23 research outputs found
Stomatin-like Protein 2 Links Mitochondria to T-Cell Receptor Signalosomes at the Immunological Synapse and Enhances T-Cell Activation
T cell activation through the antigen receptor (TCR) requires sustained signalling from microclusters in the peripheral region of the immunological synapse (IS). The bioenergetics of such prolonged signaling have been linked to the redistribution of mitochondria to the IS. Here, we report that stomatin-like protein-2 (SLP-2) plays an important role in this process by bridging polarized mitochondria to these signaling TCR microclusters or signalosomes in the IS in a polymerized actin-dependent manner. In this way, SLP-2 helps to sustain TCR-dependent signalling and enhances T cell activation
Characterization of Antiallodynic Actions of ALE-0540, a Novel Nerve Growth Factor Receptor Antagonist, in the Rat1
There is growing evidence that nerve growth factor (NGF) may
function as a mediator of persistent pain states. We have identified
a novel nonpeptidic molecule, ALE-0540, that inhibits the
binding of NGF to tyrosine kinase (Trk) A or both p75 and TrkA
(IC50 5.88 6 1.87 mM, 3.72 6 1.3 mM, respectively), as well as
signal transduction and biological responses mediated by TrkA
receptors. ALE-0540 was tested in models of neuropathic pain
and thermally-induced inflammatory pain, using two routes of
administration, a systemic i.p. and a spinal intrathecal (i.th.)
route. Morphine was also tested for comparison in the antiallodynia
model using mechanical stimuli. We show that either
i.p. or i.th. administration of ALE-0540 in rats produced antiallodynia
in the L5/L6 ligation model of neuropathic pain. The
calculated A50 values (and 95% confidence intervals) for ALE-
0540 administered i.p. and i.th. were 38 (17.5– 83) mg/kg and
34.6 (17.3– 69.4) mg, respectively. ALE-0540 given i.th., at
doses of 30 and 60 mg, also blocked tactile allodynia in the
thermal sensitization model. Although morphine displayed
greater potency [A50 value of 7.1 (5.6–8.8) mg/kg] than ALE-
0540 in anti-allodynic effect when given i.p. to L5/L6-ligated
rats, it was not active when administered i.th. These data
suggest that a blockade of NGF bioactivity using a NGF receptor
antagonist is capable of blocking neuropathic and inflammatory
pain and further support the hypothesis that NGF is
involved in signaling pathways associated with these pain
states. ALE-0540 represents a nonpeptidic small molecule
which can be used to examine mechanisms leading to the
development of agents for the treatment of pain
Bond Behavior of MMFX (ASTM A 1035) Reinforcing Steel
This summary report provides a brief description of the research program and presents the research findings and recommendations. Detailed discussions of the research are documented in several publications prepared by different authors at the three institutions. These publications are listed in the appendix and can be obtained without charge from the indicated Web sites
Bond Characteristics of ASTM A1035 Steel Reinforcing Bars
The results of a coordinated research program on the bond characteristics of the high-strength steel reinforcing bars that conform to ASTM A1035 are presented. Concrete with nominal strengths of 5000 and 8000 psi (35 and 55 MPa) were used. Sixtynine large-scale beam-splice specimens were tested. Maximum bar stresses are compared with predictions obtained using the bond equations in the ACI 318-05 code provisions and those proposed by ACI Committee 408. Maximum stress levels of 120, 110, and 96 ksi (830, 760, and 660 MPa) were developed in No. 5, No. 8, and No. 11 (No. 16, No. 25, and No. 36) bars, respectively, not confined by transverse reinforcement. Providing confinement for No. 8 and No. 11 (No. 25 and No. 36) spliced bars using transverse reinforcement allowed stresses of up to 150 ksi (1035 MPa) to be developed. The ACI Committee 408 equation provides a reasonable estimate of the strength for both unconfined and confined splices using a strength reduction factor (f-factor) of 0.82 and design parameters (cover, spacing, and concrete strengths) comparable to those used in this test program. The design equations in ACI 318 are less conservative, with a large percentage of the developed/calculated strength ratios below 1.0, and should not be used for development and splice design with high-strength reinforcing steel in their present form
Design of experiments to study the impact of process parameters on droplet size and development of non-invasive imaging techniques in tablet coating
Atomisation of an aqueous solution for tablet film coating is a complex process with multiple factors determining droplet formation and properties. The importance of droplet size for an efficient process and a high quality final product has been noted in the literature, with smaller droplets reported to produce smoother, more homogenous coatings whilst simultaneously avoiding the risk of damage through over-wetting of the tablet core. In this work the effect of droplet size on tablet film coat characteristics was investigated using X-ray microcomputed tomography (XμCT) and confocal laser scanning microscopy (CLSM). A quality by design approach utilising design of experiments (DOE) was used to optimise the conditions necessary for production of droplets at a small (20 μm) and large (70 μm) droplet size. Droplet size distribution was measured using real-time laser diffraction and the volume median diameter taken as a response. DOE yielded information on the relationship three critical process parameters: pump rate, atomisation pressure and coating-polymer concentration, had upon droplet size. The model generated was robust, scoring highly for model fit (R2 = 0.977), predictability (Q2 = 0.837), validity and reproducibility. Modelling confirmed that all parameters had either a linear or quadratic effect on droplet size and revealed an interaction between pump rate and atomisation pressure. Fluidised bed coating of tablet cores was performed with either small or large droplets followed by CLSM and XμCT imaging. Addition of commonly used contrast materials to the coating solution improved visualisation of the coating by XμCT, showing the coat as a discrete section of the overall tablet. Imaging provided qualitative and quantitative evidence revealing that smaller droplets formed thinner, more uniform and less porous film coats
The impact of immediate breast reconstruction on the time to delivery of adjuvant therapy: the iBRA-2 study
Background:
Immediate breast reconstruction (IBR) is routinely offered to improve quality-of-life for women requiring mastectomy, but there are concerns that more complex surgery may delay adjuvant oncological treatments and compromise long-term outcomes. High-quality evidence is lacking. The iBRA-2 study aimed to investigate the impact of IBR on time to adjuvant therapy.
Methods:
Consecutive women undergoing mastectomy ± IBR for breast cancer July–December, 2016 were included. Patient demographics, operative, oncological and complication data were collected. Time from last definitive cancer surgery to first adjuvant treatment for patients undergoing mastectomy ± IBR were compared and risk factors associated with delays explored.
Results:
A total of 2540 patients were recruited from 76 centres; 1008 (39.7%) underwent IBR (implant-only [n = 675, 26.6%]; pedicled flaps [n = 105,4.1%] and free-flaps [n = 228, 8.9%]). Complications requiring re-admission or re-operation were significantly more common in patients undergoing IBR than those receiving mastectomy. Adjuvant chemotherapy or radiotherapy was required by 1235 (48.6%) patients. No clinically significant differences were seen in time to adjuvant therapy between patient groups but major complications irrespective of surgery received were significantly associated with treatment delays.
Conclusions:
IBR does not result in clinically significant delays to adjuvant therapy, but post-operative complications are associated with treatment delays. Strategies to minimise complications, including careful patient selection, are required to improve outcomes for patients