Evolution of virtual learning environments in chemistry education

Visual information plays a central role in chemistry. The evolution of computational technologies in the last decade brought new opportunities to develop virtual learning chemistry environments to education that might change the ways of presenting and visualizing the chemistry knowledge. In this paper we present ten virtual learning environments related to chemistry teaching, and we compare them in terms of functionalities of visualization, virtual manipulation and possibility of creating new chemical structures

Critical exponents from parallel plate geometries subject to periodic and antiperiodic boundary conditions

We introduce a renormalized 1PI vertex part scalar field theory setting in momentum space to computing the critical exponents $\nu$ and $\eta$, at least at two-loop order, for a layered parallel plate geometry separated by a distance L, with periodic as well as antiperiodic boundary conditions on the plates. We utilize massive and massless fields in order to extract the exponents in independent ultraviolet and infrared scaling analysis, respectively, which are required in a complete description of the scaling regions for finite size systems. We prove that fixed points and other critical amounts either in the ultraviolet or in the infrared regime dependent on the plates boundary condition are a general feature of normalization conditions. We introduce a new description of typical crossover regimes occurring in finite size systems. Avoiding these crossovers, the three regions of finite size scaling present for each of these boundary conditions are shown to be indistinguishable in the results of the exponents in periodic and antiperiodic conditions, which coincide with those from the (bulk) infinite system.Comment: Modified introduction and some references; new crossover regimes discussion improved; Appendixes expanded. 48 pages, no figure

Overcoming inertia : drivers of the outsourcing process

Almost all managers have directly or indirectly been involved in the practice of outsourcing in recent years. But as they know, outsourcing is not straightforward. Outsourcing inertia, when companies are slow to adapt to changing circumstances that accommodate higher outsourcing levels, may undermine a firm’s performance. This article investigates the presence of outsourcing inertia and the factors that help managers overcome it. Using statistical evidence, we show that positive performance effects related to outsourcing can accumulate when circumstances change. This is then followed by rapid increases in outsourcing levels (i.e. outsourcing processes). We investigate what gives rise to these outsourcing processes through follow-up interviews with sourcing executives, which suggest five drivers behind outsourcing processes: managerial initiative (using outside experience); hierarchy (foreign headquarters); imitation (of competitors and of similar firms); outsider advice (from external institutions); knowledge sources (using external information). These five drivers all offer scope for managerial action. We tie them to academic literatures and suggest ways of investigating their presence and impact on the outsourcing process. Overall, we conclude that while economizing factors play a key role in explaining how much firms outsource, it is socializing factors that tend to drive outsourcing processes

Crystallographic texture evolution in Ti–35Nb alloy deformed by cold rolling

This work presents the results of a microstructural characterization of the Ti–35Nb alloy deformed by cold rolling. Initially, samples of the Ti–35Nb (wt%) alloy were obtained by electric arc melting. After melting, these samples were solution heat-treated at 1000 °C for 8 h and water quenched. The resulting microstructure was composed of β-phase (bcc) combined with orthorhombic martensite (α″). Samples were cold-rolled in multiple passes to reduce their thickness by up to 85% without intermediary annealing. They were then characterized by light optical microscopy, X-ray diffraction and Vickers hardness measurements. Young’s modulus was determined by ultrasonic methods and nanoindentation measurements. The texture evolution and orientation relationship between phases were studied by X-ray diffraction and electron backscatter diffraction (EBSD). The results reveal the presence of shear bands in the deformed samples, an orientation of the orthorhombic martensite phase in relation to the rolling direction, and variations of Young’s modulus in response to deformation. The textural results of the β-phase show a typical bcc rolling texture with strong (1 1 0) fiber and weak (1 1 1) fiber. The intensity of the (1 1 0) fiber increases with deformation60653660CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQCOORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPESFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPNão temNão temNão temThe authors gratefully acknowledge the Brazilian research funding agencies FAPESP (State of São Paulo Research Foundation), CNPq (National Council for Scientific and Technological Development) and CAPES (Federal Agency for the support and Evaluation of Graduate Education) for their financial support of this wor

Caracterização química e avaliação das atividades antibacteriana, antifúngica, antimicobacteriana e citotóxica de Talinum paniculatum

In this study, the bioactivity of Talinum paniculatum was evaluated, a plant widely used in folk medicine. The extract from the T. paniculatum leaves (LE) was obtained by percolation with ethanol-water and then subjecting it to liquid-liquid partitions, yielding hexane (HX), ethyl acetate (EtOAc), butanol (BuOH), and aqueous (Aq) fractions. Screening for antimicrobial activity of the LE and its fractions was evaluated in vitro through broth microdilution method, against thirteen pathogenic and non-pathogenic microorganisms, and the antimycobacterial activity was performed through agar diffusion assay. The cytotoxic concentrations (CC90) for LE, HX, and EtOAc were obtained on BHK-21 cells by using MTT reduction assay. The LE showed activity against Serratia marcescens and Staphylococcus aureus, with Minimum Inhibitory Concentration (MIC) values of 250 and 500 µg/mL, respectively. Furthermore, HX demonstrated outstanding activity against Micrococcus luteus and Candida albicans with a MIC of 31.2 µg/mL in both cases. The MIC for EtOAc also was 31.2 µg/mL against Escherichia coli. Conversely, BuOH and Aq were inactive against all tested microorganisms and LE proved inactive against Mycobacterium tuberculosisand Mycobacterium bovisas well. Campesterol, stigmasterol, and sitosterol were the proposed structures as main compounds present in the EF and HX/EtOAc fractions, evidenced by mass spectrometry. Therefore, LE, HX, and EtOAc from T. paniculatumshowed potential as possible sources of antimicrobial compounds, mainly HX, for presenting low toxicity on BHK-21 cells with excellent Selectivity Index (SI = CC90/MIC) of 17.72 against C. albicans.Neste estudo foi avaliada a bioatividade de Talinum paniculatum, planta amplamente utilizada na medicina popular. O extrato das folhas (EF) de T. paniculatum foi obtido por percolação com etanol-água e, em seguida, submetido à partição líquido-líquido, obtendo-se as frações hexânica (HX), acetato-etílica (AcOEt), butanólica (BuOH) e aquosa (Aq). A triagem para a atividade antimicrobiana do EF e de suas frações foram avaliadas in vitro através do método de microdiluição em caldo contra treze micro-organismos patogênicos e não-patogênicos e, a atividade antimicobacteriana, foi avaliada através do teste de difusão em ágar. As concentrações citotóxicas (CC90) do EF e das frações HX e AcOEt foram obtidas sobre células da linhagem BHK-21 através do ensaio de redução do MTT. O EF mostrou atividade contra Serratia marcescens e Staphylococcus aureus, com valores de concentração inibitória mínima (CIM) de 250 e 500 µg/mL, respectivamente. Além disso, HX demonstrou excelente atividade contra Micrococcus luteus e Candida albicans com uma CIM de 31,2 µg/mL, em ambos os casos. Contra Escherichia coli, a CIM para AcOEt foi também de 31,2 µg/mL. Por outro lado, as frações BuOH e Aq foram inativas contra todos os micro-organismos testados, assim como o EF contra Mycobacterium tuberculosis e Mycobacterium bovis. Campesterol, estigmasterol e sitosterol foram as estruturas propostas como principais compostos presentes no EF e nas frações HX e AcOEt, evidenciadas através de espectrometria de massas. Portanto, o extrato da folha e as frações HX e AcOEt provenientes de T. paniculatum apresentaram potencial como possíveis fontes de compostos antimicrobianos, HX principalmente, por ter apresentado uma baixa toxicidade sobre células BHK-21 com um bom índice de seletividade (IS = CC90/MIC) de 17,72 contra C. albicans

Productivity of three sugarcane cultivars under dry and drip irrigated management

O objetivo neste trabalho foi estudar o efeito da tecnologia de irrigação por gotejamento, em cultivares de cana-de-açúcar, em dois ciclos de produção (cana-planta e cana-soca). O delineamento experimental utilizado foi o de blocos ao acaso, com quatro repetições, constituídos pela combinação de três cultivares de cana-de-açúcar: RB867515; RB855536 e SP80-3280, e dois manejos da cultura: sistema de irrigação por gotejamento subterrâneo e sistema de sequeiro, totalizando seis tratamentos. O primeiro ciclo teve duração de 336 dias, ocorrendo precipitação de 1.480 mm. O volume de água disponibilizado pelo sistema de irrigação por gotejamento foi de 400 mm, totalizando 1.880 mm. O segundo ciclo teve duração de 365 dias, cujo volume de água por meio de precipitação foi de 1.394 mm; somados aos 320 mm fornecidos pelo sistema de irrigação, totalizaram 1.714 mm. Ocorreu interação entre manejo e cultivar para as variáveis: produtividade de colmos (TCH) e produtividade de açúcar (TPH) em que a maior diferença foi observada para a cultivar SP80-3280. As cultivares apresentaram respostas diferenciadas na eficiência de utilização da água. No manejo irrigado por gotejamento houve elevação de 24% na produtividade de colmos e de 23% na produtividade de açúcar, em relação ao manejo de sequeiro.This study aimed to evaluate the effect of drip irrigation technology in different sugarcane varieties in two crop cycles (plant cane and ratoon). The experimental design was in completly randomized blocks, in split-plot with four replications, constituted by three sugarcane genotypes: RB867515; RB855536 and SP80-3280 and two crop management: drip irrigation system and rainfed system, totalizing six treatments. The first cycle lasted for 336 days, with rainfall of 1,480 mm. The volume of water provided by the system of drip irrigation was 400 mm, totaling 1,880 mm. The second cycle lasted for 365 days, the volume of water through rainfall was 1,394 mm, added to 320 mm provided by the system of irrigation, totaled 1,714 mm. Interaction between management and cultivars was found significant for the variables: productivity of stalks (TCH) and sugar yield (TPH), in which the largest difference was observed for cultivar SP80-3280. There was significant response to drip irrigation, on average the increase of production of stalks and sugar was 24 and 23%, respectively

Splicing Factors in Breast Cancer: Drivers of the Breast Tumor Fate

Splicing is a critical step in gene expression, responsible for the excision of introns, producing the mature form of mRNA. Also, the possible arrangements of exons enlarge the proteome in 80%, enabling one gene to encode more than one protein isoform, thus increasing proteome. Growing data show deregulation of splicing events in cancer, being breast cancer the most studied. This aberrant pattern of splicing has an important role in breast tumor progression. These alterations are mainly caused by misexpression of some critical alternative splicing factors. The behavior of these splicing factors is implicated with important clinical features, such as chemoresistance, aggressiveness, and also metastases. In this chapter, the role of five splicing factors is discussed in the light of relevant data about in vitro, in vivo, and ex vivo studies to construct a representative scheme of their behavior in breast cancer progression. Although the presented five splicing factors have important role in breast cancer, only three of them (ESRP1, RBFOX2, and SRSF1) have a more prominent role in tumorigenesis and tumor progression. These concepts will elucidate their role in tumorigenesis and a prospective use as biomarkers in breast cancer

The Borborema Pegmatite Province, NE-Brazil revisited

Considering the internal structure, mineralogical distribution and geochemical data on K-feldspar, white micas, Nb-Taoxides, tourmalines, garnet and spinel, it becomes clear that the pegmatites classified as "heterogeneous" (Johnston 1945) include examples of several types and subtypes of LCT family, Rare Element Class pegmatites if the modern pegmatite classification models of Černý & Ercit 2005 are applied: at least examples of the beryl-columbite, beryl-columbite-phosphate and complex-spodumene,complex-lepidolite (±gemmologic elbaite)and albite (± cassiterite) pegmatite types and subtypes were ntatively identified. The impossibility to determine a granitelinked zoned regional distribution of these types may be the result of the fact that there is no single central source pluton but several smaller granitic intrusions in the province and the zoning around them may overlap each other

Thermoresponsive Triblock‐Copolymers of Polyethylene Oxide and Polymethacrylates: Linking Chemistry, Nanoscale Morphology, and Rheological Properties

© 2021 The Authors. Advanced Functional Materials published by Wiley-VCH GmbH. This is an open access article under the terms of the Creative Commons Attribution License, https://creativecommons.org/licenses/by/4.0/Abstract: Thermoreversible gels switch from a free‐flowing liquid state to an elastic gel mesophase upon warming, displaying the reverse transition upon cooling. While this phenomenon makes these advanced materials highly attractive in numerous fields, the generation of optimal materials of tailored rheology and transition temperatures is stifled by the lack of design principles. To address this need, a library of ABA copolymers has been prepared with “A” blocks exhibiting thermoresponsive behavior and “B” blocks of poly(ethylene glycol). This library evaluates the effect of “A” chemistry, probing three polymer classes, and A/B block molecular weight on thermally‐induced phase changes in solutions of the polymers. An exploration by rheometry coupled to Small‐Angle Neutron Scattering (SANS) elucidates temperature‐dependent hierarchical self‐assembly processes occurring on the nanoscale as well as bulk rheology. This process deciphered links between rheology and supracolloidal assemblies (sphere, ellipses, and cylinders) within the gel state with interactions probed further via structure factors. Several design principles are identified to inform the genesis of next‐generation thermoreversible gels, alongside novel materials exhibited thermoresponsive behavior in the solution state for use in applied healthcare technologies.Peer reviewedFinal Published versio