation must be recovered. The present study tested, through computer simulations, the power of recovery (the ability for removing the foreign information) from genealogical data. Simulated scenarios comprised different numbers of exogenous individuals taking partofthe founder population anddifferent numbers of unmanaged generations before the removal program started. Strategies were based on variables arising from classical pedigree analyses such as founders? contribution and partial coancestry. The ef?ciency of the different strategies was measured as the proportion of native genetic information remaining in the population. Consequences on the inbreeding and coancestry levels of the population were also evaluated. Minimisation of the exogenous founders? contributions was the most powerful method, removing the largest amount of genetic information in just one generation.However, as a side effect, it led to the highest values of inbreeding. Scenarios with a large amount of initial exogenous alleles (i.e. high percentage of non native founders), or many generations of mixing became very dif?cult to recover, pointing out the importance of being careful about introgression events in populatio