Effects of bowel preparation on intestinal bacterial associated urine and faecal metabolites and the associated faecal microbiome

Background Urinary and faecal metabolic profiling have been extensively studied in gastrointestinal diseases as potential diagnostic markers, and to enhance our understanding of the intestinal microbiome in the pathogenesis these conditions. The impact of bowel cleansing on the microbiome has been investigated in several studies, but limited to just one study on the faecal metabolome. Aim To compare the effects of bowel cleansing on the composition of the faecal microbiome, and the urine and faecal metabolome. Methods Urine and faecal samples were obtained from eleven patients undergoing colonoscopy at baseline, and then at day 3 and week 6 after colonoscopy. 16S rRNA gene sequencing was used to analyse changes in the microbiome, and metabonomic analysis was performed using proton nuclear magnetic resonance (1H NMR) spectroscopy. Results Microbiomic analysis demonstrated a reduction in alpha diversity (Shannon index) between samples taken at baseline and three days following bowel cleansing (p = 0.002), and there was no significant difference between samples at baseline and six weeks post colonoscopy. Targeted and non-targeted analysis of urinary and faecal bacterial associated metabolites showed no significant impact following bowel cleansing. Conclusions Bowel cleansing causes a temporary disturbance in bacterial alpha diversity measured in faeces, but no significant changes in the faecal and urine metabolic profiles, suggesting that overall the faecal microbiome and its associated metabolome is resistant to the effects of an induced osmotic diarrhoea

Social feasibility assessments in conservation translocations

This is the final version. Available on open access from Cell Press via the DOI in this recordImproving the effectiveness of conservation translocations could contribute to reversing global biodiversity loss. Although evaluations of ecological factors affecting translocation outcomes are commonplace, consideration of human social factors remains rare, hindering improvements to this conservation practice. We analysed 550 translocation case studies to explore the inclusion of social factors in project feasibility assessments. Reviewed projects often failed to assess social feasibility, and assessments, where attempted, tended to be narrow in scope. Consequently, challenges such as proactively addressing conflict often remained unaddressed. Insufficient knowledge sharing and prioritisation of ecological feasibility, to the detriment of social feasibility, remain barriers to effective planning. Successful outcomes of translocations are linked to early assessment of social feasibility and to the establishment of long-term commitments between people, places, and partners.Vincent Wildlife TrustDurrell Wildlife Conservation TrustUniversity of Exete

Sommerfeld Enhancement from Multiple Mediators

We study the Sommerfeld enhancement experienced by a scattering object that couples to a tower of mediators. This can occur in, e.g., models of secluded dark matter when the mediator scale is generated naturally by hidden-sector confinement. Specializing to the case of a confining CFT, we show that off-resonant values of the enhancement can be increased by ~ 20% for cases of interest when (i) the (strongly-coupled) CFT admits a weakly-coupled dual description and (ii) the conformal symmetry holds up to the Planck scale. Larger enhancements are possible for lower UV scales due to an increase in the coupling strength of the tower.Comment: 17p, 2 figures; v2 JHEP version (inconsequential typo fixed, references added

Secluded Dark Matter Coupled to a Hidden CFT

Models of secluded dark matter offer a variant on the standard WIMP picture and can modify our expectations for hidden sector phenomenology and detection. In this work we extend a minimal model of secluded dark matter, comprised of a U(1)'-charged dark matter candidate, to include a confining hidden-sector CFT. This provides a technically natural explanation for the hierarchically small mediator-scale, with hidden-sector confinement generating m_{gamma'}>0. Furthermore, the thermal history of the universe can differ markedly from the WIMP picture due to (i) new annihilation channels, (ii) a (potentially) large number of hidden-sector degrees of freedom, and (iii) a hidden-sector phase transition at temperatures T << M_{dm} after freeze out. The mediator allows both the dark matter and the Standard Model to communicate with the CFT, thus modifying the low-energy phenomenology and cosmic-ray signals from the secluded sector.Comment: ~50p, 8 figs; v2 JHEP versio

A randomised controlled study shows supplementation of overweight and obese adults with lactobacilli and bifidobacteria reduces bodyweight and improves well-being

In an exploratory, block-randomised, parallel, double-blind, single-centre, placebo-controlled superiority study (ISRCTN12562026, funded by Cultech Ltd), 220 Bulgarian participants (30 to 65 years old) with BMI 25–34.9 kg/m2 received Lab4P probiotic (50 billion/day) or a matched placebo for 6 months. Participants maintained their normal diet and lifestyle. Primary outcomes were changes in body weight, BMI, waist circumference (WC), waist-to-height ratio (WtHR), blood pressure and plasma lipids. Secondary outcomes were changes in plasma C-reactive protein (CRP), the diversity of the faecal microbiota, quality of life (QoL) assessments and the incidence of upper respiratory tract infection (URTI). Significant between group decreases in body weight (1.3 kg, p < 0.0001), BMI (0.045 kg/m2, p < 0.0001), WC (0.94 cm, p < 0.0001) and WtHR (0.006, p < 0.0001) were in favour of the probiotic. Stratification identified greater body weight reductions in overweight subjects (1.88%, p < 0.0001) and in females (1.62%, p = 0.0005). Greatest weight losses were among probiotic hypercholesterolaemic participants (−2.5%, p < 0.0001) alongside a significant between group reduction in small dense LDL-cholesterol (0.2 mmol/L, p = 0.0241). Improvements in QoL and the incidence rate ratio of URTI (0.60, p < 0.0001) were recorded for the probiotic group. No adverse events were recorded. Six months supplementation with Lab4P probiotic resulted in significant weight reduction and improved small dense low-density lipoprotein-cholesterol (sdLDL-C) profiles, QoL and URTI incidence outcomes in overweight/obese individuals

Efficacy and safety of enzyme replacement therapy with BMN 110 (elosulfase alfa) for Morquio A syndrome (mucopolysaccharidosis IVA): a phase 3 randomised placebo-controlled study.

ObjectiveTo assess the efficacy and safety of enzyme replacement therapy (ERT) with BMN 110 (elosulfase alfa) in patients with Morquio A syndrome (mucopolysaccharidosis IVA).MethodsPatients with Morquio A aged ≥5&nbsp;years (N = 176) were randomised (1:1:1) to receive elosulfase alfa 2.0&nbsp;mg/kg/every other week (qow), elosulfase alfa 2.0&nbsp;mg/kg/week (weekly) or placebo for 24&nbsp;weeks in this phase 3, double-blind, randomised study. The primary efficacy measure was 6-min walk test (6MWT) distance. Secondary efficacy measures were 3-min stair climb test (3MSCT) followed by change in urine keratan sulfate (KS). Various exploratory measures included respiratory function tests. Patient safety was also evaluated.ResultsAt week 24, the estimated mean effect on the 6MWT versus placebo was 22.5 m (95&nbsp;% CI 4.0, 40.9; P = 0.017) for weekly and 0.5 m (95&nbsp;% CI -17.8, 18.9; P = 0.954) for qow. The estimated mean effect on 3MSCT was 1.1 stairs/min (95&nbsp;% CI -2.1, 4.4; P = 0.494) for weekly and -0.5 stairs/min (95&nbsp;% CI -3.7, 2.8; P = 0.778) for qow. Normalised urine KS was reduced at 24&nbsp;weeks in both regimens. In the weekly dose group, 22.4&nbsp;% of patients had adverse events leading to an infusion interruption/discontinuation requiring medical intervention (only 1.3&nbsp;% of all infusions in this group) over 6&nbsp;months. No adverse events led to permanent treatment discontinuation.ConclusionsElosulfase alfa improved endurance as measured by the 6MWT in the weekly but not qow dose group, did not improve endurance on the 3MSCT, reduced urine KS, and had an acceptable safety profile

Construction and Cost Analysis of BladeBridges Made from Decommissioned FRP Wind Turbine Blades

This paper describes repurposing projects using decommissioned wind turbine blades in bridges conducted under a multinational research project entitled “Re-Wind”. Repurposing is defined by the Re-Wind Network as the re-engineering, redesigning, and remanufacturing of a wind blade that has reached the end of its life on a turbine and taken out of service and then reused as a load-bearing structural element in a new structure (e.g., bridge, transmission pole, sound barrier, seawall, shelter). The issue of end-of-life of wind turbine blades is becoming a significant sustainability concern for wind turbine manufacturers, many of whom have committed to the 2030 or 2040 sustainability goals that include zero-waste for their products. Repurposing is the most sustainable end-of-life solution for wind turbine blades from an environmental, economic, and social perspective. The Network has designed and constructed two full-size pedestrian/cycle bridges—one on a greenway in Cork, Ireland and the other in a quarry in Draperstown, Northern Ireland, UK. The paper describes the design, testing, and construction of the two bridges and provides cost data for the bridges. Two additional bridges that are currently being designed for construction in Atlanta, GA, USA are also described. The paper also presents a step-by-step procedure for designing and building civil structures using decommissioned wind turbine blades. The steps are: project planning and funding, blade sourcing, blade geometric characterization, material testing, structural testing, designing, cost estimating, and construction

Construction and Cost Analysis of BladeBridges Made from Decommissioned FRP Wind Turbine Blades

This paper describes repurposing projects using decommissioned wind turbine blades in bridges conducted under a multinational research project entitled “Re-Wind”. Repurposing is defined by the Re-Wind Network as the re-engineering, redesigning, and remanufacturing of a wind blade that has reached the end of its life on a turbine and taken out of service and then reused as a load-bearing structural element in a new structure (e.g., bridge, transmission pole, sound barrier, seawall, shelter). The issue of end-of-life of wind turbine blades is becoming a significant sustainability concern for wind turbine manufacturers, many of whom have committed to the 2030 or 2040 sustainability goals that include zero-waste for their products. Repurposing is the most sustainable end-of-life solution for wind turbine blades from an environmental, economic, and social perspective. The Network has designed and constructed two full-size pedestrian/cycle bridges—one on a greenway in Cork, Ireland and the other in a quarry in Draperstown, Northern Ireland, UK. The paper describes the design, testing, and construction of the two bridges and provides cost data for the bridges. Two additional bridges that are currently being designed for construction in Atlanta, GA, USA are also described. The paper also presents a step-by-step procedure for designing and building civil structures using decommissioned wind turbine blades. The steps are: project planning and funding, blade sourcing, blade geometric characterization, material testing, structural testing, designing, cost estimating, and construction

Complex circular subsidence structures in tephra deposited on large blocks of ice: Varða tuff cone, Öræfajökull, Iceland

Several broadly circular structures up to 16 m in diameter, into which higher strata have sagged and locally collapsed, are present in a tephra outcrop on southwest Öræfajökull, southern Iceland. The tephra was sourced in a nearby basaltic tuff cone at Varða. The structures have not previously been described in tuff cones, and they probably formed by the melting out of large buried blocks of ice emplaced during a preceding jökulhlaup that may have been triggered by a subglacial eruption within the Öræfajökull ice cap. They are named ice-melt subsidence structures, and they are analogous to kettle holes that are commonly found in proglacial sandurs and some lahars sourced in ice-clad volcanoes. The internal structure is better exposed in the Varða examples because of an absence of fluvial infilling and reworking, and erosion of the outcrop to reveal the deeper geometry. The ice-melt subsidence structures at Varða are a proxy for buried ice. They are the only known evidence for a subglacial eruption and associated jökulhlaup that created the ice blocks. The recognition of such structures elsewhere will be useful in reconstructing more complete regional volcanic histories as well as for identifying ice-proximal settings during palaeoenvironmental investigations

Simulations of extensional flow in microrheometric devices

We present a detailed numerical study of the flow of a Newtonian fluid through microrheometric devices featuring a sudden contraction–expansion. This flow configuration is typically used to generate extensional deformations and high strain rates. The excess pressure drop resulting from the converging and diverging flow is an important dynamic measure to quantify if the device is intended to be used as a microfluidic extensional rheometer. To explore this idea, we examine the effect of the contraction length, aspect ratio and Reynolds number on the flow kinematics and resulting pressure field. Analysis of the computed velocity and pressure fields show that, for typical experimental conditions used in microfluidic devices, the steady flow is highly three-dimensional with open spiraling vortical structures in the stagnant corner regions. The numerical simulations of the local kinematics and global pressure drop are in good agreement with experimental results. The device aspect ratio is shown to have a strong impact on the flow and consequently on the excess pressure drop, which is quantified in terms of the dimensionless Couette and Bagley correction factors. We suggest an approach for calculating the Bagley correction which may be especially appropriate for planar microchannels