1,528 research outputs found
Accumulation and thermalization of cold atoms in a finite-depth magnetic trap
We experimentally and theoretically study the continuous accumulation of cold
atoms from a magneto-optical trap (MOT) into a finite depth trap, consisting in
a magnetic quadrupole trap dressed by a radiofrequency (RF) field. Chromium
atoms (52 isotope) in a MOT are continuously optically pumped by the MOT lasers
to metastable dark states. In presence of a RF field, the temperature of the
metastable atoms that remain magnetically trapped can be as low as 25 microK,
with a density of 10^17 atoms.m-3, resulting in an increase of the phase-space
density, still limited to 7.10^-6 by inelastic collisions. To investigate the
thermalization issues in the truncated trap, we measure the free evaporation
rate in the RF-truncated magnetic trap, and deduce the average elastic cross
section for atoms in the 5D4 metastable states, equal to 7.0 10^-16m2.Comment: 9 pages, 10 Figure
Transcript profiling in Candida albicans reveals new cellular functions for the transcriptional repressors CaTup1, CaMig1 and CaNrg1.
The pathogenic fungus, Candida albicans contains homologues of the transcriptional repressors ScTup1, ScMig1 and ScNrg1 found in budding yeast. In Saccharomyces cerevisiae, ScMig1 targets the ScTup1/ScSsn6 complex to the promoters of glucose repressed genes to repress their transcription. ScNrg1 is thought to act in a similar manner at other promoters. We have examined the roles of their homologues in C. albicans by transcript profiling with an array containing 2002 genes, representing about one quarter of the predicted number of open reading frames (ORFs) in C. albicans. The data revealed that CaNrg1 and CaTup1 regulate a different set of C. albicans genes from CaMig1 and CaTup1. This is consistent with the idea that CaMig1 and CaNrg1 target the CaTup1 repressor to specific subsets of C. albicans genes. However, CaMig1 and CaNrg1 repress other C. albicans genes in a CaTup1-independent fashion. The targets of CaMig1 and CaNrg1 repression, and phenotypic analyses of nrg1/nrg1 and mig1/mig1 mutants, indicate that these factors play differential roles in the regulation of metabolism, cellular morphogenesis and stress responses. Hence, the data provide important information both about the modes of action of these transcriptional regulators and their cellular roles. The transcript profiling data are available at http://www.pasteur.fr/recherche/unites/RIF/transcriptdata/
Thermo-Economic Modelling and Process Integration of CO2-Mitigation Options on Oil and Gas Platforms
The offshore extraction of oil and gas is an energy-intensive process associated with large CO2 and CH4 emissions to the atmosphere and chemicals to the sea. The taxation of these emissions has encouraged the development of more energy-efficient and environmental-friendly solutions, of which three are assessed in this paper. The integration of steam bottoming cycles on the gas turbines or of low-temperature power cycles on the export gas compression can result either in an additional power output, or in a greater export of natural gas. Another possibility is to implement a CO2-capture unit, which allows recovering CO2 that can be used for enhanced oil recovery. In this paper, a North Sea platform is considered as case study, and the site-scale retrofit integration of these three options is analysed, considering thermodynamic, economic and environmental performance indicators. The results illustrate the benefits of valorising the waste heat recovered from the exhaust gases, as the total CO2-emissions can be reduced by more than 15 %. Exploiting low-temperature heat seems feasible, although more challenging in retrofit situations. Integrating CO2-capture appears promising with a CO2-avoidance cost between 23 and 29 /tCO2 for the chosen economic assumptions
Structural studies provide new insights into the role of lysine acetylation on substrate recognition by CARM1 and inform the design of potent peptidomimetic inhibitors
Microbial Biotechnolog
Anharmonicity in a double hydrogen transfer reaction studied in a single porphycene molecule on a Cu(110) surface
New proposal for production of bioactive compounds by supercritical technology integrated to a sugarcane biorefinery
The construction of a supercritical fluid extraction (SFE) plant inside or in close proximity to a sugarcane biorefinery producing first and second generation ethanol demonstrated to be very promising, increasing the economic potential of the SFE process in up to 57 %, since the SFE plant could use directly the ethanol, CO2, heat, and electricity already available, with lower prices. In this study, Brazilian ginseng roots were used as model bioactive compounds source and first the statistical influence of the extraction conditions including pressure (10-20 MPa), temperature (323-363 K), and CO2/ethanol proportion ratio (90:10, 50:50, and 0:100 %, w/w) on the beta-ecdysone content in the extracts was experimentally evaluated and compared with literature results. SFE process evaluated experimentally at the present study showed higher selective extraction for beta-ecdysone from Brazilian ginseng roots, providing an extract with up to 2.16 times higher beta-ecdysone than the results obtained in previous studies. Thermal integration of the SFE process diminished energy requirements of the process, resulting in a reduction of cold utility requirement of 87 % and a final electricity demand of 7.5 kWh/g of beta-ecdysone in the extract. In a situation in which the Brazilian ginseng roots price was increased to 4.71 USD/g, only the SFE integrated with the biorefinery solution would be economically feasible. Finally, the selling of the ginseng roots leftover could be an interesting answer to increase the economical attractiveness of the integrated SFE process to the biorefinery
Coupling effects in the elastic scattering of He on C
To study the effect of the weak binding energy on the interaction potential between a light exotic nucleus and a target, elastic scattering of 6He at 38.3 MeV/nucleon on a 12C target was measured at Grand Accélérateur National d'Ions Lourds (GANIL). The 6He beam was produced by fragmentation. The detection of the scattered particles was performed by the GANIL spectrometer. The energy resolution was good enough to separate elastic from inelastic scattering contributions. The measured elastic data have been analyzed within the optical model, with the real part of the optical potential calculated in the double-folding model using a realistic density-dependent nucleon-nucleon interaction and the imaginary part taken in the conventional Woods-Saxon (WS) form. A failure of the "bare" real folded potential to reproduce the measured angular distribution over the whole angular range suggests quite a strong coupling of the higher-order breakup channels to the elastic channel. To estimate the strength of the breakup effects, a complex surface potential with a repulsive real part (designed to simulate the polarization effects caused by the projectile breakup) was added to the real folded and imaginary WS potentials. A realistic estimate of the polarization potential caused by the breakup of the weakly bound 6He was made based on a parallel study of 6He+12C and 6Li+12C optical potentials at about the same energies
A SUCCESSFUL COLLABORATION BETWEEN ADULT AND PEDIATRIC INTENSIVISTS: VENO-VENOUS EXTRACORPOREAL MEMBRANE OXYGENATION FOR A PEDIATRIC PATIENT WITH LIFE-THREATENING TRACHEAL OBSTRUCTION
peer reviewe
Determination of the b quark mass at the M_Z scale with the DELPHI detector at LEP
An experimental study of the normalized three-jet rate of b quark events with
respect to light quarks events (light= \ell \equiv u,d,s) has been performed
using the CAMBRIDGE and DURHAM jet algorithms. The data used were collected by
the DELPHI experiment at LEP on the Z peak from 1994 to 2000. The results are
found to agree with theoretical predictions treating mass corrections at
next-to-leading order. Measurements of the b quark mass have also been
performed for both the b pole mass: M_b and the b running mass: m_b(M_Z). Data
are found to be better described when using the running mass. The measurement
yields: m_b(M_Z) = 2.85 +/- 0.18 (stat) +/- 0.13 (exp) +/- 0.19 (had) +/- 0.12
(theo) GeV/c^2 for the CAMBRIDGE algorithm. This result is the most precise
measurement of the b mass derived from a high energy process. When compared to
other b mass determinations by experiments at lower energy scales, this value
agrees with the prediction of Quantum Chromodynamics for the energy evolution
of the running mass. The mass measurement is equivalent to a test of the
flavour independence of the strong coupling constant with an accuracy of 7
permil.Comment: 24 pages, 10 figures, Accepted by Eur. Phys. J.
- …