Perspectives on pre-exposure prophylaxis for people who inject drugs in the context of an HIV outbreak: a qualitative study

Background: There is an ongoing HIV outbreak amongst people who inject drugs (PWID) in Glasgow, Scotland, and one response which has not yet been widely implemented is the provision of Pre-exposure prophylaxis (PrEP). PrEP is the use of HIV anti-retrovirals prior to HIV infection to provide a barrier to infection. This has been shown to be effective amongst various at-risk populations in preventing HIV spread. The present study aimed to explore views of PWID who might benefit from PrEP provision and Service Providers working with PWID to understand will to use PrEP and literacy of PrEP, contributing to the development of a PrEP service. Methods: A qualitative approach was taken, with semi structured interviews conducted in Glasgow at two third sector service sites. 11 Service Providers and 21 PWID participated in the study. Data was analysed thematically. Results: Participants, both PWID and Service Providers, were keen to engage with PrEP and perceived substantial potential benefits of PrEP for this population. Potential barriers to engagement were identified as a lack of health literacy, motivation, and self-ascribed risk, as well as the overwhelming unpredictability of substance use. Participants wanted PrEP to be provided within already existing structures, particularly community pharmacies, and for promotion and provision to involve peers. Conclusion: This sample reported willingness to engage with PrEP, and suggested there is a specific need amongst PWID for PrEP. However, PWID have specific lived experienced contexts and needs, and are burdened by social and economic marginalisation and inequality at every level. This contrasts them from other populations currently being provided with PrEP, and must be considered in the development of provision

DNA hypomethylation during MSC chondrogenesis occurs predominantly at enhancer regions

Regulation of transcription occurs in a cell type specific manner orchestrated by epigenetic mechanisms including DNA methylation. Methylation changes may also play a key role in lineage specification during stem cell differentiation. To further our understanding of epigenetic regulation in chondrocytes we characterised the DNA methylation changes during chondrogenesis of mesenchymal stem cells (MSCs) by Infinium 450 K methylation array. Significant DNA hypomethylation was identified during chondrogenic differentiation including changes at many key cartilage gene loci. Integration with chondrogenesis gene expression data revealed an enrichment of significant CpGs in upregulated genes, while characterisation of significant CpG loci indicated their predominant localisation to enhancer regions. Comparison with methylation profiles of other tissues, including healthy and diseased adult cartilage, identified chondrocyte-specific regions of hypomethylation and the overlap with differentially methylated CpGs in osteoarthritis. Taken together we have associated DNA methylation levels with the chondrocyte phenotype. The consequences of which has potential to improve cartilage generation for tissue engineering purposes and also to provide context for observed methylation changes in cartilage diseases such as osteoarthritis

Structures of smooth muscle myosin and heavy meromyosin in the folded, shutdown state

Remodelling of the contractile apparatus within smooth muscle cells is an essential process that allows effective contractile activity over a wide range of cell lengths. The thick filaments may be redistributed via depolymerisation into inactive myosin monomers that have been detected in vitro, in which the long tail has a folded conformation. The structure of this folded molecule has been controversial. Using negative stain electron microscopy of individual folded molecules from turkey gizzard we show they are more compact than previously described, with heads and the three segments of the folded tail closely packed. Smooth muscle heavy meromyosin (HMM), which lacks two-thirds of the tail, closely resembles the equivalent parts of whole myosin. Image processing reveals a characteristic head region morphology for both HMM and myosin whose features are identifiable by comparison with less compact molecules. The two heads associate asymmetrically: the tip of one motor domain touches the base of the other, resembling the blocked and free heads of this HMM when it forms 2-D crystals on lipid. The tail of HMM lies between the heads, contacting the blocked motor domain, unlike in the 2-D crystal. The tail of the intact myosin is bent sharply and consistently at two positions close to residues 1175 and 1535. The first bend position correlates with a skip in the coiled coil sequence, the second does not. The first segment runs between the heads from the head-tail junction. Unexpectedly, the other segments associate only with the blocked head rather than both heads, such that the second bend lies at a specific position near the C-lobe of the blocked head regulatory light chain. Quantitative analysis of tail flexibility shows that the single coiled coil of HMM has an apparent Young’s modulus of about 0.5 GPa. The folded tail of the intact molecule is less flexible indicating interactions between the segments. The folded tail does not modify the compact head arrangement but stabilises it, indicating a structural mechanism for the very low ATPase activity of the folded molecule

A diverse Late Cretaceous vertebrate tracksite from the Winton Formation of Queensland, Australia

The Upper Cretaceous ‘upper’ Winton Formation of Queensland, Australia is world famous for hosting Dinosaur Stampede National Monument at Lark Quarry Conservation Park, a somewhat controversial tracksite that preserves thousands of tridactyl dinosaur tracks attributed to ornithopods and theropods. Herein, we describe the Snake Creek Tracksite, a new vertebrate ichnoassemblage from the ‘upper’ Winton Formation, originally situated on Karoola Station but now relocated to the Australian Age of Dinosaurs Museum of Natural History. This site preserves the first sauropod tracks reported from eastern Australia, a small number of theropod and ornithopod tracks, the first fossilised crocodyliform and ?turtle tracks reported from Australia, and possible lungfish and actinopterygian feeding traces. The sauropod trackways are wide-gauge, with manus tracks bearing an ungual impression on digit I, and anteriorly tapered pes tracks with straight or concave forward posterior margins. These tracks support the hypothesis that at least one sauropod taxon from the ‘upper’ Winton Formation retained a pollex claw (previously hypothesised for Diamantinasaurus matildae based on body fossils). Many of the crocodyliform trackways indicate underwater walking. The Snake Creek Tracksite reconciles the sauropod-, crocodyliform-, turtle-, and lungfish-dominated body fossil record of the ‘upper’ Winton Formation with its heretofore ornithopod- and theropod-dominated ichnofossil record

Quality target negotiation in health care : evidence from the English NHS

We examine how public sector third-party purchasers and hospitals negotiate quality targets when a fixed proportion of hospital revenue is required to be linked to quality. We develop a bargaining model linking the number of quality targets to purchaser and hospital characteristics. Using data extracted from 153 contracts for acute hospital services in England in 2010/11, we find that the number of quality targets is associated with the purchaser’s population health and its budget, the hospital type, whether the purchaser delegated negotiation to an agency, and the quality targets imposed by the supervising regional health authority

Robust thermal control for CMOS-based lab-on-chip systems

The need for precise temperature control at small scales has provided a formidable challenge to the lab-on-chip community. It requires, at once, good thermal conductivity for high speed operation, good thermal isolation for low power consumption and the ability to have small (mm-scale) thermally independent regions on the same substrate. Most importantly, and, in addition to these conflicting requirements, there is a need to accurately measure the temperature of the active region without the need for device-to-device calibrations. We have developed and tested a design that enables thermal control of lab-on-chip devices atop silicon substrates in a way that could be integrated with the standard methods of mass-manufacture used in the electronics industry (i.e. CMOS). This is a significant step towards a single-chip lab-on-chip solution, one in which the microfluidics, high voltage electronics, optoelectronics, instrumentation electronics, and the world-chip interface are all integrated on a single substrate with multiple, independent, thermally-controlled regions based on active heating and passive cooling.Natural Sciences and Engineering Research Canada (NSERC)Teledyne-DALSA Semiconducto

Characterization of Aerosol Deposited Cesium Lead Tribromide Perovskite Films on Interdigited ITO Electrodes

Aerosol deposition (AD) is a promising additive manufacturing method to fabricate low-cost, scalable films at room temperature, but has not been considered for semiconductor processing, so far. The successful preparation of cesium lead tribromide (CsPbBr) perovskite films on interdigitated indium tin oxide (ITO) electrodes by means of AD is reported here. The – µm thick layers are dense and have good adhesion to the substrate. The orthorhombic Pnma crystal structure of the precursor powder was retained during the deposition process with no signs of defect formation. The formation of electronic defects by photoluminescence spectroscopy is investigated and found slightly increased carrier recombination from defect sites for AD films compared to the powder. A nonuniform defect distribution across the layer, presumably induced by the impact of the semiconducting grains on the hard substrate surface, is revealed. The opto-electronic properties of AD processed semiconducting films is further tested by electrical measurements and confirmed good semiconducting properties and high responsivity for the films. These results demonstrate that AD processing of metal halide perovskites is possible for opto-electronic device manufacturing on D surfaces. It is believed that this work paves the way for the fabrication of previously unimaginable opto-electronic devices by additive manufacturing

Toward optimal implementation of cancer prevention and control programs in public health: A study protocol on mis-implementation

Abstract Background Much of the cancer burden in the USA is preventable, through application of existing knowledge. State-level funders and public health practitioners are in ideal positions to affect programs and policies related to cancer control. Mis-implementation refers to ending effective programs and policies prematurely or continuing ineffective ones. Greater attention to mis-implementation should lead to use of effective interventions and more efficient expenditure of resources, which in the long term, will lead to more positive cancer outcomes. Methods This is a three-phase study that takes a comprehensive approach, leading to the elucidation of tactics for addressing mis-implementation. Phase 1: We assess the extent to which mis-implementation is occurring among state cancer control programs in public health. This initial phase will involve a survey of 800 practitioners representing all states. The programs represented will span the full continuum of cancer control, from primary prevention to survivorship. Phase 2: Using data from phase 1 to identify organizations in which mis-implementation is particularly high or low, the team will conduct eight comparative case studies to get a richer understanding of mis-implementation and to understand contextual differences. These case studies will highlight lessons learned about mis-implementation and identify hypothesized drivers. Phase 3: Agent-based modeling will be used to identify dynamic interactions between individual capacity, organizational capacity, use of evidence, funding, and external factors driving mis-implementation. The team will then translate and disseminate findings from phases 1 to 3 to practitioners and practice-related stakeholders to support the reduction of mis-implementation. Discussion This study is innovative and significant because it will (1) be the first to refine and further develop reliable and valid measures of mis-implementation of public health programs; (2) bring together a strong, transdisciplinary team with significant expertise in practice-based research; (3) use agent-based modeling to address cancer control implementation; and (4) use a participatory, evidence-based, stakeholder-driven approach that will identify key leverage points for addressing mis-implementation among state public health programs. This research is expected to provide replicable computational simulation models that can identify leverage points and public health system dynamics to reduce mis-implementation in cancer control and may be of interest to other health areas

Report on the Workshop on Transversal Variables. (Linking economic and biological effort data (call) design). 19th -23rd January 2015

The Workshop on the Transversal Variables took place in Zagreb from the 19th to 23rd of January, 2015 mainly to tackle the issues related to the increasing need of having fisheries fleet economic data and fisheries biologic data on a level of disaggregation that would allow a proper interoperability between datasets to underpin bioeconomic modelling. For that, several analyses were carried out and conclusions taken. These analyses were : 1. comparison of economic and biological effort data calls both with respect to their level of resolution and the landings and effort values obtained from equivalent aggregations was performed. This was compared to what would be needed in order to undertake bioeconomic modelling for a chosen management plan. 2. The description of how MS are calculating effort variables and a proposal on the way forward to harmonize approaches, 3. Conclusions on how to harmonize levels of resolution, the variable definitions and the codification in use amongst data calls, in order to make them comparable and based on coherent standard codifications.JRC.G.3-Maritime affair

Report of the Regional Co-ordination Meeting for the North Sea and Eastern Arctic (RCM NS&EA) 2015

The RCM NS&EA met 31st August - 4th September 2015 at den Haag, Netherlands with 27 participants form 11 member states and autonomous regions attending, including representatives of ICES and the Commission. National correspondents from Spain, UK, Denmark, Lithuania, Germany, Sweden and the Netherlands were present. The meeting was co-chaired by Katja Ringdahl (Sweden) and Alastair Pout (Scotland). The RCM N&SEA considered the recommendations from the 11th Liasion meeting and summaries were presented of the work of expert groups and end users for the 2014-15 period to the plenary session of the meeting. The expert groups included WGCATCH, PGDATA, WKISCON2, WKRDB 2014-01, RDB–SC, STECF and the Zagreb meeting on transversal variables. ICES, as a main end user, provided feedback. A summary was presented of the progress in the regional coordination project (fishPi). This project involves over 40 participants from 12 members states from NS&EA, NA and Baltic regions, two external statistical experts, and ICES. The project has a wide scope of regional cooperation issues including sampling designs, data formats, code lists, PETS, stomach sampling, small scale and recreational sampling, and data quality software production. It has a budget of €400,000, and a one year time line and with a planned completion date of April 2016. A project with identical aims is running in paralleled in the Mediterranean and Black Sea regions The majority of the ToRs of the RCM NS&EA were addressed by three subgroups: one concerned with data analysis, one with the landing obligation, and one with issues particularly related to role and work of national correspondents