Perovskite Film Formation for Solar Cell Absorbers: Effects of Substrate Modification

As perovskite solar cell efficiencies have risen rapidly, practical constraints have made durability a critical concern. Whereas much attention has been paid to the development of the perovskite absorber layer, the charge transport layers can also be engineered to better the performance and stability of the device. This work uses the molecular modifier bromopropyltrimethoxysilane (BPTMS) to alter the interface between indium tin oxide (ITO, a common thin film solar cell transparent electrode) and methylammonium lead iodide (MAPbI3, a common perovskite absorber) to improve the morphology and stability of the perovskite absorber film. The substrate, molecular modifier, and perovskite film were characterized via contact angle measurements, spectroscopic ellipsometry, and scanning electron microscopy. It was determined that the absorber film morphology and stability of the stack are sensitive to both the underlying substrate and the BPTMS

Understanding the Role Thin Film Interfaces Play in Solar Cell Performance and Stability

As more efficient and cost-effective photovoltaic (PV) architectures are developed, solar becomes an ever more competitive and viable replacement for fossil fuels. Full grid electrification necessitates the development of efficient, reliable, cost-effective technologies - and there is room for many different kinds of PV in this expanding market. The practical challenges and constraints of terawatt PV production have brought scalability and durability into sharp scientific focus. From a materials perspective, there are commonalities in the materials questions and challenges across different PV technologies. Whereas most PV technology is referred to by the absorber layer - e.g. silicon, or perovskite solar cells, other layers in the device are equally important to performance and durability. These layers are often composed of metal oxides, and are common across device technologies - for example, interfacial layers (such as charge transport layers, CTLs), and transparent conducting oxides (TCOs) used as electrodes.This work addresses materials oxide characterization and its relationship to materials and device performance and degradation across PV technologies. Among the most promising PVs to date are two technologies with different levels of thin film incorporation: silicon heterojunction (SHJ) and perovskite PV. SHJ cells are part of the industrial Si PV portfolio, and perovskite cells are starting to be commercially produced after a decade of intensive research. However, there are well-known stability and cost limitations associated with each technology. Understanding the thin film materials science in these devices, and using that understanding to enhance device performance and stability is key to more reliable and cost effective electricity production. Under practical aging conditions, careful materials-level characterization is required to understand the degradation mechanisms of these materials and the complex effects of aging on the multilayer system. This work details the effects of practical degradation challenges such as damp heat (DH) exposure and encapsulation degradation on the stability of inorganic metal oxides in both the SHJ and perovskite thin film photovoltaic architectures. For perovskite devices, MAPbI3 films were deposited by spin coating onto a range of substrates and CTLs; substrates of glass and indium tin oxide (ITO) were paired with metal oxides (MOs) including MoOX, NiOX, and ZnO. SE and SEM were used to characterize the surface and bulk properties of the perovskite films. Results demonstrate that the underlying layers affect the rate of absorber degradation when exposed to heat and moisture. Unencapsulated SHJ cells (a subset of which were exposed to low concentrations of acetic acid under an applied voltage) were aged under DH 85°C/85% relative humidity conditions. The contact-ITO interface was examined via optical profilometry (OP), spectroscopic ellipsometry (SE), and scanning electron microscopy (SEM). SHJ cells have interfaces unique to their architecture, namely the c-Si/a-Si:H and a-Si:H/ITO interfaces at the top of the device. Examining the degradation of unencapsulated SHJ cells and comparing those results to historical degradation profiles of encapsulated SHJ cells in addition to the simulated effects of acetic acid exposure will help to decouple the effects of encapsulation on ITO stability in this architecture. It is well known that ethylene vinyl acetate (EVA) encapsulation degrades and produces acetic acid upon exposure to heat and humidity. When under an applied voltage, even small concentrations of acetic acid can quickly corrode the contact-ITO interface, leading to decreases in efficiency and increases in series resistance of the cell. Here, XPS was used to monitor the changes in the front contact of the SHJ cells during DH and acetic acid exposure. Changes to the materials will be correlated to changes in device performance under the same aging conditions

Evaluationsbericht Psychologie 2011:gemeinsamer Bericht über die Evaluationen im Fach Psychologie im WiSe 10/11 und SoSe 11

<br

Evaluationsbericht Psychologie 2012:gemeinsamer Bericht über die Evaluationen im Fach Psychologie im WiSe 11/12 und SoSe 12

<br

Evaluationsbericht Psychologie 2010:gemeinsamer Bericht über die Evaluationen im Fach Psychologie im WiSe 09/10 und SoSe 10

<br

Instability of natural selection at candidate barrier loci underlying speciation in wood ants

doi: 10.1111/mec.15606Speciation underlies the generation of novel biodiversity. Yet, there is much to learn about how natural selection shapes genomes during speciation. Selection is assumed to act against gene flow at barrier loci, promoting reproductive isolation. However, evidence for gene flow and selection is often indirect and we know very little about the temporal stability of barrier loci. Here we utilize haplodiploidy to identify candidate male barrier loci in hybrids between two wood ant species. As ant males are haploid, they are expected to reveal recessive barrier loci, which can be masked in diploid females if heterozygous. We then test for barrier stability in a sample collected 10 years later and use survival analysis to provide a direct measure of natural selection acting on candidate male barrier loci. We find multiple candidate male barrier loci scattered throughout the genome. Surprisingly, a proportion of them are not stable after 10 years, natural selection apparently switching from acting against to favouring introgression in the later sample. Instability of the barrier effect and natural selection for introgressed alleles could be due to environment-dependent selection, emphasizing the need to consider temporal variation in the strength of natural selection and the stability of the barrier effect at putative barrier loci in future speciation work.Peer reviewe

Prompt neutrino fluxes from atmospheric charm

We calculate the prompt neutrino flux from atmospheric charm production by cosmic rays, using the dipole picture in a perturbative QCD framework, which incorporates the parton saturation effects present at high energies. We compare our results with the next-to-leading order perturbative QCD result and find that saturation effects are large for neutrino energies above 10^6 GeV, leading to a substantial suppression of the prompt neutrino flux. We comment on the range of prompt neutrino fluxes due to theoretical uncertainties.Comment: 13 pages with 11 figures; expanded discussion, added references, version to be published in Phys. Rev.

ERBB and P‐glycoprotein inhibitors break resistance in relapsed neuroblastoma models through P‐glycoprotein

Chemotherapy resistance is a persistent clinical problem in relapsed high-risk neuroblastomas. We tested a panel of 15 drugs for sensitization of neuroblastoma cells to the conventional chemotherapeutic vincristine, identifying tariquidar, an inhibitor of the transmembrane pump P-glycoprotein (P-gp/ABCB1), and the ERBB family inhibitor afatinib as the top resistance breakers. Both compounds were efficient in sensitizing neuroblastoma cells to vincristine in trypan blue exclusion assays and in inducing apoptotic cell death. The evaluation of ERBB signaling revealed no functional inhibition, i.e., dephosphorylation of the downstream pathways upon afatinib treatment but direct off-target interference with P-gp function. Depletion of ABCB1, but not ERRB4, sensitized cells to vincristine treatment. P-gp inhibition substantially broke vincristine resistance in vitro and in vivo (zebrafish embryo xenograft). The analysis of gene expression datasets of more than 50 different neuroblastoma cell lines (primary and relapsed) and more than 160 neuroblastoma patient samples from the pediatric precision medicine platform INFORM (Individualized Therapy For Relapsed Malignancies in Childhood) confirmed a pivotal role of P-gp specifically in neuroblastoma resistance at relapse, while the ERBB family appears to play a minor part