On the Effectiveness of Dry Film Lubricant Coatings in Reducing Automotive Valve Train Wear

The effect of three dry lubricants on automotive valve train wear resistance was studied experimentally. Scuffing wear occurs as the cam slides across the lifter face where the rotating motion of the camshaft is converted into the linear motion necessary to drive the cylinder head valves. This scuffing is caused by localized microscopic bonding between the skidding surfaces. It can be minimized by using dry film lubricant coatings to increase the boundary lubrication depth adjacent to the contact area. To compare valve train wear resistance in the laboratory, rotating cam lobes coated with dry lubricants--parkerization, spray-applied graphite coating, and brush-applied molybdenum disulfide coating-were pressed against valve lifters that were constrained in a fixture. The brush-applied molybdenum disulfide coating was the most effective of the three tested lubricants in reducing scuffing wear

On the Reuse of Bolts Which Have Been Torqued to Yield

Bolts are torqued to yield in automotive engines to fasten aluminum alloy cylinder heads to cast iron cylinder blocks. This tightening method provides a reliable, even, and controllable clamping force that prevents warping of the soft cylinder head and ensures a leak-tight joint. It has one drawback: Since the bolts yield during engine assembly, they work harden even as their ultimate strength decreases. Upon reuse, yield stress more closely approaches ultimate strength. Fastener geometry and mechanical properties, now changed, supply changed joint-clamping force. For reasons such as these. Ford Motor Company recommends that bolts torqued to yield be replaced each time an engine is rebuilt. Cost savings, however, could be realized if engine remanufacturers could reuse these fasteners even once. In this article, reuse of SAE 10-mm cylinder head fasteners is simulated in the laboratory for a Ford I.9-liter four-cylinder engine. Based on tensile test data of yielded bolts, recommendations are made discouraging their reuse

Половці: етнічна культура

У статті розглядаються структурні складові етнічної культури, формування якої відбувалося у процесі синтезу первинних і вторинних генеруючих чинників ретроспекції життєдіяльності номадів.В статье рассматриваются структурные составные этнической культуры, формирование которой осуществлялось в процессе синтеза первичных и вторичных генерирующих факторов ретроспекции жизнедеятельности номадов.Structural components of ethnic culture, formation of which was realized in the process of synthesis of primary and secondary generating factors of retrospection of nomads’ life activities are considered in the article

Topical and Systemic Cannabidiol Improves Trinitrobenzene Sulfonic Acid Colitis in Mice

Background/Aims: Compounds of Cannabis sativa are known to exert anti-inflammatory properties, some of them without inducing psychotropic side effects. Cannabidiol (CBD) is such a side effect-free phytocannabinoid that improves chemically induced colitis in rodents when given intraperitoneally. Here, we tested the possibility whether rectal and oral application of CBD would also ameliorate colonic inflammation, as these routes of application may represent a more appropriate way for delivering drugs in human colitis. Methods: Colitis was induced in CD1 mice by trinitrobenzene sulfonic acid. Individual groups were either treated with CBD intraperitoneally (10 mg/kg), orally (20 mg/kg) or intrarectally (20 mg/kg). Colitis was evaluated by macroscopic scoring, histopathology and the myeloperoxidase (MPO) assay. Results: Intraperitoneal treatment of mice with CBD led to improvement of colonic inflammation. Intrarectal treatment with CBD also led to a significant improvement of disease parameters and to a decrease in MPO activity while oral treatment, using the same dose as per rectum, had no ameliorating effect on colitis. Conclusion: The data of this study indicate that in addition to intraperitoneal application, intrarectal delivery of cannabinoids may represent a useful therapeutic administration route for the treatment of colonic inflammation. Copyright (C) 2012 S. Karger AG, Base

Embracing additive manufacture: implications for foot and ankle orthosis design

<p>Abstract</p> <p>Background</p> <p>The design of foot and ankle orthoses is currently limited by the methods used to fabricate the devices, particularly in terms of geometric freedom and potential to include innovative new features. Additive manufacturing (AM) technologies, where objects are constructed via a series of sub-millimetre layers of a substrate material, may present the opportunity to overcome these limitations and allow novel devices to be produced that are highly personalised for the individual, both in terms of fit and functionality.</p> <p>Two novel devices, a foot orthosis (FO) designed to include adjustable elements to relieve pressure at the metatarsal heads, and an ankle foot orthosis (AFO) designed to have adjustable stiffness levels in the sagittal plane, were developed and fabricated using AM. The devices were then tested on a healthy participant to determine if the intended biomechanical modes of action were achieved.</p> <p>Results</p> <p>The adjustable, pressure relieving FO was found to be able to significantly reduce pressure under the targeted metatarsal heads. The AFO was shown to have distinct effects on ankle kinematics which could be varied by adjusting the stiffness level of the device.</p> <p>Conclusions</p> <p>The results presented here demonstrate the potential design freedom made available by AM, and suggest that it may allow novel personalised orthotic devices to be produced which are beyond the current state of the art.</p

Analyzing Recent Coronary Heart Disease Mortality Trends in Tunisia between 1997 and 2009.

BACKGROUND: In Tunisia, Cardiovascular Diseases are the leading causes of death (30%), 70% of those are coronary heart disease (CHD) deaths and population studies have demonstrated that major risk factor levels are increasing. OBJECTIVE: To explain recent CHD trends in Tunisia between 1997 and 2009. METHODS: DATA SOURCES: Published and unpublished data were identified by extensive searches, complemented with specifically designed surveys. ANALYSIS: Data were integrated and analyzed using the previously validated IMPACT CHD policy model. Data items included: (i)number of CHD patients in specific groups (including acute coronary syndromes, congestive heart failure and chronic angina)(ii) uptake of specific medical and surgical treatments, and(iii) population trends in major cardiovascular risk factors (smoking, total cholesterol, systolic blood pressure (SBP), body mass index (BMI), diabetes and physical inactivity). RESULTS: CHD mortality rates increased by 11.8% for men and 23.8% for women, resulting in 680 additional CHD deaths in 2009 compared with the 1997 baseline, after adjusting for population change. Almost all (98%) of this rise was explained by risk factor increases, though men and women differed. A large rise in total cholesterol level in men (0.73 mmol/L) generated 440 additional deaths. In women, a fall (-0.43 mmol/L), apparently avoided about 95 deaths. For SBP a rise in men (4 mmHg) generated 270 additional deaths. In women, a 2 mmHg fall avoided 65 deaths. BMI and diabetes increased substantially resulting respectively in 105 and 75 additional deaths. Increased treatment uptake prevented about 450 deaths in 2009. The most important contributions came from secondary prevention following Acute Myocardial Infarction (AMI) (95 fewer deaths), initial AMI treatments (90), antihypertensive medications (80) and unstable angina (75). CONCLUSIONS: Recent trends in CHD mortality mainly reflected increases in major modifiable risk factors, notably SBP and cholesterol, BMI and diabetes. Current prevention strategies are mainly focused on treatments but should become more comprehensive

Retrospective model-based inference guides model-free credit assignment

An extensive reinforcement learning literature shows that organisms assign credit efficiently, even under conditions of state uncertainty. However, little is known about credit-assignment when state uncertainty is subsequently resolved. Here, we address this problem within the framework of an interaction between model-free (MF) and model-based (MB) control systems. We present and support experimentally a theory of MB retrospective-inference. Within this framework, a MB system resolves uncertainty that prevailed when actions were taken thus guiding an MF credit-assignment. Using a task in which there was initial uncertainty about the lotteries that were chosen, we found that when participants’ momentary uncertainty about which lottery had generated an outcome was resolved by provision of subsequent information, participants preferentially assigned credit within a MF system to the lottery they retrospectively inferred was responsible for this outcome. These findings extend our knowledge about the range of MB functions and the scope of system interactions

An ultraviolet-optical flare from the tidal disruption of a helium-rich stellar core

The flare of radiation from the tidal disruption and accretion of a star can be used as a marker for supermassive black holes that otherwise lie dormant and undetected in the centres of distant galaxies. Previous candidate flares have had declining light curves in good agreement with expectations, but with poor constraints on the time of disruption and the type of star disrupted, because the rising emission was not observed. Recently, two `relativistic' candidate tidal disruption events were discovered, each of whose extreme X-ray luminosity and synchrotron radio emission were interpreted as the onset of emission from a relativistic jet. Here we report the discovery of a luminous ultraviolet-optical flare from the nuclear region of an inactive galaxy at a redshift of 0.1696. The observed continuum is cooler than expected for a simple accreting debris disk, but the well-sampled rise and decline of its light curve follows the predicted mass accretion rate, and can be modelled to determine the time of disruption to an accuracy of two days. The black hole has a mass of about 2 million solar masses, modulo a factor dependent on the mass and radius of the star disrupted. On the basis of the spectroscopic signature of ionized helium from the unbound debris, we determine that the disrupted star was a helium-rich stellar core.Comment: To appear in Nature on May 10, 201

Origin of symbol-using systems: speech, but not sign, without the semantic urge

Natural language—spoken and signed—is a multichannel phenomenon, involving facial and body expression, and voice and visual intonation that is often used in the service of a social urge to communicate meaning. Given that iconicity seems easier and less abstract than making arbitrary connections between sound and meaning, iconicity and gesture have often been invoked in the origin of language alongside the urge to convey meaning. To get a fresh perspective, we critically distinguish the origin of a system capable of evolution from the subsequent evolution that system becomes capable of. Human language arose on a substrate of a system already capable of Darwinian evolution; the genetically supported uniquely human ability to learn a language reflects a key contact point between Darwinian evolution and language. Though implemented in brains generated by DNA symbols coding for protein meaning, the second higher-level symbol-using system of language now operates in a world mostly decoupled from Darwinian evolutionary constraints. Examination of Darwinian evolution of vocal learning in other animals suggests that the initial fixation of a key prerequisite to language into the human genome may actually have required initially side-stepping not only iconicity, but the urge to mean itself. If sign languages came later, they would not have faced this constraint

Activation of Type 1 Cannabinoid Receptor (CB1R) promotes neurogenesis in murine subventricular zone cell cultures

The endocannabinoid system has been implicated in the modulation of adult neurogenesis. Here, we describe the effect of type 1 cannabinoid receptor (CB1R) activation on self-renewal, proliferation and neuronal differentiation in mouse neonatal subventricular zone (SVZ) stem/progenitor cell cultures. Expression of CB1R was detected in SVZ-derived immature cells (Nestin-positive), neurons and astrocytes. Stimulation of the CB1R by (R)-(+)-Methanandamide (R-m-AEA) increased self-renewal of SVZ cells, as assessed by counting the number of secondary neurospheres and the number of Sox2+/+ cell pairs, an effect blocked by Notch pathway inhibition. Moreover, R-m-AEA treatment for 48 h, increased proliferation as assessed by BrdU incorporation assay, an effect mediated by activation of MAPK-ERK and AKT pathways. Surprisingly, stimulation of CB1R by R-m-AEA also promoted neuronal differentiation (without affecting glial differentiation), at 7 days, as shown by counting the number of NeuN-positive neurons in the cultures. Moreover, by monitoring intracellular calcium concentrations ([Ca2+](i)) in single cells following KCl and histamine stimuli, a method that allows the functional evaluation of neuronal differentiation, we observed an increase in neuronal-like cells. This proneurogenic effect was blocked when SVZ cells were co-incubated with R-m-AEA and the CB1R antagonist AM 251, for 7 days, thus indicating that this effect involves CB1R activation. In accordance with an effect on neuronal differentiation and maturation, R-m-AEA also increased neurite growth, as evaluated by quantifying and measuring the number of MAP2-positive processes. Taken together, these results demonstrate that CB1R activation induces proliferation, self-renewal and neuronal differentiation from mouse neonatal SVZ cell cultures.Fundacao para a Ciencia e a Tecnologia - Portugal [POCTI/SAU-NEU/68465/2006, PTDC/SAU-NEU/104415/2008, PTDC/SAU-NEU/101783/2008, POCTI/SAU-NEU/110838/2009]; Fundacao Calouste Gulbenkian [96542]; Fundacao para a Ciencia e Tecnologiainfo:eu-repo/semantics/publishedVersio